Instruction/ maintenance manual of the product HD7084P Winegard
Go to page of 2
VHF/UHF MODEL HD7084P & HD7697P Winegard Company • 3000 Kirkwood Street • Burlington, IA 52601-2000 NOTE T o prevent damage in shipping, the second set of elements from the rear of the boom are folded to the reverse side. Y ou can identify these elements by the tags attached to them.
STEP 10. T o attach the cartridge hous- ing to the antenna, align the snaps on the cartridge housing with the snap holes on the cartridge housing receptacle on the antenna and push the housing into the receptacle until it snaps into place. See Figure 8.
An important point after buying a device Winegard HD7084P (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Winegard HD7084P yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Winegard HD7084P - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Winegard HD7084P you will learn all the available features of the product, as well as information on its operation. The information that you get Winegard HD7084P will certainly help you make a decision on the purchase.
If you already are a holder of Winegard HD7084P, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Winegard HD7084P.
However, one of the most important roles played by the user manual is to help in solving problems with Winegard HD7084P. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Winegard HD7084P along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
