Instruction/ maintenance manual of the product 1000 Winegard
Go to page of 8
Replacement DISH ® 1000 LNB Assembly www .winegard.com/mobile For T echnical Services, email help@winegard.com or call 1-800-788-4417 2452138.
F ollow the steps below to raise the antenna for reflector , bracket, and LNB assembly removal. P ay attention to the pinch points as the antenna raises. See below . Press [POWER] , and hold for two seconds to turn on the TRA V’LER ® interface box.
If converting a DIRECTV SWM Slimline antenna to a DISH TRA V’LER antenna, remove the power inserter and SWM splitter; these will not be used. Remove the four reflector nuts and bolts, and remove the dish. Set the nuts and bolts aside. Disconnect the coaxial cables from the turret.
Remove the bolts holding the reflector bracket to the skew housing. NOTE If replacing a Slimline assembly with a DISH assembly , remove and set aside the stiffener plate inside the reflector bracket.
Align the four holes on the inside of the reflector bracket with the four marked holes in the adaptor plate. See image below for the holes to align with the reflector bracket and adaptor plate. The numbers on the reflector bracket and adaptor plate should match.
Press and hold [POWER] for two seconds or until the TRA V ’LER interface displays “POWER ON .” Now that the power is on, release the [POWER] button. Press and hold the [ENTER] button for two seconds.The TRA V ’LER interface will ask if you wish to enter the User Menu.
If you had to raise the antenna with the emergency manual stow drive, follow the instructions below for calibrating the elevation motor . From the installation menu, press [SELECT] to move the asterisk to “Calibrate EL ”; then, press [ENTER] . Press [SELECT] to move the asterisk to “Y es.
Return the package to 3111 Kirkwood St., Burlington, IA 52601. If a label has not been provided, use Winegard’s UPS shipping account, 530400, to return the package to Winegard Company . Place another two sheets of void fill in the cardboard box, and place the LNB on top of these sheets of void fill.
An important point after buying a device Winegard 1000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Winegard 1000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Winegard 1000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Winegard 1000 you will learn all the available features of the product, as well as information on its operation. The information that you get Winegard 1000 will certainly help you make a decision on the purchase.
If you already are a holder of Winegard 1000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Winegard 1000.
However, one of the most important roles played by the user manual is to help in solving problems with Winegard 1000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Winegard 1000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
