Instruction/ maintenance manual of the product PJ2AIE Windsor
Go to page of 12
8603750 - G 03/04/08 PRV NO. 98018 PILEJOGGER II MODELS: PJ2A 8.604-176.0 PJ2AIE 8.604-177.0 Read instructions before operating the machine. Operating Instructions (ENG).
MACHINE DATA LOG/OVERVIEW 86037500 PJ2A 03/04/08 2 For the name and address of your dealer contact: Windsor Industries YOUR DEALER Name: ____________________ __________________________ _________ _____.
TABLE OF CONTENTS 86037500 PJ2A 03/04/08 3 Machine Data Log/Overview. ........................ 2 Table of Contents .......................................... 3 HOW TO USE THIS MANUAL How to use this Manual. ................................ 1-1 SAFETY Important Safety Instructions .
HOW TO USE THIS MANUAL 86037500 PJ2A 03/04/08 1-1 This manual contains the f ollowin g sections: - HOW TO USE THIS MANUAL - SAFETY - OPERATIONS - MAINTENANCE - PARTS LIST The HOW TO USE THIS MANUAL section will tell you how to find important information for ordering correct repair parts.
86037500 PJ2A 03/04/08 2-1 IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precaution must always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE. To reduce the risk of fire, electric shock, or injury: Do not operate without filters (dry or wet ) in place.
HAZARD INTENSITY LEVEL 86037500 PJ2A 03/04/08 2-2 The following symbols are used throughout this guide as indicated in their descriptions: HAZARD INTENSITY LEVEL There are three levels of hazard in tensity identified by signal words - WARNI NG and CAUTION and FOR SAFETY.
GROUNDING INSTRUCTIONS 86037500 PJ2A 03/04/08 2- 3 THIS PRODUCT IS FOR C OMMERCIAL USE ONLY. ELECTRICAL: In the USA this machine operates on a standard 15 amp 115V, 60 hz, A.C. power circuit . The amp, hertz, and voltage are listed on the data label found on each machine.
OPERATIONS 86037500 PJ2A 03/04/08 3-1 USING PILEJOGGER II WITH EXTRACTOR 1. Connect vacuum and solution hoses to PILEJOGGER. 2. Plug power cord into properly grounded outlet. 3. Move PILEJOGGER to starting place. Turn on brush drive motor by depressing foot switch located on top of cleaning head.
MAINTENANCE 86037500 PJ2A 03/04/08 4-1 DAILY MAINTENANCE 1. Vacuum unused cleaning solution from solution tank into recovery bucket. 2. Flush two gallons of clean water th rough pumping system of extractor, PILEJOGGER and hand tools.
PILEJOGGER ASSEMBLY 86037500 PJ2A 03/04/08 5-1.
PILEJOGGER ASSEMBLY 86037500 PJ2A 03/04/08 5-2 REF PART NO. PRV NO. QTY DESCRIPTION SERIAL NO. FROM NOTES: 1 86000890 09013 2 BEARING, PJ2A SHAM BAN 2 86229780 14130 2 BLOCK, PJ BEARING MTG 3 86263880 03018 1 AXLE, PJ B RUSH 4 86273930 70051 2 SCR, 8-32 X 1/2 PPHMS NP 5 86230780 14048 1 BRUSH, PJ 6 86250410 64001 1 PULLEY, PJ2 W/ .
230V SERVICE PARTS 86037500 PJ2A 03/04/08 5-3 PART NO. PRV NO. DESCRIPTION NOTES: 86247120 53147 MOTOR ASM, 230V DC PM SERVICE ONLY 86261060 23718 CORD ASM, 1.
An important point after buying a device Windsor PJ2AIE (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Windsor PJ2AIE yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Windsor PJ2AIE - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Windsor PJ2AIE you will learn all the available features of the product, as well as information on its operation. The information that you get Windsor PJ2AIE will certainly help you make a decision on the purchase.
If you already are a holder of Windsor PJ2AIE, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Windsor PJ2AIE.
However, one of the most important roles played by the user manual is to help in solving problems with Windsor PJ2AIE. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Windsor PJ2AIE along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
