Instruction/ maintenance manual of the product UP400 White Rodgers
Go to page of 18
UP400 Programmable Thermostat Installation Instructions & User Guide Congratulations on the purchase of your White-Rodgers ™ thermostat! Save these instructions for future use! Questions? Contact White-Rodgers ™ customer service at 1-877-654-9394 For Installation Help 1- 877-654-9394 White-Rodgers.
1 1 A TTENTION: MERCUR Y NO TICE This product does not contain mercury . However , this product may replace a product that contains mercur y . Mercury and products containing mercury must not be discarded in household trash. Do not touch any spilled mercury.
2 3 P art 1 Before Getting Started 1.1 Check package contents Open the package and verify that the follo wing items are included: • Wallplate (A) thermostat (B) white cover (C) • 4 color inserts (.
4 5 C AUX G E L Y W RC R P art 2 Remove Old Thermostat and Install New Thermostat Do not disconnect wires from the old thermostat until you label all the wires according to this manual. 2.1.1 After turning off power to your heating & cooling system, expose wallplate with wires and wire terminals.
6 7 ✔ Ignore wire colors. There is no standard color code for thermostat wires. ✔ Ignore existing wire labels, if they are present. ✔ Use the pro vided labels to label/re-label the thermostat wires. ✔ The new labels must remain on the wires a t least until the installation process is complete.
8 9 If the OLD thermostat’ s terminal is wired into the wall and identifi ed by this letter… …Then label its wire with this letter: Y ou’ll need this informa tion further in the installation process! 2.2.2 Label each wire that comes out of the wall and attaches to terminals on the old thermostat.
10 11 W W2 G RH RC C L O B Y Y2 2.2.3 After labeling all the wires, use a screwdriver to disconnect each wire from its terminal. Remove the old thermostat. Make sure that the wires don’t fall into the wall after you detach them from the old thermostat.
12 13 Install 2 AA alkaline batteries (not included) into the battery compartment at the top of the thermostat. 2.6 Snap thermostat to the wallplate 2.5 Install batteries Do not restore power to the heating and cooling system until instructed. P art 3 Quick setup 3.
14 15 Options Default Setting Additional Information 1. Do you want the OFF Select default OFF for now. keypad lock (no key lockup) T o lock the keypad, see turned on or off? Additional Functions section 4.8. 2. Do you want to be ON Select default ON for now.
16 17 T o customize this schedule, continue to the ne xt page (section 4.1). 3.4 T urn on power to y our heating and cooling system. 1. Press the MENU icon and then press the SET TIME icon. 2. Using the arrows, adjust the hour then press SET . 3. Adjust the minutes, and press SET .
18 19 Y ou can change the day , time period or tempera ture settings of the pre-programmed schedule. 1. Press the SY STEM icon to set to COOL (to program the cooling schedule), or to HEA T (to program the heating schedule). 2. Press the MENU icon, then press SET SCHEDULE .
20 21 Y ou can set your three most frequent tempera tures (Home, Sleep, Away). Y ou can then select the settings an ytime with one touch of an icon. 4.2.1 T o set Home / Sleep / Away temperatures: 1. Press the MENU icon, then press SET F AVORITES . 2.
22 23 Y ou can override a preset tempera ture for up to 60 days. 1. Use the to set the desired temperature for V aca tion Hold. 2. Press the Day icon to switch to vacation hold mode. 3. Using the select the number of days for the vacation hold. 4.
24 25 The thermostat can display a reminder when it is time to change the air fi lter on your heating and cooling unit. 4.9.1 T o adjust Change Filter reminder settings: 1. Press the MENU icon, then press MORE OPTIONS twice to access the CHANGE FIL TER option.
26 27 Use this if both heating and cooling may be required in the same day . The thermostat will automatically change the system setting from heating to cooling. For example: In the morning heating is required. During the day , the temperature gets warmer and you want the air conditioner to run.
28 29 Y ou can customize the look of the thermosta t by changing the faceplate color . 1. Remove the white facepla te. Insert a small screwdriver into each of the 4 slots located on both sides of the thermostat, and pop up the white cover in all 4 spots .
30 31 P art 5 T roubleshooting Guide Problem Possible Cause Action T empera ture set 2-minute lockout No action needed: should point icon blinking enabled to protect stop blinking after compressor 2 m.
32 Appendix: Heat Pump Identifi cation 1. How do I know if I have a Hea t Pump? 2. How do I know if I should select On1 or On2 for my Heat Pump? • Check the documentation for your hea ting and cooling system or contact your HV AC contractor .
An important point after buying a device White Rodgers UP400 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought White Rodgers UP400 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data White Rodgers UP400 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, White Rodgers UP400 you will learn all the available features of the product, as well as information on its operation. The information that you get White Rodgers UP400 will certainly help you make a decision on the purchase.
If you already are a holder of White Rodgers UP400, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime White Rodgers UP400.
However, one of the most important roles played by the user manual is to help in solving problems with White Rodgers UP400. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device White Rodgers UP400 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
