Instruction/ maintenance manual of the product MP772 ST Benq
Go to page of 69
We l c o m e MP772 ST/MP776 ST MP772 ST/MP776 ST MP772 ST/MP776 ST MP772 ST/MP776 ST Digital P r ojecto r Digital P r ojecto r Digital P r ojecto r Digital P r ojecto r Us e r M a n u a l Us e r M a n.
Table of contents 2 Ta b l e o f c o n t e n t s Ta b l e o f c o n t e n t s Ta b l e o f c o n t e n t s Ta b l e o f c o n t e n t s Important safety Important safety Important safety Important safety instructions instructions instructions instructions .
Important safety instructions 3 Im por tant safet y instr uctions Im por tant safet y instr uctions Im por tant safet y instr uctions Im por tant safet y instr uctions Y our pr ojector is d esigned and test ed to meet t he latest s tandards for safety of information technol o gy equipment.
Important safety instructions 4 Safety Instru ctions (Continued) 7. The lamp be comes e xtreme ly hot durin g opera tion. Allow the projector to co o l for a ppro ximately 45 minut es prior to remov ing the lam p assembly for r eplacement. 8. Do not operate lamps beyond the rated lamp life.
Important safety instructions 5 Safety Instructions (C ontinued) 13. Do not place this pr ojector in any of the follow ing environments . - Space that is poorly ventilated o r confined. Allo w at least 50 cm clearance from walls and free flo w of air around the projector .
Important safety instructions 6 Safety Instructions (C ontinued) 17. Do not step on the projector or place any objects upon it. Bes ides probable physical damag e to the projec tor , doing so may r esult in a c ciden ts and possible inju ry . 18. Do not plac e liquids near o r on the projector .
Introdu ction 7 I ntr oduction I ntr oduction I ntr oduction I ntr oduction P roject or features P roject or features P roject or features P roject or features The projec tor i ntegra tes high-p erforman ce optical engine projec tion and a user-friendly design to deli ver high reliabil it y and e ase of use.
Introducti on 8 Shipping contents Shipping contents Shipping contents Shipping contents Carefully unpa ck and verify th at you hav e all of th e items show n below .
Introdu ction 9 Proj e c tor exte r i or v i ew Proj e c tor exte r i or v i ew Proj e c tor exte r i or v i ew Proj e c tor exte r i or v i ew 1. Lamp cov er 2. External contr ol panel (See "Controls and functions" on page 10 for deta ils.) 3.
Introducti on 10 Cont rols an d fu ncti ons Cont rols an d fu ncti ons Cont rols an d fu ncti ons Cont rols an d fu ncti ons Pro j e c t or Pro j e c t or Pro j e c t or Pro j e c t or 7.
Introdu ction 11 R emote c ont r ol R emote c ont r ol R emote c ont r ol R emote c ont r ol 1. 1. 1. 1. FREEZE FREEZE FREEZE FREEZE Freezes the projected ima ge. "Freezing the image" on p age 37 2. 2. 2. 2. ASPE CT ASPECT ASPECT ASPECT Selects t he displa y aspect ratio .
Introducti on 12 15. 15. 15 . 15. TIMER ON TIMER ON TIMER ON TIMER ON A ctivates or displa ys an on-scree n timer based on y our own timer setting. "Setting the present ation timer" on pa ge 35 16. 16. 16 . 16. TIMER SET UP TIMER SET UP TIMER SET UP TIMER SET UP Enters pres entation tim er settin g directly .
Introdu ction 13 R emo te c ont rol effec tiv e r ange R emo te c ont rol effec tiv e r ange R emo te c ont rol effec tiv e r ange R emo te c ont rol effec tiv e r ange Infra-Red (IR) r emote control sensors are locat ed on the front and the back of the projector .
Positioning you r projector 14 P ositioning y our p rojecto r P ositioning y our p rojecto r P ositioning y our p rojecto r P ositioning y our p rojecto r Choosing a location Choosing a location Choos.
Positioning you r projector 15 O btaining a pr efer r ed projected image siz e O btaining a pr efer r ed projected image siz e O btaining a pr efer r ed projected image siz e O btaining a pr efer r ed.
Positioning you r projector 16 Fo r example, if you ar e using an 120-inch screen, the rec ommended projection distance is 1481 mm and the v er tical offset is 137 mm.
Positioning you r projector 17 Pr ojection d imensions Pr ojection d imensions P r ojec tion dimensions Pr ojection d imensions Ref e r t o "D imensions" on page 62 for the center of lens dimensions of this projector before calculating the appr opriate position.
Connection 18 Co nnec tion Co nnec tion Connection Co nnec tion When c onne cting a sig nal source to the projector , be sure to: 1. T urn all equipmen t off before making an y con nections. 2. U se the corr ect signal cables for each sour ce. 3. Ensur e the cables ar e firmly ins er ted.
Connection 19 Co nnecting a comput er or monito r Co nnecting a comput er or monito r Co nnecting a comput er or monito r Co nnecting a comput er or monito r Co nnecting a c ompute r Co nnecting a c ompute r Co nnecting a c ompute r Co nnecting a c ompute r The projector can c onn ect to both IBM® c ompatibles and Macintosh® comput ers.
Connection 20 Connecting video sourc e dev ices Connecting video sourc e dev ices Connecting video sourc e dev ices Connecting video sourc e dev ices Y ou need on ly connect the project or to a video sour ce device us ing just one o f the conn ecting methods, how ever each pr ovides a differ ent level of video quality .
Connection 21 Connecting an HDMI dev ice Connecting an HDMI dev ice Connecting an HDMI dev ice Connecting an HDMI dev ice Y ou should use an HDMI cable when maki ng connection between the pr ojector and HDMI devices.
Connection 22 Connecting an S-V ideo/Composite V ideo sourc e de vice Connecting an S-V ideo/Composite V ideo sourc e de vice Connecting an S-V ideo/Composite V ideo sourc e de vice Connecting an S-V .
Operation 23 Operation Operation Operation Operation Star ting up the project or Star ting up the project or Star ting up the project or Star ting up the project or 1. Plug the po wer cor d into the pr ojector and int o a power outlet. T urn on the power outlet switch (where fi tted).
Operat ion 24 signal which is com p atible with th e projector's resolution or set the input signal to a lower setting. See " T im ing chart" on p age 63 for details.
Operation 25 Us i n g t h e m e n u s Us i n g t h e m e n u s Us i n g t h e m e n u s Us i n g t h e m e n u s The pr ojector is equipped with On-Scr een Display (OSD) menus for making various adjustments and settings. Below is the ov er vi ew of the OSD menu.
Operat ion 26 Securing the project or Securing the project or Securing the project or Securing the project or U sing a securit y cable loc k U sing a securit y cable loc k U sing a securit y cable loc k U sing a securit y cable loc k The pr ojector has to be installed in a safe plac e to pr event the ft.
Operation 27 If y ou forget the passw ord If y ou forget the passw ord If y ou forget the passw ord If y ou forget the passw ord If the passwor d function is activated, y ou will be asked to ent er the six-digit passwor d every time you turn on the projector .
Operat ion 28 Disabling the passwor d funct ion Disabling the passwor d funct ion Disabling the passwor d funct ion Disabling the passwor d funct ion T o disable passwor d protection, go back t o the .
Operation 29 S w itching input signal S w itching input signal S w itching input signal S w itching input signal The projector can be connected to multiple devices at the same time. Howeve r , it can only display one full scr een at a time. W hen star ting up , the projector auto matically search fo r the availa ble sig nals.
Operat ion 30 M ag nify ing and searching for details M ag nify ing and searching for details M ag nify ing and searching for details M ag nify ing and searching for details If y ou need to find the details on the project ed pictur e, magnify the pictur e.
Operation 31 2. Pr ess to highlight Aspect Ratio Aspect Ratio Aspect Ratio Aspect Ratio. 3. Pr ess / to select an aspect ratio to suit the format of the video signal and your display requi rements.
Operat ion 32 Optimizing the image Optimizing the image Optimizing the ima ge Optimizing the image Us i n g W a l l C o l o r Us i n g W a l l C o l o r Us i n g W a l l C o l o r Us i n g W a l l C o.
Operation 33 6. Press to select a menu item t o be changed and adjust the value with / / / /. S e e "Fine-tuning the imag e qualit y in user modes" be low f or deta ils.
Operat ion 34 Ad ju s t in g Ad ju s t in g Adj u st i n g A djus ting Brilliant Col or Brilliant Color Brilliant Color Brilliant Color This feat ure utilizes a new color -processing a lgorithm a nd system level enh ancements to enable higher brightness while pro v iding truer , more vibrant colors in picture.
Operation 35 4. P re ss to high light Hue Hue Hue Hue and press / to select i ts range. Increase in the range w ill include c olors consisted of mor e proportion s of its two adjacent colors. Please ref er to the illustration to the right for how the color s relate to each other .
Operat ion 36 4. Pr ess to highlight Timer Position Timer Position Timer Position Timer Position and set the timer position by pr essing / . 5. P re ss t o hi ghl igh t Ti mer Cou nt ing Di rec ti on Timer Counting Direction Timer Counting Direction Timer Counting Directi on and select yo ur desired c ounting direction b y pressing / .
Operation 37 Fre ez i n g t h e i m a ge Fre ez i n g t h e i m a ge Fre ez i ng t h e i m ag e Fre ez i n g t h e i m a ge Pr ess FRE EZE FREEZE FREEZE FR EE ZE on t he remo te co nt rol to fr ee ze t he image. The wor d “ FREEZE FREEZE FREEZE FREEZE” will display in the upper left corner of th e screen.
Operat ion 38 U tilizing F A Q function U tilizing F A Q function U tilizing F A Q function U tilizing F A Q function The INFORMATION INFORMATION INFORMATION INFORMATION menu contains possible solutions to pr oblems re garding image qualit y , in stallati on, special fea ture operation a nd ser vice infor mation.
Operation 39 Oper ating in a hig h altitude en v ir onment Oper ating in a hig h altitude en v ir onment Oper ating in a hig h altitude en v ir onment Oper ating in a hig h altitude en v ir onment W e.
Operat ion 40 P ersonalizing the pr ojector men u displa y P ersonalizing the pr ojector men u displa y P ersonalizing the pr ojector men u displa y P ersonalizing the pr ojector men u displa y The On- Screen Display (OSD) menus can be se t acc ording to your preferenc es.
Operation 41 If y ou are in a non-DHCP environment: If y ou are in a non-DHCP environment: If y ou are in a non-DHCP environment: If y ou are in a non-DHCP environment: 1. Repeat st eps 1-4 above. 2. Press to hig hlight DHCP DHCP DHCP DHCP and press / to select Off Off Off Off.
Operat ion 42 The tools pa ge allows y ou to manage the projector , c onfigure the Lan contro l settings and secure acc ess of remote network operation on this projector . i. Y ou can name the projector , keep tra ck of its location and th e person in charge of it.
Operation 43 Shutting down the projector Shutting down the projector Shutting down the projector Shutting down the projector 1. Press Power Power Power Power and a confirmation messa ge w ill displa y prompting you. If y ou don't respond in a few seconds, the message w ill disappear .
Operat ion 44 Me n u o p e r a t i o n Me n u o p e r a t i o n Me n u o p e r a t i o n Me n u o p e r a t i o n M enu syst em M enu syst em M enu syst em M enu syst em Please note that the on-scr een displa y (OSD) menus vary acc ording t o the signal ty pe select ed and the project or model y ou are using.
Operation 45 Main menu Sub-menu Options 4. SYSTEM SETUP: Basic Language Projector Position Front T able / Rear Table / Rear Ceiling / Front Ceilin g Menu Settings Menu Display Time 5 sec/10 sec/15 sec.
Operat ion 46 N ote th at the menu items are available when the projec tor detects at least one v alid signal. If there is no equipment con nected to the projector or no sig nal detected, limited me nu items are ac cessible. The default val ues listed in this ma nual, especially on pages 47 - 52 , are for reference only .
Operation 47 Description of each menu Description of each menu Description of each menu Description of each menu Function (Default setting/value) Description Wall Color ( Off ) Corr ects the pr ojected pictur e’ s col or when the pr ojection surfac e is not white .
Operat ion 48 Function (Default setting/value) Description Picture Mode ( Presenta tion ) Pr e-defined pictur e modes are p rovided so y ou can optimiz e your project or image set-up to suit your pr ogr am ty pe. See " Selecting a picture mode" on pag e 32 for de tails.
Operation 49 Function (default setting/value) Description Quick Aut o Search ( On ) See "S witching i nput signal" on page 29 for d etails. Color Space Conversion (depends on the selected input signal) See "Changing C olor Space" on page 29 for details.
Operat ion 50 Function (default setting / value) Descrip tion Quick Cooling ( On ) Enables or disables the Quick Cooling function. Select ing On On On On enabl es the function and projector cooling time w ill be shortened from a normal 90-seco nd duration to appro ximately 30 seconds.
Operation 51 Function (default setting / value) Description Closed Caption Closed Caption Enable Closed Caption Enable Closed Caption Enable Closed Caption Enable ( ( ( (Of f Off Off Off ) ) ) ) A ctivates the function b y selecting On On On On when th e selected input sig nal carries closed captions.
Operat ion 52 Function (default setting / value) Description FAQ-Image and Installa tion Displays possible solutions to problems you ma y encounter . FAQ- Features and Service Current System Status Source Source Source Source Shows the current signal source.
Maintenance 53 M aintenanc e M aintenanc e Maint enanc e M aintenanc e Care of the pr ojec t or Care of the pr ojec t or Care of the pr ojec t or Care of the pr ojec t or Y our pr ojector needs little maint enance. The only thing y ou need to d o on a regular basis is to keep the lens and case clean.
Maintenance 54 Lamp information Lamp information Lamp infor mation Lamp information Getting to kno w the lamp hour Getting to kno w the lamp hour Getting to kno w the lamp hour Getting to kno w the lamp hour W hen the pr ojector is in operation, the duration (in hours) of lamp usage is au tomatically calculated b y the built-in timer .
Maintenance 55 T iming of r eplacing the lamp T iming of r eplacing the lamp T iming of r eplacing the lamp T iming of r eplacing the lamp When the La mp indicator Lamp indicator Lamp indicator Lamp indicator lights up r ed or a message appears suggesting it is time to r eplace the lamp , please install a ne w lamp or consult y our dealer .
Maintenance 56 R eplacing the lamp R eplacing the lamp R eplacing the lamp R eplacing the lamp • T o reduce the risk of electrical shock, always turn the projector off and disconnect the power cord before changing the lamp. • T o reduce the risk of severe burns, allow the projector to cool for at least 45 minutes before replacing the lamp.
Maintenance 57 6. Lift the handle so that it stands up. U se the handle t o slowly pull the lamp out of the projec tor . • Pulling it too quickly may cause the lamp to break and scatter broken glass in the projector . • Do not place the lamp in locations where wat er might splash on it, children can reach it, or near flammable mater ials.
Maintenance 58 12. Connect the pow er and restart the pr ojec t or . Do not turn the power on with the lamp cover removed. R esett ing the lamp timer R esett ing the lamp timer Resetting the lamp timer R esett ing the lamp timer 13. After the star tup logo , open the On-Screen Display (OSD) menu.
Maintenance 59 Ind ic a tors Ind ic a tors In di ca tors Ind ic a tors Light St atus & De scription Power e vent s Orange Off Off Stand-b y mode. Green Flashing Off Off Po we r i n g u p.
Troubleshooting 60 T r oubleshooting T r oubleshooting T r oubleshooting T r oubleshooting The projector d oes not turn on. The projector d oes not turn on.
Specificat ions 61 Specifications Specifications Specifications Specifications P roject or sp ecifications P roject or sp ecifications P roject or sp ecifications P roject or sp ecifications All specifications are subject to change without notice. Optical Re s ol u t i on 1024 x 768 X GA Display system 1-CHIP DMD Lens F/Number F = 2.
Specifications 62 Dimensions Dimensions Dimensions Dimensions 290 mm (W ) x 94 mm (H) x 252 mm (D) Ceiling mount installat ion Ceiling mount installat ion Ceiling mount instal lation Ceiling mount installat ion 290 252 127.87 61.99 71 .15 452.65 397.40 364.
Specificat ions 63 Ti m i n g c h a r t Ti m i n g c h a r t Ti m i n g c h a r t Ti m i n g c h a r t Supported timing for PC input - MP772 ST Supported timing for PC input - MP772 ST S upp orted tim.
Specifications 64 Supported timing for PC input - MP776 ST Supported timing for PC input - MP776 ST S upp orted timing for PC input - MP776 ST Supported timing for PC input - MP776 ST Resolution Mode V ertical Frequency (Hz) Horizontal Frequency (kHz) Pixel Frequency (MHz) 720 x 400 720 x 400_70 70.
Specificat ions 65 Supported timing for HDMI (HD CP) input - MP776 ST Supported timing for HDMI (HD CP) input - MP776 ST Supported timing for HDMI (HD CP) input - MP776 ST Supported timing for HDMI (HD CP) input - MP776 ST Displaying a 1080i(1 125i)@60Hz or 1080i(1 125i)@50Hz sig nal may result in slight image vibration.
Specifications 66 Supported t iming for Component-YP Supported t iming for Component-YP Supported timing for Component-YP Supported t iming for Component-YP b b b b P P P P r r r r input - MP772 ST/ i.
Warranty and Copyright informat ion 67 W ar r ant y and Co py rig ht information W ar r ant y and Co py rig ht information W ar r ant y and Co py rig ht information W ar r ant y and Co py rig ht infor.
Regulation st atements 68 R e gulation statements R e gulation statements R e gulation statements R e gulation statements FCC statement FCC statement FCC statement FCC statement CLASS B CLASS B CLASS .
Regulation st atements 69 A cc essibilit y R equirements for R ehabilitation A c t of 1973, Section A cc essibilit y R equirements for R ehabilitation A c t of 1973, Section A cc essibilit y R equirem.
An important point after buying a device Benq MP772 ST (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Benq MP772 ST yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Benq MP772 ST - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Benq MP772 ST you will learn all the available features of the product, as well as information on its operation. The information that you get Benq MP772 ST will certainly help you make a decision on the purchase.
If you already are a holder of Benq MP772 ST, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Benq MP772 ST.
However, one of the most important roles played by the user manual is to help in solving problems with Benq MP772 ST. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Benq MP772 ST along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
