Instruction/ maintenance manual of the product 1E30(W) White Rodgers
Go to page of 8
This control is a precision instrument, and should be handled carefully. Rough handling or distorting compo- nents could cause the control to malfunction. To prevent electrical shock and/or equipment damage, disconnect electric power to system, at main fuse or circuit breaker box, until installation is complete.
2 SPECIFICA TIONS THERMAL DATA: Temperature Range: 10 ° to 32 ° C (50 ° to 90 ° F) Differential: 1.7 ° C (3 ° F) ROUTE WIRES TO LOCATION 1. If an old thermostat is being replaced and is in a satisfactory location, and the wiring appears to be in good condition, use existing wiring.
3 To prevent electrical shock and/or equipment damage, disconnect electric power to system, at main fuse or circuit breaker box, until installation is complete. This typical wiring diagram shows only terminal identifica- tion and wiring hook-up. Always refer to the wiring instruc- tions provided by the equipment manufacturer for system hook-up.
CALIBRATING THERMOSTAT This thermostat has been carefully adjusted at the factory and should not require recalibration. Due to environmental conditions, during normal operation there may be a few degrees difference between the indicator setting of the thermostat and actual room tem- perature.
1E30 1F30 R PRÉCAUTIONS Imprimé aux É.-U.A. DIVISION WHITE-RODGERS CONTROLS EMERSON ELECTRIC CO. 9797 REAVIS RD., ST. LOUIS, MO. 63123 (314) 577-1300, Télécopieur (314) 577-1517 9999 HWY.
2 SPÉCIFICA TIONS INST ALLA TION ENVIRON 5 PIEDS TROU DE 1 ⁄ 2 " POUR LE CÂBLAGE DU THERMOSTAT CORDE SOLIDE ATTACHÉE À UNE CHAÎNE DE 6" PLINTHE TROU DE GUIDAGE DE 1 ⁄ 4 " QUART-DE-ROND ENLEVÉ TROU DE 3 ⁄ 4 " DANS LE PLANCHER DE LA CLOISON FIL DE FER REPLIÉ POUR ACCROCHER LA CHAÎNE Figure 1.
3 ATTENTION Afin de prévenir les chocs électriques et les dommages matériels, coupez l’alimentation électrique au panneau de distribution électrique principal pendant l’installation. NOTE Le schéma de câblage typique illustre uniquement l’identification des bornes et le raccordement des fils.
Figure 5. Étalonnage du thermostat Manette de réglage du point de consigne Bilame ÉTALONNAGE DU THERMOSTAT Le thermostat a été réglé avec soin lors de la fabrication.
An important point after buying a device White Rodgers 1E30(W) (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought White Rodgers 1E30(W) yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data White Rodgers 1E30(W) - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, White Rodgers 1E30(W) you will learn all the available features of the product, as well as information on its operation. The information that you get White Rodgers 1E30(W) will certainly help you make a decision on the purchase.
If you already are a holder of White Rodgers 1E30(W), but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime White Rodgers 1E30(W).
However, one of the most important roles played by the user manual is to help in solving problems with White Rodgers 1E30(W). Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device White Rodgers 1E30(W) along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
