Instruction/ maintenance manual of the product 1E30(W) White Rodgers
Go to page of 8
WHITE-RODGERS FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE PERSONAL INJURY AND/OR PROPERTY DAMAGE. DESCRIPTION This low voltage thermostat is designed to provide con- venient control of the heating system.
2 SPECIFICA TIONS ELECTRICAL DATA Switch Rating: 24vAC (30vAC max.) Adjustable Heat Anticipator - 0.15 to 1.2 Amps Switch Action: SPST - Sealed mercury switch SELECT THERMOSTAT LOCATION Proper location insures that the thermostat will provide a comfortable home temperature.
3 ATTACHING THERMOSTAT 1. Remove cover from thermostat by gripping the base in one hand. Use the other hand to pull gently at the top or bottom of the cover. 2. Carefully remove the shipping protective packing from the switch. 3. Pull wires through the opening in the thermostat base and connect wires beneath the terminal screws.
CALIBRATING THERMOMETER ON THERMOSTAT COVER If thermometer reading on cover does not match thermostat: 1. Remove thermostat cover. 2. Set cover on table near an accurate thermometer. 3. Allow at least 10 minutes for thermometer to sense room temperature.
DESCRIPTION Ce thermostat à basse tension a été conçu comme commande pratique d’un système de chauffage. Dans le but de vous offrir le plus grand confort possible, le bilame sensible en spirale est couplé à un élément anticipateur réglable de chauffage.
2 SPÉCIFICA TIONS CHOIX D’UN SITE POUR LE THERMOSTAT Pour que le thermostat puisse assurer une température ambiante confortable, il doit être installé dans un site adéquat. Choisissez le site en tenant compte des recommandations suivantes : 1. Placez le thermostat environ à 1,5 m (5 pieds) du sol.
3 Figure 3. Les parties du thermostat 20 25 30 10 15 10 15 20 25 30 COUVERCLE SOCLE DU THERMOSTAT VIS DE MONTAGE SOCLE DU THERMOSTAT RÉGLAGE ET ENTRETIEN Anticipateur de chauffage (réglable) Système de chauffage THERMOSTAT SYSTÈME Neutre 120V c.a.
Clé de 7/32" pour l’étalonnage Réglage du thermomètre Figure 5. Étalonnage du thermomètre du thermostat Arrière du couvercle du thermostat ÉTALONNAGE DU THERMOMÈTRE DU COUVERCLE Si la température indiquée par le thermomètre ne correspond pas au réglage du thermostat : 1.
An important point after buying a device White Rodgers 1E30(W) (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought White Rodgers 1E30(W) yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data White Rodgers 1E30(W) - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, White Rodgers 1E30(W) you will learn all the available features of the product, as well as information on its operation. The information that you get White Rodgers 1E30(W) will certainly help you make a decision on the purchase.
If you already are a holder of White Rodgers 1E30(W), but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime White Rodgers 1E30(W).
However, one of the most important roles played by the user manual is to help in solving problems with White Rodgers 1E30(W). Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device White Rodgers 1E30(W) along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
