Instruction/ maintenance manual of the product M22 BenQ
Go to page of 326
M22 / M23 / M23G AT Command User Guide Version: 1.7.7 Date: 20/09/2006 © 2006 BenQ Inc. All rights rese rved. No part of this public ation may be reproduced , transm itted, transcribed , stored in a .
.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 i Contents 1. INTRODUC TION ----------------- --------------- -------------- -------------- --------- 2 1.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 ii Facility Lock AT+CLCK ----------------------- ----.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 iii Find phonebook entries +CPBF ----------------.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 iv Write Message to Memory +CMGW ---------------------------------- ----------------------------------- ---------------- 125 2.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 v Data compression reporting (DR) -------------------------------------- ---------------------------------- ---------------- 159 2.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 vi Request to Poll +FSP --- -------------------------.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 vii 2.5.4 GPRS attach or detac h +CGATT ---------------- ------------------- ------------------------ ---------- 220 2.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 viii 2.6.23 Convert UNICODE to GB2312 $UNI2GB -------- ----------------------------- -------------------- 266 2.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 ix 2.9.8 EXA MPLE ----------- ------------------------ ------------------------ ------------------------ --------------- 3 01 2.
.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 1 M32 / M32A / M22 / M23 AT Command User Manual Revision History Version Content Author Date 1.0 Official Release Andy T Huang 02/12/2003 1.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 2 1. Introduction 1.1 Introduction to Interf ace between TE and MS In order to communicate each other b etween TE and MS, we must use AT commands.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 3 The character defined by parameter S5 ( default, BS, IRA 8) is interpreted as request from the TE to delete the previous char acter.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 4 Example: AT+CACM?<CR>(show current accumulate.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 5 1.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 6 What is PDU mode? First a PDU is a Serv ice Center Address (SCA) followed by a Transport Protocol Data Unit (TPDU).
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 7 digits is swap, that there is an odd number of digits in the phone number and therefore, a half byte of fill dig its is required at the end (hence the hexa decimal F9).
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 8 how to handle and store the incoming SMS message.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 9 Sending SMS messages The AT command to use is AT+CMGS. Notice that this is the le ngth of the TPDU and not the PDU, so it does not includ e the SCA.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 10 Memory management Once both SM are full, then the .
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 11 2.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 12 Informativ e examples -Initial the HyperTerminal -.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 13 +CME ERROR: <err> Description Read serial number identification wh ich determined by ME manufacture r.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 14 Defined values <chset>: string type Command Possible response(s) “ GSM ” (defaul t) GSM default alphabet “ HEX ” Character strings consist only of hexadecimal numbers from 00 to FF;e.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 15 AT+CSCS= ” UCS2 ” O K AT+CPBS? +CPBS: &quo.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 16 AT+CIMI 46688010049365 2 OK Multiplexing mode +CMU.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 17 It is recommended that whenever the multiplexe.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 18 <N2> (maximum number of re-transmissions): 0.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 19 Mux mode enable command Advanced without error recovery Answer: 92/8/3 下午 05:38:37.593631 664 (+0.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 20 7E 05 EF 41 54 2D 43 6F 6D 6D 61 6E 64 20 49 6E 74 6572 70 72 65 74 65 72 20 72 65 61 64 79 0D 0A DF 7E UIH information frame to DLC 1 , it ’ s a normal information.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 21 -AT C omman d AT+WS46=? +WS46: (12) OK AT+WS46? +WS46: 12 OK 2.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 22 OK AT+CSTA=161 OK AT+CSTA? +CSTA: 161 OK AT+CSTA=1.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 23 -AT Command AT+CMOD=? +CMOD: (0-3) OK AT+CMOD?.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 24 <speed> : 1 300 bps (V.21) 2 1200 bps (V.22) 3 1200/75 bps (V.23) 4 2400 bps (V.22bis) 5 2400 bps (V.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 25 OK AT+CBST? +CBST: 7,0,1 OK Radio link protoco.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 26 AT+CRLP? +CRLP: 61,61,48,6 OK Service reporting co.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 27 +CR: (0,1) OK AT+CR? +CR: 0 OK A T + C R = 1 +.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 28 Informativ e examples -Initial the HyperTerminal -.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 29 <type> ASYNC asynchronous transparent SY.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 30 Single numbering scheme +CSNS Table: +CSNS paramet.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 31 OK AT+CSNS=8 ERROR Dial command D ATD<dial string>[I/I] [G/g] [;] When semicolon character is given after d ialing digits (or modifiers), a voice call originated to the given address.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 32 -Init ial t he MS -Initial the alpha id of first physical record in AND is “ A ” -AT Command (1) Dial number 188 ATD188; OK (2) Dial number in phoneb ook index 6.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 33 <type>: integer value 129 National 145 International Informative e xamples -Initial the HyperTermin al -Init ial t he MS -AT Command 1.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 34 OK Network registration +C REG Table: +CREG parame.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 35 4 Unk nown 5 Registered, roaming Informative e xamples -Initial the HyperTermin al -Init ial t he MS -AT Command 1.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 36 alphanumeric<oper>], numerica <ope r>)s] [,,(list of supported <mode>s), (list of supported <format>s)] +CME ERROR: <err> Description 1.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 37 <oper>:string type; numeric format is the GSM Location Area Iden tification number which consists of a three BCD digit country code c oded as in ITU-T E.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 38 Facility Lock AT+CLCK Table: +CLCK parameter comma.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 39 “ AG ” All outgoing barring ser vices “ .
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 40 +CLCK:("SC","AO","OI".
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 41 <oldpwd>, <newpwd>: string type; &.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 42 1 CLIP provisioned 2 Unknown (e.g. no network, etc.) Informative e xamples -Initial the HyperTermin al -Init ial t he MS -AT Command 1.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 43 +CLIR=? +CLIR:(list of supported <n>) Description This command allows a calling subscribe r to enable or disab le the presentation of the CLI to the called party when originating a call.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 44 AT+CL IR= 2 OK After the suppression o f CLIR, the called party will receive the calling subscribe r ’ s phone number.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 45 this response is used when normal voice call is established.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 46 Command Possible response(s) +CCUG=[<n>[, &l.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 47 Call forwarding service +CCFC Table: +CCFC par.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 48 4 Fax (facsimile services) 8 Short m essa ge servi.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 49 It doesn ’ t means that the SS service is registered successfully. You should query the status to confirm the result.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 50 Command should be abortable when network is interrogated. Defined values <N>: integer type ( sets/shows the unsolicited result code presentation status in the TA), .
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 51 1 CLI has b een withheld by the originator. 2 CLI is not available due to interworking problems or limitations of originating network.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 52 +CHLD=? [+CHLD: (list of supported <n>s) Des.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 53 -Init ial t he MS -AT Command (1) ;;;;;;MO1<.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 54 +CUSD=[<n>[, <str>[, <dcs>]]] +C.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 55 -Initial the HyperTermin al -Init ial t he MS .
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 56 reporting is made with the same command. The Read command in dicates whether the unsolicited r eporting is activated or not.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 57 <m>s) Description This command refers to supplementary service related ne twork initiated notifications.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 58 8 Call has been deflected <Index>: refer “.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 59 AT+CSSN? +CSSN: 1,1 OK at+cssn=1,1 OK atd09371.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 60 parameters, Read command returns all used entries fro m the SIM/USIM list of preferred PLMNs, previously selected by the command +CPLS, with the Access Technologies for each PLMN in the list.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 61 List current calls +CLCC Table: +CLCC paramete.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 62 0 Call is not on e of multiparty (confere nce) cal.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 63 Informative e xample -Initial the HyperTermin .
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 64 Automatic Time Zone Update +CTZU Table : +CTZU par.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 65 35 = 0x23; tmp1=0x02; tmp2=0 x03; then the value of shift is tmp2*10 + tmp1 = 32 In 3GPP TS 03.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 66 AT+CPAS +CPAS: 0 OK Set phone functionality +CFUN .
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 67 AT+CFUN=? +CFUN: (0,1,4),(0) OK AT+CFUN? +CFUN.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 68 Read command returns an alp hanumeric string indicating whether some password is required or not.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 69 +CME ERROR: SIM not inserted Battery charge +C.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 70 Command Possible response(s) +CSQ +CSQ: <rssi>,<ber> +CME ERROR:<err> +CSQ=? +CSQ: (list of supported <rssi>s), (list of supported <ber>s) Description 1.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 71 Restricted SIM access +CRSM Table: +CRSM actio.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 72 NOTE 2: The range of valid file identifiers depends on the actual SIM and is defined in GSM 51.011 [28].
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 73 Ringer sound level and ringer type select +CRS.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 74 Command Possible response(s) +CLVL = <level > +CME ERROR:<err> +CLVL? +CLVL: <level > +CLVL=? +CLVL: (list of <level >s) Description 1.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 75 Description 1. This command is used to enable and disable the uplink voice muting during a voice call.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 76 Command Possible response(s) +CACM =[<passed>.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 77 Defined values <acmmax>: string type <.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 78 +CPUC: "","" OK AT+CPUC="NT","5.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 79 OK Set Voice Mail Number +CSVM Table: +CSVM pa.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 80 145 ISDN / telephony nu mbering plan, internation al number 161 ISDN / telephony nu mbering plan, national nu mber 128 - 255 Other values refer TS 24.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 81 Informative e xample -Initial the HyperTermin al -Init ial t he MS -AT Command AT+CLAC AT+CACM AT+CAMM AT+CAOC …… OK 2.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 82 “ RC ” Last received umbers “ SM ” Abbreviated dialing numbers “ MC ” Last missed number “ ON ” Own number <used>: the used entry number s within the selected storage.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 83 +CME ERROR:<err> Description 1. Execution command returns phonebook entries in location numb er range <index1>.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 84 OK AT+CPBR=61,70 +CPBR: 61,"0920960846",.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 85 Defined values <index1>: integer type value in the range of location nu mbers of phonebook memory.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 86 memory <storage> excluding “ DC ” , “ LD ” , “ MC ” and “ RC ” .
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 87 Report Mobile Equipment error +CMEE Table: +CM.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 88 AT+CMEE? +CMEE: 1 O K 2.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 89 OK AT+FCLASS? 0 OK AT+FCLASS=2.0 OK AT+FCLASS? 2.0 OK DTMF and tone generation +VTS Table: +VTS parameter command syntax Command Return +VTS=<tone> OK ERROR if there is no communication.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 90 -Init ial t he MS -AT Command AT+VTS=? +VTS: (0,1,2,3,4,5,6,7,8,9,A,B,C,D, #,*) OK /* Setup voice call first … .
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 91 tone can be stopped by AT+WDTMF=0.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 92 Description This command is used to tune the transmit gain of microphone.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 93 2.2 Commands related to short message service SMS Text M ode & PDU Mode Parameter Definitions The following parameters are used in the sub sequent clauses which describe all commands.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 94 Message Data Parameters <alpha> string type .
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 95 23.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 96 set (refer +CSCS); type of address given by <tosca> <scts> 3GPP TS 23.040 TP-Service-Centre-Time- Stamp in time-string format (refer <d t>) <sn> 3 GPP TS 23.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 97 2.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 98 2.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 99 1.Set All ME & Show Message list AT+CPMS= "ME","ME","ME" +CPMS: 0,0,0,0,0,0 OK AT+CPMS? +CPMS: "ME",0,0,"ME",0,0,"ME",0,0 OK 2.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 100 and unsolicited r esult codes resulting from received messages.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 101 Description Set command updates the SMSC address, through which mobile originated SMs are transmitted.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 102 Defined values <fo>: integer type Bit 7 Bit.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 103 Show Text Mode Parameters +CSDH Table: +CSDH .
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 104 AT+CSDH=? +CSDH: (0,1) OK Select Cell Broadcast M.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 105 AT+CSCB? +CBCB: 0, ” 1,4,10 ” , ” 2,3 ” OK 2.set message types Note: the number of <mids> and <dcss> depe nds on services scope of the service provider.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 106 Description Execution command saves active message service settings to a non- volatile memory. A TA can contain several profiles of settings.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 107 be supported by the stor age (e.g. (U)SIM SMS parameters) a nd therefore can not be restored . Defined values <profile> : 0-1 profile number wher e settings are to be restored.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 108 <mode> controls the processing of unsolicit.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 109 +CMT: <oa>, <alpha>],<scts>.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 110 1 TA buffer of unsolicited result codes defined within this command is cleared when <mode> 1..
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 111 List Messages +CMGL Table: +CMGL Action Comma.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 112 Informative e xamples -Initial the HyperTermin al -Init ial t he MS -AT Command 1.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 113 successful and SMS-SUBMIT: +CMGR: <stat>.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 114 +CMGR: 2,,35 079188968343482 251BA02812500008 F1D0A0A030606010A030C040208 93D567BA421 D26ABE98A7B 5B1D 06 OK 2.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 115 acknowledgement for each result code. In this way, ME/TA can determin e if message should be placed in non- volatile memory and routing to TE disabled(+CNMA not received).
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 116 - if <dcs> (set with +CSMP) in dicates that 3GPP TS 23.038 defau lt alphabet is used and <fo> indicates that 3GPP TS 23.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 117 Send Message from Storage +CMSS Table: +CMSS .
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 118 Write Message t o Memory +CMGW Table: +CMGW Actio.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 119 Delete Message +CMGD Table: +CMGD Action Comm.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 120 -AT Command AT+CM GF =1 AT+CMGS="0921214863&.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 121 Defined values <stat> integer type in P.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 122 079188968343482 2110000800004 A801E4 OK Read Mess.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 123 079188968343482 251B70281220000 8F1E040D02180.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 124 (i.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 125 Informative Exampl es -Initial the HyperTermi.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 126 through this mechanism, if desired. Responses to the repeated command line shall be issued using the par ity and format of the original command line, and the rate of the "A/".
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 127 -Initial the HyperTermin al -Init ial t he MS.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 128 OK AT&F0 OK AT&F1 ERROR AT&F2 EXT: I .
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 129 ATI <manufacturer1> OK 2. ATI0 <manufacturer1> OK 3. ATI1 <manufacturer2> OK 4.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 130 -Init ial t he MS -AT Command AT+GMI=? OK AT+GMI?.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 131 OK Request revision identification (+GMR) Tab.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 132 determined by the manufacturer , which is intended to permit the user of the DCE to identify the individual device.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 133 Table V.25ter-Examples of required +GCAP responses +GCAP response DCE control standard Description +FCLASS T.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 134 OK Command line termination character (S3) Table:.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 135 Response formatting character (S4) Table: Syn.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 136 (see 5.2.2). Defined values 0 to 127 Set command line editing char acter to this value. Recommended default setting 8 Backspace character (BS, IA5 0/8).
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 137 Information examples -Initial the HyperTermin.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 138 Information examples -Initial the HyperTermin al .
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 139 Informat ion responses <text><cr>.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 140 Result code selection and call progress monitorin.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 141 3.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 142 Information examples -Initial the HyperTermin al .
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 143 &D: 0 OK AT&D1 OK AT&D? &D: 1.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 144 Defined values The rate value specified shall be the r ate in bits per second at which the DTE-DCE interface should opera te, e.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 145 + ICF:(list of supported < form at > va.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 146 -Initial the HyperTermin al -Init ial t he MS -AT.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 147 control.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 148 -AT Command AT+IFC=? +IFC: (0-2),(0-2) OK AT+IFC?.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 149 Defined values See Table 7.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 150 Description This command instructs the DCE to origin ate a call.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 151 Alphabetic (ATV 1) Numeric (ATV 0) Descrip tion CONNECT 1 If connection is successfully established and X0 is selected.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 152 Information examples -Initial the HyperTermin al .
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 153 Τ Description Causes subsequent dial digits to be signalle d using DTMF. The effect of the T modifier may carry forwa rd to subsequent D commands (i.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 154 Answer (A) Table: Syntax (A) Command Possible res.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 155 Table 9/V.25 ter – A command result codes Alphabetic (ATV1) Numeric (ATV0) Description CONNECT 1 If connection is successfully established and X0 is selected.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 156 ERROR If < value > is not recog nized or supported.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 157 000 OK ATS0=1 OK ATS0? 001 OK Monitor speaker.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 158 OK ATL2 OK ATL3 OK 2.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 159 – max_str ing , which specifies the maximum string length to be neg otiated (V.42 bis P2).
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 160 + DR? Read syntax + DR: < current setting >.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 161 Information examples -Initial the HyperTermin.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 162 2.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 163 -Init ial t he MS -AT Command AT+FDT +FCS:0,3.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 164 After a Page Status report, the DCE shall report the po st page message from the remote facsimile station via the FET:<ppm> response (8.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 165 Initialize facsimile parameters +FIP Command .
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 166 Description The FCO response indicates connection with a Group 3 facsimile station.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 167 02: R8 x 15.4 l/mm 0 4: R16 x 15.4 l/mm 0 8: 200dpi x 100 l/25.4 mm 1 0: 200dpi x 200 l/25.4 mm 2 0: 200dpi x 400 l/25.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 168 <JP>: JPEG for colour and B&W 00: Disable JPEG coding Note s 1.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 169 Response Possible command(s) +FTC: <VR>.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 170 +FDT +FDR Description FPO indicates that the remote station ha s a document to poll and invites the DTE to poll it (see Table 2/T.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 171 Defin ed v a lues Informative exa mples ATA +.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 172 Description The response reports the received remo te called station ID string, if an y.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 173 Informative exa mples Report NSF Frames +FNF .
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 174 Description The response rep orts any received Non-Standard Setup frame s, one response per frame.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 175 The result would be: <CR><LF>FPW:.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 176 Defin ed v a lues Informative exa mples Report T.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 177 1: Page good (T.30 label: MCF; Result code: OK) 2: Page bad; r etrain requested ( T.30 label: RTN; Result code: ERROR) 3: Page good; retrain requested (T.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 178 mnemonic: PRI-MPS) 4 : Another document next (T.30 mnemonic: PRI-EOM) 5: No more pages or documents, procedure interrupt requested ( T.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 179 +FDT +FDR +FKS +FIP Description FHS indicates that the call has b een terminated. The hangup cause is repo rted, and stored in the FHS parame ter for later inspection.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 180 Defin ed v a lues <hsc>: Hangup status code.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 181 52 53 54 55 56 57 58 No response to MPS repea.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 182 This reports the HDLC data that was sent by the DCE. The DCE may be commanded to report the T .30 Phase B and Phase D HDLC control frames as they are sent and received.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 183 set, and DTE commands shall not be echoed. The data shall be re ported with each T.30 command separated by <CR><LF>.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 184 -Init ial t he MS -AT Command AT+FCLASS=? 0,2.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 185 DCE, from the choices defined in Table 2/T.30. When +FCC is modified by the DTE, the DCE shall copy +FCC into +FIS.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 186 -Init ial t he MS -AT Command AT+FIS=1,1,0,0,0,0,.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 187 +FLI=? +FLI: (list of supported characters) Description The DCE shall send the correspon ding ID frame if FLI is not a null string.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 188 Description The DCE shall send the corresponding ID frame if FPI is not a null string. +FPI is used for CIG.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 189 octet must be the country code (see Recommendation T.35). This parameter may require 180 hexadecimal characters to specify.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 190 Request to Poll +FSP Command Possible response(s).
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 191 <value> 0: Indicates the DCE will not receive message data; also, the DCE will not be able to poll a re mote device.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 192 Negotiation Reporting +FNR Command Possible respo.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 193 -Initial the HyperTermin al -Init ial t he MS.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 194 The DCE shall send the numeric string contained in +FSA at the times specified in Recommendation T.30 , if the correspo nding parameter is not a null string.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 195 If less than 20 char acters are spe cified in a non-null string , the DCE shall append space characters (2/0).
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 196 Procedure Interrupt Enable +FIE Command Possible .
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 197 +FPS? +FPS: <ppr> +FPS=? +FPS: (list of.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 198 Copy Quality Checking +FCQ Command Possible respo.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 199 quality OK (MCF) responses to complete pages and set +FPS=1 <tq>: Copy Quality Checking of data sent to remote station 0: DCE transmit copy qu ality checking is disabled.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 200 ERROR +FAA? +FAA: <value> +FAA=? +FAA: (list of supported <value>s) Description The command indicates the capab ility of switching of service class.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 201 Call Termination Status +FHS Command Possible response(s) +FHS? +FHS: <hsc> Description This read only para meter indicates the cause of a hangup.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 202 parameter, and send the partial pa ge at the new lower signaling rate.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 203 define d in 8.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 204 Minimum Phase C Speed +FMS Command Possible respo.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 205 <tbs>: transmit buffer size <rbs>.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 206 ‧ Reversed – The last bit transferred of each octet on the DTE-DCE link is t he first bit transferred on the GSTN data carrier.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 207 data streams. It does no t apply to T.6 data, or to any other form of data (e.g. T.434 BFT). Defin ed v a lues <value>: 0: Determines that T.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 208 <dfc>: 0: Data format format codes ignored .
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 209 Informativ e examples Revision ID +FMR Command Possible response(s) +FMR? <revision> +CME ERROR: <err> Description Read revision of ME.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 210 <value>: DTE-DCE f low control 0: Turn off .
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 211 OK ATE0V1&D2S0=0S8=2 OK AT+FNR=1,1,1,0;+F.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 212 OK AT+FLI= ” Local ID ” //Local ID is the fax.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 213 2.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 214 be in a defined state at the same time is given by the range returned by the test command.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 215 0 - off (default if value is omitted) 1 - on Other values are reserved.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 216 +CGQREQ=[ <cid> [,<precedence > [,<delay> [,<reliab ility.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 217 context number <cid> to become undefined. The read command returns the current settings for each defined context.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 218 +CGQMIN=[ <cid> [,<precedence > [,<delay> [,<reliab ility.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 219 of which may be set to a separate value. A special form of the set command, +CGQ MIN= <cid> causes the minimum acceptable profile for context number <cid> to be come undefined.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 220 OK AT+CGQMIN? +CGQMIN: 1,0,1,1,1,1 OK 2.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 221 0 - detached 1 - attached Other values are reserved and will result in an ERROR response to the execu tion command.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 222 context is already in the requested state, the state for that context remains unchanged.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 223 Informative e xamples -Initial the HyperTermin al -Init ial t he MS -AT Command 1.Query +CGACT Support AT+CGACT =? +CGACT : (0,1 ) OK 2.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 224 The detailed behavior after the online da ta state has been entered is dependent on the PDP type. It is described briefly in 3GPP TS 27.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 225 completed successfully, the V.25ter command state is re-entered a nd the MT returns the final result code OK.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 226 +CGPADDR=[<ci d> [,<cid> [,…]]] +CGPADDR: <cid>,<PDP_addr>[ <CR><LF>+CGPA DDR: <cid>,<PDP_addr> [.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 227 AT+CGPADDR =2 +CGPADDR: 2 OK AT+CGPADDR =1 +CGPADDR: 1 OK 2.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 228 to the TE, this is followed by the intermediate result code CONNECT.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 229 AT+CGAUTO? +CGAUTO: 1 OK AT+CGAUTO =2 OK AT+CGAUTO? +CGAUTO: 2 OK 2.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 230 procedures shall take place prior to or du ring the PDP startup. One or more <cid>s may be specified in order to p rovide the values needed fo r the context activation request.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 231 command the MT to acknowledge the network request but rather to ma ke a new request for context activation.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 232 Description The set command is used to set the MT to operate accor ding to the specified GPRS mobile class.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 233 OK AT+CGCLASS? +CGCLASS: "CG" OK 2.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 234 <mode> 1 or 2 is entered 1 MT buffer of uns.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 235 AT+CGEREP=? +CGEREP: (0-2),(0,1) OK 2. Set +C GEREP AT+CGEREP=1,0 OK AT+CGEREP? +CGEREP: 1,0 OK AT+CGEREP=1,1 OK AT+CGEREP? +CGEREP: 1,1 OK 2.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 236 The read comma nd returns the status o f result code presentation and an integer <stat> which shows whether the network has currently indicated the registratio n of the MT.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 237 -Initial the HyperTermin al -Init ial t he MS -AT Command 1.Query +CGREG Support AT+CGREG=? +CGR EG: (0 -2) OK 2.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 238 Defined Values <service>: a numeric paramet.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 239 D*<GPRS_SC>[*[<c alled_address> ].
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 240 <GPRS_SC>: (GPRS Service Code) a digit stri.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 241 specified. NOTE: T h e ‘ S0=n ’ (n=0) command does not perfor m an automa tic GPRS detach. Informative e xamples -Initial the HyperTermin al -Init ial t he MS -AT Command 1.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 242 2.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 243 2.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 244 Listing the parameters and defining the values &l.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 245 $AUPATH= <path>, <mode> $AUPATH: .
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 246 OK /* open auxiliary path an d loop, not in call */ AT$AUPATH=1,1 $AUPATH: 1 OK /* open auxiliary path an d speech in call */ AT$AUPATH=2,1 $AUPATH: 1 OK 2.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 247 Listing the parameters and defining the values Path 0: Sidetone 1: Mic 2: Speaker Gain: 1-9 1: Minimum gain 9: Maximum gain AT$AUGAIN=0,0 w ill turn off side tone.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 248 Description This command is used to control microphone mute. Note that this comman d has to be used after audio path is configured by AT$AUP ATH.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 249 $AUVOL? $AUVOL: (list of curre nt <volume>) OK Description This command is used to control speaker vo lume.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 250 Description This command is used to configure the echo canceller (AEC).
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 251 Informative e xamples -Initial the HyperTermi.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 252 <Value 0>, <Value 1>, … <Value 30>: 0 - 65535 The FIR coefficient value .
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 253 Defined values Listing the parameters and defin ing the values <Value 0>, <Value 1>, … <Value 30>: 0 - 65535 The FIR coefficient value .
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 254 related to the current estima ted energy. Note that this command ha s to be used after audio path is configured by AT$AUPATH.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 255 algorithm finds the right VAD and ABS parameter in o rder to compensate effect of the FIR on the DL (downlink) signal.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 256 coefficient is a Boolean value that can en able the continuous mode filtering. Note that this command has to be used after audio path is configured by AT$AUPATH.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 257 Note that this command has to be used after audio path is configured by AT$AUPATH.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 258 far_end_noise.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 259 coefficient is the maximum number of attenuation level. Note tha t this command has to be used after audio path is configured by AT$AUPATH .
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 260 Defined values Listing the parameters and defin ing the values <FIL Value>: 0 - 6 5535 The FIL coefficient value.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 261 Defined values Listing the parameters and defin ing the values <MUT Value>: 0 - 6 5535 The MUT coeffici ent value.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 262 <Value>: 0,1 The extra gain valu e.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 263 <Value>: 0, 1 The output bias value.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 264 -Initial the HyperTerminal -Init ial t he MS -AT Command 1. Query the current command status AT$SRN=? $SRN: 1 OK 2.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 265 Description This command is used to set the mode of I/O 12 to VCD mode.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 266 2.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 267 GB2312: GB2312 String Informative e xamples -Initial the HyperTerminal -Init ial t he MS -AT Command AT$GB2UNI= ” A4A4 ” <CR> ( 中 ’ s GB2312) 3044 ( 中 ’ s UNICODE) OK 2.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 268 14.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 269 -Initial the HyperTerminal -Initial the MS -AT Command AT$HRST=1 OK 2.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 270 OK $LVD? $LVD: <Voltage>,<Duration> O.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 271 OK 2.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 272 OK.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 273 2.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 274 <cId>: integer type; call identifica tion numbe r as described in GSM 02.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 275 network.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 276 (3) Accept an incoming call AT%C PI=1 RING %CPI: .
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 277 %CPI: 1,6,1,1,0,0,,"0921214863",129.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 278 %CPI: 2,1,0,1 (MT-0921214863 hang up) NO CARRIER ATH (hang up) OK 2.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 279 Command Possible response(s) %CGAATT=<atta.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 280 Description This command is used to perfor m software test on flash memory. And the input must be set as 0.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 281 AT$CLSL=0 OK 2.7.6 Play T one on Speaker $CSSL Table: $CSSL parameter command syntax Command Possible response(s) $CSSL=<isEnable>[,<ga in>,<fr eq>,<duration >] OK, ERROR.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 282 2.7.7 Get PIN1, PIN2, PUK1, PUK2 remaining number % PVRF Table: %PVRF parameter command syntax Command Possible response(s) %PVRF <remaining number>, Error.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 283 Command Return $DAT E= < YY,MM ,DD> $DATE? $DATE: <Year>,<Month>,<Day> $DATE=? $DATE: YY/MM/DD Description This command is used to set the date in RTC.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 284 This command is u sed to set the time in RTC. It uses the 24-Hour format. Defined values < HH> : The hour field.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 285 <dark_duration> Duration of green led t.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 286 OK AT$SIMTEST $SIMTEST: 0 /* No SIM card is detec.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 287 2.8 M2M: Machine to Machine M2M(Machine-to-Machine ) is a new feature in BenQ GPRS module. Device can connect to a TCP/UDP server on Internet over GPRS.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 288 Command Possible Response(s) $TIMEOUT=[<timeout>] OK ERROR Description This command set the timeout for M2M (machine to machine).
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 289 <port>: TCP/UDP port number, 1-65535 <dns_mode>: Enable/Disable DNS service 0: Disable 1: Enable Other values are reserve d and will result in an ERROR response to the set command.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 290 return “ NO CARRIER ” when GPRS / TCP connecti on has been terminated. Via IO 10 pin, the module will be notified if there is a SMS or an incoming call.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 291 2.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 292 <satPrfl>: string type; SIM application toolk it profile (hexadecimal format; refer +CSCS) starting with first byte of the profile.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 293 If %SATM = 0 % SATE=<satCmd> If %SATM =.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 294 2.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 295 0: Session terminated by user 1: Response giv.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 296 Sending a Terminal Response to th e SIM 2.9.5 SA T command notify % SA TN This command notifies the information (setup call, send ss….
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 297 CmdType=2 (Send SS) <TextInfo> First by.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 298 command. <Help info>[,<NextAction>] %SATI: <CmdType>,<Id2>, <counts>,<Alpha id2 name>, <Help info>[,<NextAction>] … .
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 299 <Format> 0: SMS alphabet default 1 : U .
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 300 1: Help information available <NextAction> .
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 301 <TextInfo> First byte is data coding sc.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 302 %SATI: 0,804E2D83EF96FB4FE15340 %SATI: 0,193,2,0,.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 303 %SATI: 1,1,0,1,1,100,0,8F38516582F16587 <=.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 304 2.10 ME Lock ME Mock is only support in some model. Please check the release note for the status. 2.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 305 <trans-mode>,<data-len> , <pas.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 306 Code Descri ption 0 Succe ssful -1 Password Mi sm.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 307 2.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 308 21 Invalid index 22 Not found 23 Memory failure 2.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 309 111 PLMN not allowed 112 Location not allowed.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 310 47 Resources unavaila ble, unspecified 50 Request.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 311 302 Operation not allowed 303 Operation not s.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 312 2 Data corrupted 3 Internal error 4 Call table fu.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 – 20/09/2006 313 30 response to status enquiry 31 normal, unsp.
© 2 0 0 6 B e n Q C o r p o r a t i o n . C o n f i d e n t i a l P r o p e r t y A T C o m m a n d U s e r M a n u a l Version: 1.7.7 20/09/2006 314 211 operation failed 212 timeout 213 bearer servi.
An important point after buying a device BenQ M22 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought BenQ M22 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data BenQ M22 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, BenQ M22 you will learn all the available features of the product, as well as information on its operation. The information that you get BenQ M22 will certainly help you make a decision on the purchase.
If you already are a holder of BenQ M22, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime BenQ M22.
However, one of the most important roles played by the user manual is to help in solving problems with BenQ M22. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device BenQ M22 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
