Instruction/ maintenance manual of the product BDW 53 BENDIX
Go to page of 28
Dishwasher BDW 53 INSTRUCTION BOOK.
2 Description of the appliance 1. W ater hardness adjustment 2. Levelling spacers 3. Upper basket stop 4. Salt container 5. Large filter 6. Detergent dispenser 7. Control panel 8. Rating plate 9. Rinse aid dispenser 10. Central filter 1 1. Lower spray arm 12.
3 The control panel 1. MAINS ON indicator light 2. On/Off push button 3. Programme guide 4. Door handle 5. Programme marker 6. Programme selector dial 7. Programme sequence indicator As the programme progresses, the programme selector dial turns, to show the phase in the wash programme the appliance has reached.
4 W ashing programmes Programme Degree of soil and type of load Require push button Starting position of the programme selector Recommended quantity of detergent wash prewash Heavy soil. Crockery , cutlery , pots and pans. Normal soil Crockery and cutlery Any .
5 1. Check the filters Ensure they are clean and properly positioned S ee "Maintenance and cleaning" section. 2. Check that there is rinse aid and salt See "Before Use" section. 3. Load the dishes Remove any scraps of food. Pull the lower basket out and arrange the saucepans, plates and cutlery in it.
6 Loading your appliance Before placing dishes in the machine, remove any scraps of food, to avoid clogging the filters and consequently reducing the performance. Do not load very small items which can fall through the baskets. The lower basket The lower basket is designed to take saucepans, lids, plates, salad bowls, cutlery etc.
7 The upper basket The upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 25 cm in diameter), salad bowls, cups and glasses. Arrange items so that water can reach all surfaces. Light items (plastic bowls etc.) should be loaded in the upper basket and arranged so they do not move.
8 Fitting under a counter (kitchen worktop or sink) By removing the machine’s worktop, you can install it under a close fitting sink unit or a pre-existing top, providing the dimensions of the recess correspond to those shown in the picture.
9 Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse aid dispenser Hints for test centres T est standard: EN 50242 Reference programm.
Bendix, 55-77 High Street, Slough, Berkshir e, SL1 1DZ Customer care telephone number ... 08705 950 950 From the Electrolux Group. The world’ s No.1 choice. The Electrolux Group is the world’ s largest producer of powered appliances for kitchen, cleaning and outdoor use.
Instruction Boo k - Before use - Maintenance - Installation 1 Contents Important safety information 2 Before use 3 Setting the water softener 3 Filling with salt 4 Filling with rinse aid and adjusting.
Installation ● This appliance is heavy . Care should be taken when moving it. ● It is dangerous to alter the specifications or attempt to modify this product in any way . ● Care must be taken to ensure that the appliance does not stand on the electrical supply cable.
3 Before use Before using your dishwasher for the first time: 1. Ensure that the electrical and water connections comply with the installation instructions 2. Remove all packaging from inside the appliance 3. Set the water softener 4. Pour 1 litre of water inside the salt container and then fill with salt 5.
4 Filling with salt Attention! Only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in dishwasher , especially table salt, will damage the water softener . Only fill with salt just before starting a washing programme.
5 Rinse aid Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying. The dispenser , which is positioned inside the door , holds about 1 10 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting.
6 Use of detergent Only use detergents specifically designed for use in dishwashers. We recommend the use of Finish detergents which are available in the following options: Finish Double Action T ablets. Each tablet has the exact amount of detergent required, simply place in the dispenser .
7 T o save energy Place dishes in the machine immediately after every meal and wait until the dishwasher is full before washing. If necessary run the Rinse and Hold programme (see "W ashing Programmes" chart) so that any food scraps do not become caked on the dishes while you are waiting to run the complete wash programme.
8 Internal cleaning Ensure that the seals around the door , the detergent and rinse aid dispensers are cleaned regularly with a damp cloth. We recommend the use of Finish Dishwasher Cleaner every 3 months or run a 65°C wash without dishes using detergent.
9 Something not working Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer .
min 30 cm max 100 cm min 4 cm Ø 21 Ø 18 CS09 2 3 1 max 100 cm 10 Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person.
11 The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher . The drain hose can face either to the right or left of the dishwasher Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water .
Service and spare par ts In the e v ent of y our appliance requi r ing se r vic e , or if y ou wish to purchase spare pa r ts please contact y our local Bendix Service Centre by telephoning: 08705 929 929 Y our telephone call will be automatically routed to the Ser vice F orce centre covering y our post code area.
To contact your local Service Force Centre telephone 08705 929 929 CHANNEL ISLANDS GUERNSEY Guernsey Electricity PO Box 4 Vale, Guernsey Channel Islands GY1 3AD JERSEY Jersey Electricity Company Haut .
To contact your local Service Centre telephone 08705 929 929 MIDLANDS BIRMINGHAM 66 Birch Road East Wyrley Trading Estate Witton Birmingham B6 7DB BOURNE Pinfold Road Bourne PE10 9HT BRIDGNORTH 68 St.
Service and spare par ts In the e vent of your appliance requiring service, or if you wish to purchase spare parts please contact your local T r icity Bendix Service Centre by telephoning: 08705 929 929 Y our telephone call will be automatically routed to the Ser vice F orce centre covering y our post code area.
.
.
2 07/01.
An important point after buying a device BENDIX BDW 53 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought BENDIX BDW 53 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data BENDIX BDW 53 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, BENDIX BDW 53 you will learn all the available features of the product, as well as information on its operation. The information that you get BENDIX BDW 53 will certainly help you make a decision on the purchase.
If you already are a holder of BENDIX BDW 53, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime BENDIX BDW 53.
However, one of the most important roles played by the user manual is to help in solving problems with BENDIX BDW 53. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device BENDIX BDW 53 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
