Instruction/ maintenance manual of the product BE817 Belling
Go to page of 30
BE817 Frost Free Fridge Freezer INST ALLA TION AND USER INSTRUCTIONS Y ou must read these instructions prior to using the appliance and retain them for future reference.
1 Contents Introduction & safety warnings ...........................................................................2 Electrical requirements ......................................................................................3 T ransportation instructions .
2 Congratulations on your choice of a Belling quality Appliance which has been designed to give you service for many years. W ARNING ! IMPORT ANT ! DO NOT connect your appliance to the electricity supply until all packing and transit protectors have been removed.
3 ELECTRICAL REQUIREMENTS Before you insert the plug into the wall socket make sure that the voltage and the frequency shown in the rating plate inside the appliance corresponds to your electricity supply . Rating label is on the left hand side of freezer inner liner .
TRANSPORT A TION INSTRUCTIONS 1. The appliance should be transported only in a vertical upright position. The packing as supplied must be intact during transportation. 2. If during the course of transport the appliance has to be transported horizontally , it must only be laid on its left hand side when standing in the front of the appliance.
5 4. Do not place the appliance near cookers, radiators or in direct sunlight as this will cause your appliance to work harder . If installed next to a source of heat or freezer , maintain the followi.
6 Getting to know your appliance WINE RACK DEFROST W A TER COLLECTION CHANNEL EGG TRA Y SALAD CRISPER CABINET SHEL VES THERMOST A T KNOB INTERIOR LIGHT BOTTLE SHELF FROZEN FOOD COMP ARTMENTS F AST FRE.
Arrangement Examples (See diagram) 1. Baked, chilled cooked food, dairy products, cans. 2. Wine, 3. Meat, sausages, cold cuts. 4. Fruit, vegetables, salads. 5. Frozen food and freezing of fresh food. 6. Frozen food. 7. Butter , cheese. 8. Small bottles, cans, tubes.
TEMPERA TURE CONTROL AND ADJUSTMENT Operating temperatures are controlled by the thermostat knob (see diagram) located on the ceiling of fridge compartment.
STORING FROZEN FOOD Prepacked commercially frozen food should be stored in accordance with the frozen food manufacturer's instructions for a frozen food storage compartment. T o ensure that the high quality achieved by the frozen food manufacturer and the food retailer is maintained, the following should be remembered: 1.
MAKING ICE CUBES Fill the ice - cube tray 3/4 full with water . Loosen frozen trays with the handle of a spoon, never use sharp edged objects such as knives, forks. Note: If freshly made ice cubes are not consumed for several weeks, they will slowly reduce in size and eventually disappear completely .
DEFROSTING A) FRIDGE COMP ARTMENT The fridge compartment defrosts automatically . The defrosting water runs to the drain tube via a collection container at the back of the appliance (1). (see diagram) During defrosting water droplets may form at the back of the fridge compartment where concealed evaporator is located.
12 CLEANING AND CARE ** We recommend that you switch of f the appliance at the socket outlet and pull out the mains plug before cleaning. ** Never use any sharp abrasive instrument, soap, household cleaner , detergent and wax polish for cleaning. ** Use luke warm water to clean the cabinet of the appliance and wipe it dry .
REPLACING THE INTERIOR LIGHT BULB (See diagram) Should the light fail to work, proceed as follows. 1. Switch off at the socket outlet and pull out the mains plug.
DO'S AND DON'TS Do- Clean and defrost your appliance regularly (See "Defrosting") Do- Keep raw meat and poultry below cooked food and dairy products. Do- T ake of f any unusable leaves on vegetables and wipe off any soil. Do- Leave lettuce, cabbage, parsley and cauliflower on the stem.
15 ENERGY SA VING TIPS 1- Ensure your appliance is installed in a well ventilated area. If the ambient temperature is low (but in no case lower than 5 degrees C), then the energy saving will be more.
16 REVERSING THE DOORS T op Door 1. Unscrew top hinge (4). 2. Carefully remove the top door . 3. Unscrew lower hinge (6) 4. Remove plastic plugs (10 &1 1). 5. Refit top hinge (4) as lower hinge (14) on the left hand side. 6. Replace top door 7. Refit lower hinge (6) as top hinge (16) on the left hand side.
17 REVERSING THE DOORS 1 2 3 4 5 10 6 7 8 9 13 1 1 12 16 17 15 18 22 14 21 20 23 19.
18 INST ALLA TION INSTRUCTIONS (All dimensions are in mm) 1 3 3 2 2 45 ° FRONT FEET 45 °.
19 4 5 REAR FEET 45 °.
20 min. 550 min. 35 mm min. 200 cm 2 min. 5 60 1812 848 28 1812 758 848 86.5 91 535 540 min. 200 cm 2 100 100 60 60.
21 86.5 91 200 cm 2 200 cm 2 min.35 mm 758 848.
22 90 o 9 10 8 1 1 6 7 6.
23 15 14 16 17 14 90 o 18 mm + 1 _ 15 18 12 13 1 mm.
24 Ensure 2 mm gaps are obtained, adjust if necessary . 2 mm 2 mm 2 mm.
25 GUARANTEE DET AILS Y our new Belling product is guaranteed against the cost of breakdown repairs for twelve months from the date of the original purchase. What is covered? • Repairs necessary as a result of faulty materials, defective components or manufacturing defect.
26 Recycling This product bears the selective sorting symbol for waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European Directive 2002/96/EC in order to be recycled or dismantled to minimize its impact on the environment.
PERFORMANCE Energy efficiency class Energy consumption - Kwh/year Net storage - vol fresh food ltrs (cu.ft.) T otal net vol - ltrs (cu.ft.) Frozen food compartment rating Conservation time from failure Freezing capacity fresh food - kg (lb) / 24 hrs. Climate class Operating noise level dB(A) Net storage - vol frozen food ltrs (cu.
28 WIRING DIAGRAM.
48 61 19 00 00 In case of dif ficulty within the UK, please call Belling Customer Care Centre Helpline on 08 44 815 3746 When you dial this number you will hear a recorde d message and be given a number of options. This indicates that your call has been accepte d and is being held in a queue.
An important point after buying a device Belling BE817 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Belling BE817 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Belling BE817 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Belling BE817 you will learn all the available features of the product, as well as information on its operation. The information that you get Belling BE817 will certainly help you make a decision on the purchase.
If you already are a holder of Belling BE817, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Belling BE817.
However, one of the most important roles played by the user manual is to help in solving problems with Belling BE817. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Belling BE817 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
