Instruction/ maintenance manual of the product BE814 Belling
Go to page of 28
BE814 Fully Integrated Freezer INST ALLA TION AND USER INSTRUCTIONS Y ou must read these instructions prior to using the appliance and retain them for future reference.
.
Contents Introduction & safety warnings ...........................................................................2 Electrical requirements ......................................................................................3 T ransportation instructions .
Congratulations on your choice of a Belling quality Appliance which has been designed to give you service for many years. W ARNING ! IMPORT ANT ! DO NOT connect your appliance to the electricity supply until all packing and transit protectors have been removed.
3 ELECTRICAL REQUIREMENTS Before you insert the plug into the wall socket make sure that the voltage and the frequency shown in the rating plate inside the appliance corresponds to your electricity supply . Rating label is on the left hand side of freezer inner liner .
TRANSPORT A TION INSTRUCTIONS 1. The appliance should be transported only in a vertical upright position. The packing as supplied must be intact during transportation. 2. If during the course of transport the appliance has to be transported horizontally , it must only be laid on its left hand side when standing in the front of the appliance.
1. T o avoid a hazard due to instability of the appliance, it must be fixed in accordance with the instructions. 2. Do not operate this appliance unless installed to furniture. 3. The appliance should be located on a smooth surface. The four front and back feet can be adjusted as required.
6 REPOSITIONING THE DOOR Follow the step by step instructions and the diagram below . Numbers in brackets refer to diagrams. 1 2 1 2 4 3 8 7 5 6 8 7.
7 1. Switch off at the socket outlet and pull out the mains plug. 2. Remove all food, loose items and fittings from inside the appliance and door shelves. 3. Unscrew the bolts and remove the upper and bottom hinges from the cabinet and door . (1) (2) 4.
ST ARTING Final Check Before you start using the freezer check that: 1. The feet have been adjusted and the product is level. 2. The interior is dry and air can circulate freely at the rear . 3. Clean the interior as recommended under "CLEANING AND CARE.
9 STORING FROZEN FOOD Prepacked commercially frozen food should be stored in accordance with the frozen food manufacturer's instructions for a frozen food storage compartment.
FREEZING FRESH FOOD Freezing capacity of your appliance in a 24 hours period is 10 kg (22.1 lb). Never exceed this maximum capacity . Fast freeze compartment (3) is shown in diagram.
1 1 DEFROSTING Defrost twice a year or when a frost layer of around 7 mm (1/4") has formed. T o start defrosting procedure turn the thermostat knob to zero position (Alternatively you may switch off the freezer at the socket outlet and pull out the mains plug.
12 CLEANING AND CARE ** We recommend that you switch of f the freezer at the socket outlet and pull out the mains plug before cleaning. ** Never use any sharp abrasive instrument, soap, household cleaner , detergent and wax polish for cleaning. ** Use luke warm water to clean the cabinet of the freezer and wipe it dry .
13 DO'S AND DON'TS Do- Check contents of the freezer at regular intervals. Do- Clean and defrost your freezer regularly (See "Defrosting") Do- Keep food for as short a time as possible and adhere to "Best Before", "Use By" dates.
14 INST ALLA TION INSTRUCTIONS - DET AILED STEP BY STEP NOTE 1) Height of the product can be adjusted by the help of adjustable feet (front and back) to fit the furniture niche height (B). 2) Do not operate this appliance until it has been installed in the furniture.
15 min.550 B min. 600 min.550 C C 600 D > 150 mm. C D C=100-150 mm.
16 2 7 1 3 4 5 6 3 4 5 6.
17 Note: 1. These dimensions are valid for products,which are hinged on right hand side. 2. When door opening direction is reversed, mirror image of this instruction should be considered. That is, dimensions should be considered for opposite sides. B E E = 1,5 mm is recommended.
18 10 11 12 13 14.
19 15.
20 GUARANTEE DET AILS Y our new Belling product is guaranteed against the cost of breakdown repairs for twelve months from the date of the original purchase. What is covered? • Repairs necessary as a result of faulty materials, defective components or manufacturing defect.
21 Recycling This product bears the selective sorting symbol for waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European Directive 2002/96/EC in order to be recycled or dismantled to minimize its impact on the environment.
PERFORMANCE Energy efficiency class Energy consumption - Kwh/year Net storage - vol fresh food ltrs (cu.ft.) Net storage - vol frozen food ltrs (cu.ft) T otal net vol - ltrs (cu.ft.) Frozen food compartment rating Conservation time from failure Freezing capacity fresh food - kg /24 hrs.
23 WIRING DIAGRAM.
.
.
In case of dif ficulty within the UK, please call Belling Customer Care Centre Helpline on 08 44 815 3746 When you dial this number you will hear a recorde d message and be given a number of options. This indicates that your call has been accepte d and is being held in a queue.
An important point after buying a device Belling BE814 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Belling BE814 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Belling BE814 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Belling BE814 you will learn all the available features of the product, as well as information on its operation. The information that you get Belling BE814 will certainly help you make a decision on the purchase.
If you already are a holder of Belling BE814, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Belling BE814.
However, one of the most important roles played by the user manual is to help in solving problems with Belling BE814. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Belling BE814 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
