Instruction/ maintenance manual of the product WHDBI-5C Westinghouse
Go to page of 16
WIRELESS INTERCOM SYSTEM 5-CHANNEL RADIO INTERCOM Models: WHDBI-5C (One Console & One Doorbell) WHI-5S (One Console) Installation & Operation Instructions Doorbell Console (760) 438-7000 • FAX (760) 438-7043 USA & Canada (800) 421-1587 & (800) 392-0123 Toll Free FAX (800) 468-1340 www.
T ABLE OF CONTENTS CONSOLE DESCRIPTION The 5-channel Wireless Intercom Consoles provide a wireless audio communication link between up to five Console stations and one or two remote Wireless Doorbell Intercom units.
1 CONSOLE FEA TURES 1. ST A TION INDICA TORS Indicators light when a station number button is pressed to sho w the station that will be called. Indicators light to show who called or a call in progress. Indicators fl ash during conv ersation to show the busy stations.
2 DOORBELL FEA TURES 1. MICROPHONE High-gain microphone monitors audio while the Doorbell’ s T ALK button is pressed. 2. SPEAKER Sounds audio from the intercom Console. V olume is adjustable with the volume control (see Item #6). 3. POWER INDICA TOR Lights to show that Doorbell power is on.
3 FOR TABLE OR SHELF MOUNTING... FOR WALL MOUNTING... SWING ANTENNA ALL THE WAY UP POINT ANTENNA STRAIGHT UP FROM CASE SWING ANTENNA OUT FROM BOTTOM OF CASE PLUG IN CONSOLE(S) TRANSFORMER CONNECT DOOR.
4 W ALL MOUNTING THE DOORBELL 214601 C - IMAGE 6 3 1 2 4 USE MOUNTING PLATE AND PENCIL TO MARK SCREW LOCATIONS ATTACH MOUNTING PLATE USING THE SCREWS PROVIDED TILT DOORBELL INTO MOUNTING PLATE SECURE .
5 214601 C - IMAGE 7 ROUTE TRANSFORMER WIRE INTO WIRING SLOT MOUNT CONSOLE ON WALL SCREWS MARK SCREW LOCATIONS AND DRIVE IN SCREWS LEAVING HEADS ABOUT 1/4" OUT NOTE: DO NOT MOUNT THE CONSOLE OUTD.
6 OPERA TING THE DOORBELL & CONSOLE 214601 C - IMAGE 8 3 1 2 4 THE VISITOR PRESSES THE DOORBELL-TALK BUTTON NOTE: THE CONSOLE POWER MUST BE ON, AND THE VOLUME MUST BE SET ABOVE MINIMUM THE VISITOR.
7 214601 C - IMAGE 9 OPERA TING MULTIPLE CONSOLES 3 1 2 4 CALLING ONE CONSOLE FROM ANOTHER CONSOLE WITH CONSOLE POWER ON, PRESS THE BUTTON FOR THE CONSOLE THAT YOU WANT TO CALL (DOORBELLS CAN NOT BE C.
8 CALLING MULTIPLE CONSOLES 214601 C - IMAGE 10 3 1 2 CALLING ALL CONSOLES CHOOSE STATION ALL-CALL HOLD THE ALL CALL BUTTON, WAIT FOR THE BEEP. SPEAK TOWARDS THE CONSOLE RELEASE THE ALL CALL BUTTON WH.
9 ADJUSTING THE DOORBELL ’S VOLUME 214601 C - IMAGE 11 LOW DOORBELL VOLUME HAVE SOMEONE TALK TO THE DOORBELL FROM THE CONSOLE WHILE ADJUSTING THE DOORBELL'S VOLUME HIGH THE DOORBELL'S VOLU.
10 CHANGING A CONSOLE’S SETTINGS 214601 C - IMAGE 12 3 1 2 THE FACTORY SETTING FOR THE FREQUENCY SWITCH IS " A ", SET THE FREQUENCY SWITCHES TO MATCH ON ALL CONSOLES (ALL EITHER " A " OR " B ") 1. START WITH THE POWER OFF (VOLUME KNOB OFF) 2.
11 CHANGING A DOORBELL ’S SETTINGS 214601 C - IMAGE 13 1. BE SURE THE GREEN POWER LIGHT IS OFF (IF THE LIGHT IS ON, WAIT ABOUT 2 MINUTES) 2. USE AN OBJECT TO PRESS AND HOLD THE PROGRAM BUTTON UNTIL A BEEP SOUNDS 3. RELEASE THE PROGRAM BUTTON (BE READY TO COUNT BEEPS) 4.
12 TROUBLESHOOTING SYMPT OM REMED Y POWER INDICA TOR WILL NO T LIGHT BE SURE THE CONSOLE TRANSFORMER IS PLUGGED INT O AN UN-SWITCHED OUTLET BE SURE THE DOORBELL UNIT HAS FRESH 9-V OL T ALKALINE BA TTE.
13 IMPORT ANT FCC NOTICE Radio controls provide a reliable communications link and fill an important need in portable wireless signaling. However, there are some limitations which must be observed. • For U.S. installations only: The radios are required to comply with FCC Rules and Regulations as Part 15 and FRS Part 95 devices.
Copyright © 2003 Linear Corporation 214601 C 214601 C - IMAGE 16.
An important point after buying a device Westinghouse WHDBI-5C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Westinghouse WHDBI-5C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Westinghouse WHDBI-5C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Westinghouse WHDBI-5C you will learn all the available features of the product, as well as information on its operation. The information that you get Westinghouse WHDBI-5C will certainly help you make a decision on the purchase.
If you already are a holder of Westinghouse WHDBI-5C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Westinghouse WHDBI-5C.
However, one of the most important roles played by the user manual is to help in solving problems with Westinghouse WHDBI-5C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Westinghouse WHDBI-5C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center