Instruction/ maintenance manual of the product PTS-9CM20-2 Western Telematic
Go to page of 4
WTI Part No.: 14124 Rev .: A PTS Series Automa tic Power T r a nsf er Switch Models Covered: PTS-8NE15-1 PTS-9CM20-2 Quick Start Guide.
Warnings and Cautions: Installation Instructions Secure Racking If Secure Racked units are installed in a closed or multi-unit rack assembly , they may require further evaluation by Certication Agencies. The following items must be considered. 1. The ambient within the rack may be greater than room ambient.
Page 3 1. Introduction This Quick Start Guide describes the installation procedure for the PTS series hardware. The PTS is essentially a power fallback switch, that automatically switches power from a primary input to a secondary input when power to the primary input is lost or interrupted.
3. Operation When properly installed, the PTS will automatically switch power from the primary input to the secondary input when the power to the primary input is interrupted. After switching from primary to secondary , the PTS will also switch power back to the primary input when power to the primary input is restored.
An important point after buying a device Western Telematic PTS-9CM20-2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Western Telematic PTS-9CM20-2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Western Telematic PTS-9CM20-2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Western Telematic PTS-9CM20-2 you will learn all the available features of the product, as well as information on its operation. The information that you get Western Telematic PTS-9CM20-2 will certainly help you make a decision on the purchase.
If you already are a holder of Western Telematic PTS-9CM20-2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Western Telematic PTS-9CM20-2.
However, one of the most important roles played by the user manual is to help in solving problems with Western Telematic PTS-9CM20-2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Western Telematic PTS-9CM20-2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
