Instruction/ maintenance manual of the product HT-527 Wells
Go to page of 14
PRINTED IN UNITED ST A TES OF AMERICA WELLS BLOOMFIELD, LLC 2 ERIK CIRCLE, P . O. Box 280 V erdi, NV 89439 www .wellsbloomfield.com telephone: 775-689-5703 fax: 775-689-5976 IMPORTANT: DO NOT DI SCARD.
021 303333 OpManual for Built-In Bain Marie Warmers Unless otherwise specified, all commercial cooking equipment manufactured by WELLS BLOOMFIELD, LLC is warranted against defects in ma terials and wo.
W A R R A N T Y x i SPECIFICATIONS 1 FEATURES & OPERATING CONTROLS 2 PRECAUTIONS & GENERAL INFORMATION 3 AGENCY LISTING INFORMATION 3 I N S T A L L A T I O N 4 O P E R A T I O N 6 CLEANING INS.
A. THERMOSTAT On THERMOSTATICALLY CONTROLLED heated ta nks, power is applied to the heating element accord ing to the control knob position and the actual temperature at th e temperature sen s ing thermobulb. The desired temperature is controlled by rotating the TEMPERATURE CONTROL KNOB.
3 PRECAUTIONS AND GENERAL INFORMATION STD 4 E6070 This appliance conforms to NSF Standard 4 for sanitation only if installed in accordance with the supplie d Installation Instructions and maintained according to the in structions in this manual.
INSTALLATION UNPACKING & INSPECTION Carefully remove the appliance from the carton. Remove all protective plastic film, packing materials and accessor ies from the Appliance before connecting electri c al power or otherwise performi ng any installation procedure.
5 3. For “top-mounted” installa tion: a. Verify that provided sealan ts are applied to the underside of the warmer top flange prior to setting the unit into the cutout. b. After installation, verify t hat the tabs on the Wellsloks are turned out to lock the warmer into the counter.
A. WET OPERATION Make sure the drain valve is fully closed before turning thermostat ON . Add approximately 1” of hot tap water before turning the warmer ON . Use of hot water will a llow a faster preheat. 1. For non-autofill units: check the water level frequently and add hot water as necessary to prevent the tank from running dry.
7 DAILY CLEANING INSTRUCTIONS PREPARATIONS: Turn control knob to OFF. Unplug the warm er. Allow warmer to cool before proceeding. Remove any insets, pans and/or ad apte r tops ( if used).
8 CLEANING INSTRUCTIONS (continued) 021 303333 OpManual for Built-In Bain Marie Warmers WEEKLY CLEANING INSTRUCTIO NS PREPARATIONS: Remove any insets, pans and/or adapter tops. Drain or remove water from well if used f or wet operation. FREQUENCY: Weekly, or whenever lime or scale is seen accumulating on the sides of the warm er pans.
9 MAINTENANCE INSTRUCTIONS CARE OF ST AINLESS STEEL Stainless steel is a marvelous material: strong, lustrous and low maintenance. With a minimum of care, it will normally retain its beaut y and durability for the life of the equipment.
10 TROUBLESHOOTING SUGGESTIONS SYMPTOM POSSIBLE CAUSE SUGGESTED REMEDY No power to warmer Circuit breaker off or tripped Reset circuit breaker Unit not plugged in Make sure unit is plugged in to power.
DESCRIPTION PART NO. 6 oz. SOUP LADLE 21764 DRAIN VALVE EXTENSION KIT, extension from drain to counter front with remote handle 20385 DRAIN SCREEN 21709 Wellslok Extension Kits for UL Listed unit s ap.
Genuine Parts Protect - YOU - All - W ays SER VICE TRAINING - QUALITY SER VICE SER VICE TRAINING - QUALITY SERVICE CUSTOMER SA TISF ACTION CUSTOMER SA TISF ACTION Commercial Food Equipment Service Ass.
An important point after buying a device Wells HT-527 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Wells HT-527 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Wells HT-527 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Wells HT-527 you will learn all the available features of the product, as well as information on its operation. The information that you get Wells HT-527 will certainly help you make a decision on the purchase.
If you already are a holder of Wells HT-527, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Wells HT-527.
However, one of the most important roles played by the user manual is to help in solving problems with Wells HT-527. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Wells HT-527 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
