Instruction/ maintenance manual of the product 532 43 46-60 Weed Eater
Go to page of 12
532 43 46-60 Rev . 5 09.22.10 CL Printed in the U.S.A. • Assembly • Operation • Customer Responsibil ities • Repair P arts OWNER’S MANUAL Model Number G26LR V Product No. 960 73 00-27 26 Inch Mower Grass Catcher WARNING Do not operate mower unless container is properlyissubject to wear and detierioration.
2 SAFETY RULES DANGER: THIS CUTTING MACHINE IS CA PA BLE OF AMPUT A TING HANDS AND FEET AND THROWING OBJECTS. F AILURE TO OBSERVE THE FOL L OW ING SAFETY INSTRUCTIONS COULD RESUL T IN SERIOUS INJURY OR DEA TH. I. GENERAL OPERA TION • Read, understand, and follow all instructions on the machine and in the manual before starting.
3 CONGRA TUL A TIONS on your purchase of a new Grass Catcher . It has been designed, en gi neered and manu fac tured to give you the best pos sible de penda bil ity and per form ance. Should you experience any prob lems you can not easily remedy , please contact your nearest au tho rized service center/ department.
4 NOTE : When right hand (R.H.) and left hand (L.H.) are mentioned in this manual, it means when you are seated on the riding mower , in the operator's position. KNOW YOUR GRASS CA TCHER READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE ASSEMBLING OR OPERA TING Y OUR GRAS S CA TCH ER.
5 PULL OUT ON STOP BRACKET TO REMOVE SUPPORT ASSEMBL Y TO REMOVE THE SUPPORT ASSEMBL Y (See Fig. 2B) 1. Pull outward on the stop bracket enough to allow support assembly to be lifted up and away from drawbar . SHOULDER BOL TS SUPPORT ASSEMBL Y REAR MOUNTING BRACKET (See Fig.
6 CONT AINER MOUNTING (See Fig. 4) 1. Install one container to left side first. Install other container to right side. NOTE : Left edge of right con tain er should always over lap right edge of left con tain er at center sup port. 2. Close cover and lock latch over center support tube.
7 INST ALL DEFLECTOR GUARD (See Fig. 5) 1. Using the deflector guard as a template, hold deflector guard on the top of the deflector aligning edge with the holes with bottom of writing and angled end with the rear of the deflector as pictured. 2. Mark locations of (4) holes and drill using supplied #7 drill bit.
8 UPPER CHUTE (See Fig. 7A and 7B) 1. Lower mower to its lowest cutting position. 2. Assemble upper chute by inserting curved end into hole in back of cover . TIP: Holding upper chute as shown and twisting while ins- talling in cover will help keep the rubber seal in place.
9 COUNTERWEIGHT (See Fig. 9) 1. Lower mower to lowest position to allow access to front axle. 2. T urn steering wheel all the way to the right, for access to left side of axle 3. With extension and socket, insert bolt, lock washer , and washer through hole in axle.
10 TIPS FOR IMPROVED BAGGING OPE RA TION: Follow the mower operation instructions in your riding mower owner's manual. When operating your grass catcher on a lawn where grass and leaf bagging equipment has not been used, you are picking up thatch and debris that has accumulated for long periods of time.
11 GENERAL RECOMMENDA TIONS Always observe safety rules when performing any main- te nance. • Before each use check for loose fasteners. • Clean unit thoroughly after each use. BL ADE CARE For best results, mower blade must be kept sharp. Re place bent or damaged blade.
12 29 532 17 01-65 Bolt, Shoulder 5/16-18 31 532 17 40-83 Plug, T ubing End 32 532 17 97-46 Bagger , F rame 33 532 19 27-86 Pin, Hinge 34 532 12 75-34 Gasket, Cover 35 532 42 91-13 Container 38 532 13.
An important point after buying a device Weed Eater 532 43 46-60 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Weed Eater 532 43 46-60 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Weed Eater 532 43 46-60 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Weed Eater 532 43 46-60 you will learn all the available features of the product, as well as information on its operation. The information that you get Weed Eater 532 43 46-60 will certainly help you make a decision on the purchase.
If you already are a holder of Weed Eater 532 43 46-60, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Weed Eater 532 43 46-60.
However, one of the most important roles played by the user manual is to help in solving problems with Weed Eater 532 43 46-60. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Weed Eater 532 43 46-60 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
