Instruction/ maintenance manual of the product 2415 Wayne-Dalton
Go to page of 16
® CONTENTS WARNING: It is recommended that installa- tion , repairs, or adjustments of this product be made by a qualified door agency. IMPORT ANT An overhead door is a large heavy object that moves with the help of springs under high tension. Moving objects and springs under tension can cause injuries.
PG. 15 OPERATOR ARM (SUPPLIED BY OTHERS) CENTER HINGES 6” WELDED TRUSS 1/4-20 X 7/8” TEK SCREWS OPERATOR ARM (SUPPLIED BY OTHERS) 1-1/2” X 2-1/4” ANGLE (CUT TO FIT BETWEEN STRUT AND CENTER HIN.
PG. 3 DIM Y HEADER TO SHAFT CENTERLINE MINIMUM HEADROOM REQUIRED (REFER TO ABOVE CHART) 8” for 2” TRACK 12” for 3” TRACK EXTEND JAMBS TO OPENING HEIGHT plus DIM Y plus 1 1/2” (MINIMUM LENGTH.
PG. 4 STEP 10: Attaching the Back Hanger Angles: Apply another locking pliers above the No. 2 or No. 3 roller and then remov e the locking pliers fr om the top roller .
3” TRACK 1/4” GRADU ATION 9 SECTIONS HIGH OR LESS FIG.F FIG.I FIG.H FIG.G Align the appropriate end hinge to the pre-punched holes in the stiles and secure using (2) 1/4” x 5/8” self tapping screws per hinge. Products 16’2” wide and less require (1) end hinge (fig .
(2) 3/8” Nuts and W ashers To p Plate Perimeter Seal Spring Mounting Pad. 2 x 6” White Pine or Denser . Secured with min. (4) 5/16” x 4” lag bolts into header .
PG. 7 PG. 10 FOUR SPRINGS (3-3/4” & 6”) (6” Shown) * NO TE: COUPLING USED ON SOLID SHAFT ONL Y . TIGHTEN CONNECTING BOL TS AFTER WINDING SPRINGS .
PG. 9 PG. 8 STEP 8. Installing the Horiz ontal T r ac k: Use chain or ca b le to suspend the rear of the horizontal tracks. Secure the horizontal reinforcing angle to the wall angle using (1) 3/8” x 3/4” truss bolt and nut, then secure the horizontal track to the splice plate or flagangle using (2) track bolts and hex flange nuts.
PG. 9 PG. 8 STEP 8. Installing the Horiz ontal T r ac k: Use chain or ca b le to suspend the rear of the horizontal tracks. Secure the horizontal reinforcing angle to the wall angle using (1) 3/8” x 3/4” truss bolt and nut, then secure the horizontal track to the splice plate or flagangle using (2) track bolts and hex flange nuts.
PG. 7 PG. 10 FOUR SPRINGS (3-3/4” & 6”) (6” Shown) * NO TE: COUPLING USED ON SOLID SHAFT ONL Y . TIGHTEN CONNECTING BOL TS AFTER WINDING SPRINGS .
(2) 3/8” Nuts and W ashers To p Plate Perimeter Seal Spring Mounting Pad. 2 x 6” White Pine or Denser . Secured with min. (4) 5/16” x 4” lag bolts into header .
3” TRACK 1/4” GRADU ATION 9 SECTIONS HIGH OR LESS FIG.F FIG.I FIG.H FIG.G Align the appropriate end hinge to the pre-punched holes in the stiles and secure using (2) 1/4” x 5/8” self tapping screws per hinge. Products 16’2” wide and less require (1) end hinge (fig .
PG. 4 STEP 10: Attaching the Back Hanger Angles: Apply another locking pliers above the No. 2 or No. 3 roller and then remov e the locking pliers fr om the top roller .
PG. 3 DIM Y HEADER TO SHAFT CENTERLINE MINIMUM HEADROOM REQUIRED (REFER TO ABOVE CHART) 8” for 2” TRACK 12” for 3” TRACK EXTEND JAMBS TO OPENING HEIGHT plus DIM Y plus 1 1/2” (MINIMUM LENGTH.
PG. 15 OPERATOR ARM (SUPPLIED BY OTHERS) CENTER HINGES 6” WELDED TRUSS 1/4-20 X 7/8” TEK SCREWS OPERATOR ARM (SUPPLIED BY OTHERS) 1-1/2” X 2-1/4” ANGLE (CUT TO FIT BETWEEN STRUT AND CENTER HIN.
® CONTENTS WARNING: It is recommended that installa- tion , repairs, or adjustments of this product be made by a qualified door agency. IMPORT ANT An overhead door is a large heavy object that moves with the help of springs under high tension. Moving objects and springs under tension can cause injuries.
An important point after buying a device Wayne-Dalton 2415 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Wayne-Dalton 2415 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Wayne-Dalton 2415 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Wayne-Dalton 2415 you will learn all the available features of the product, as well as information on its operation. The information that you get Wayne-Dalton 2415 will certainly help you make a decision on the purchase.
If you already are a holder of Wayne-Dalton 2415, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Wayne-Dalton 2415.
However, one of the most important roles played by the user manual is to help in solving problems with Wayne-Dalton 2415. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Wayne-Dalton 2415 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
