Instruction/ maintenance manual of the product BlueParrott B10 VXI
Go to page of 24
USER GUIDE VXI BlueParrott B10 VXI BlueParrott TalkPro B10-GTX Wireless Bluetooth Headsets.
2 VXI. Connecting people to a digital world..
3 Table of Contents Basic Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Glossary of Terms . . . . . . . . . . . . . . .
4 BASIC SAFETY INSTRUCTIONS CAUTION Do not use headset while it is being charged in a VXI BlueParrott B50 charger. Danger of explosion if battery incorrectly replaced. Replace only with the same or equivalent battery type as recommended by the manufacturer.
5 Adjustable headband T-bar Noise canceling microphone PRODUCT FEATURES Multi-function button with indicator lights Volume (increase)/Mute control Volume (decrease) Note: The B10-GTX has a more sensitive microphone for superior accuracy results with speech recognition applications.
6 GLOSSARY OF TERMS Standby Mode – Headset is on, but not in Talk Time mode. The yellow indicator light will flash slowly, every 4-5 seconds. Standby Mode is automatic after remov- ing headset from the charger. Standby time is up to 100 hours on a full charge.
7 MAXIMIZING RANGE The range of communication distance between the headset and another Bluetooth device varies as follows. If the headset is being used with a Bluetooth cellular phone, PDA or computer, the range is typically the same as the Bluetooth standard of 33 feet.
8 CHARGING THE HEADSET Before first time operation, the headset must be charged for 4-8 hours*. The headset can be charged with a VXI BlueParrott B50 charger (see photo at left) or by being placed in the base unit of a VXI BlueParrott wireless headset system (see photo at right).
9 LOW BATTERY INDICATION When the headset battery is at the end of its charge, you will hear tones and/or beeps in the headset. This will happen when you are not pressing any control but- tons. When you hear these tones/beeps, switch immediately to your phone handset.
10 HEADSET ADJUSTMENTS / MICROPHONE POSITIONING See page 5 for product features. Headset Adjustment 1. Place the headset on your head with the ear cushion on your left or right ear. 2. Swivel microphone boom up and over, if necessary, to bring it to the chosen side.
11 BASIC OPERATIONS See page 5 for location of button controls. Standby Mode / Talk Time The headset is automatically in Standby Mode when you remove it from the charger, therefore, a single press of the multifunction button will put the headset into Talk Time mode (you will hear a single beep).
12 PAIRING See page 5 for location of button controls. You must pair the headset with your Bluetooth device before first use. Before Pairing: Turn the Headset Off If the yellow light on the headset is.
13 You will hear two series of melodic tones (hold it up to your ear). The yellow and red indicator lights on the headset will flash alternately. Release the multifunction button. This puts the headset in pairing mode. 4. Refer to your other Bluetooth device’s user manual for instructions on how to pair the other Bluetooth device to the headset.
14 HEADSET VOLUME AND MUTE CONTROLS see Product Features page 5 Adjust Speaker Volume To adjust the volume in your earpiece, press the increase or decrease volume button for 1 second, then release. Repeat until volume is at desired level. You will hear a sin- gle beep each time you press the button.
15 4. To end the call, press the multifunction button on the headset for 1 second. You will hear a beep and the headset will disconnect from the call. Deactivate your cellular phone. Answer A Call / End A Call Before answering, make sure the headset is on (page 11).
16 USING THE HEADSET WITH OTHER BLUETOOTH DEVICES Before use, make sure the headset is on (page 11). To use the headset with a VXI BlueParrott base, consult the user guide that came with the base. For use with Bluetooth cell phones, see page 14. For all other non-VXI products, please read below.
17 VISUAL AND AUDIO INDICATORS EXPLAINED Headset Indicator Lights / While In Charger: Multifunction button not lit Headset not receiving charge Green light Fully charged/Okay to use Red light Partiall.
18 FAQS / TROUBLESHOOTING Why don't I hear a dial tone (phone or VoIP applications)? 1. Make sure the headset is turned on (page 11). 2. Were the Bluetooth units paired together before first use (page 12)? 3 . Be sure that the headset connection has been activated on the other Bluetooth device.
19 Why do I have the sensation of hearing my own voice too loudly in my ear? (this is called “excessive sidetone”) 1. First, check and establish acceptable volume settings on the phone’s handset. 2. Move the microphone slightly away from your mouth.
20 USA FCC Part 15 FCC Notice to Users/Product Statements This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
21 VXI LIMITED WARRANTY 1. VXI warrants that your VXI BlueParrott headset will be free from defects in material and work- manship for two years from the date of purchase.
.
.
A brand of VXI Corporation One Front Street. Rollinsford, NH 03869 800-742-8588 I 603-742-2888 PN202003B.
An important point after buying a device VXI BlueParrott B10 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought VXI BlueParrott B10 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data VXI BlueParrott B10 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, VXI BlueParrott B10 you will learn all the available features of the product, as well as information on its operation. The information that you get VXI BlueParrott B10 will certainly help you make a decision on the purchase.
If you already are a holder of VXI BlueParrott B10, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime VXI BlueParrott B10.
However, one of the most important roles played by the user manual is to help in solving problems with VXI BlueParrott B10. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device VXI BlueParrott B10 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
