Instruction/ maintenance manual of the product VSX 9000 Vulcan-Hart
Go to page of 12
VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201- 0696, TEL. (502) 778-2791 SER VICE & P AR TS MANUAL FOR ELECTRIC COUNTER T OP CONVECTION STEAMER MODEL VSX9000 FORM 30847 (1-94).
THIS P AGE INTENTIONALL Y LEFT BLANK.
- 3 - T ABLE OF CONTENTS GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 WATER QUALITY . . . . . . . . . . . . . . . . . . . . . . . .
- 4 - Service and Parts Manual MODEL VSX9000 ELECTRIC COUNTERTOP CONVECTION STEAMER PLEASE KEEP THIS MANUAL GENERAL Your Vulcan Steamer is a one-compartment pressureless steam cooker that has been factory assembled and tested to provide for easy installation.
- 5 - TROUBLESHOOTING PROBLEM POSSIBLE CAUSES Cold water flowing continuously into Either or both solenoid valves are not closing when the steamer drain during shutdown. is OFF. Contact your Vulcan-Hart authorized servicer or Vulcan- Hart Company, Louisville, KY (phone number is listed on the front of this manual).
- 6 - TESTING PROCEDURES WARNING: THE STEAMER AND ITS PARTS ARE HOT. USE CARE WHEN OPERATING, CLEANING OR SERVICING THE STEAMER. THE COOKING COMPARTMENT CONTAINS LIVE STEAM. STAY CLEAR WHILE OPENING THE DOOR. Once the steamer is installed and all mechanical connections have been made, thoroughly test the steamer before operation.
- 7 - 5. Check drain line to ensure that water from the cold water condenser is flowing through the drain line. 6. Open compartment door and observe that steam supply to the chamber is cut off (READY light should again come on). 7. Close compartment door and let cooking cycle finish.
- 8 - HEATER ELEMENTS DO NOT COME ON When the steamer is turned ON and heater elements do not activate, and therefore, the READY light does not come on, then the contactors may be burned out.
- 9 - REPLACEMENT P ARTS LIST REPLACEMENT PARTS ORDERING Parts may be ordered only from your authorized parts and service depot. The following information must accompany a replacement parts order or it cannot be filled. A. Model and style or serial number.
- 10 - VSX9000 STEAMER.
- 11 - REPLACEMENT P ARTS ITEM NO. PART NO. DESCRIPTION QTY. 1 844191 Door Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 844192 Door Panel . . . . . . . . . . . . . . . . . . . . . . . . . .
- 12 - WIRING DIAGRAM FORM 30847 (1-94) PRINTED IN U.S.A..
An important point after buying a device Vulcan-Hart VSX 9000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vulcan-Hart VSX 9000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vulcan-Hart VSX 9000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vulcan-Hart VSX 9000 you will learn all the available features of the product, as well as information on its operation. The information that you get Vulcan-Hart VSX 9000 will certainly help you make a decision on the purchase.
If you already are a holder of Vulcan-Hart VSX 9000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vulcan-Hart VSX 9000.
However, one of the most important roles played by the user manual is to help in solving problems with Vulcan-Hart VSX 9000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vulcan-Hart VSX 9000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
