Instruction/ maintenance manual of the product VBP15 ML-126356 Vulcan-Hart
Go to page of 12
VBP SERIES FOOD HOLDING AND TRANSPOR T CABINETS MODELS VBP4 ML-126352 VBP7 ML-126353 VBP13 ML-126355 VBP15 ML-126356 VBP40 ML-126357 VBP7 I ML-126358 VBP13 I ML-126359 VBP15 I ML-126360 VBP77 ML-12635.
– 2 – T ABLE OF CONTENTS GENERAL ............................................................................................................................................. 3 INSTALLATION .........................................................
– 3 – Installation, Operation and Care of MODEL VBP SERIES FOOD HOLDING AND TRANSPORT CABINETS PLEASE KEEP THIS MANUAL FOR FUTURE USE GENERAL Vulcan-Hart Holding and Transport Cabinets are produced with quality workmanship and material.
– 4 – INST ALLA TION Before installing, verify that the electrical service agrees with the specifications on the rating plate located on the lower left corner. If the supply and equipment requirements do not agree, do not proceed with the installation.
– 5 – INSTALLATION CODES AND STANDARDS The cabinet must be installed in accordance with: In the United States of America: 1. State and local codes. 2. National Electrical Code, ANSI/NFPA-70 (latest edition). Copies may be obtained from The National Fire Protection Association, Batterymarch Park, Quincy, MA 02269.
– 6 – Electrical Table Model Voltage Amp Phase Hz NEMA Plug VBP4 110/120 10 16 0 5-15 208/240 5.4 6-15 VBP7 110/120 10 16 0 5-15 208/240 5.4 6-15 VBP13 110/120 10 16 0 5-15 208/240 5.4 6-15 VBP15 110/120 10 16 0 5-15 208/240 5.4 6-15 VBP40 110/120 16.
– 7 – WIRING DIAGRAMS VBP4, VBP7, VBP13, VBP15, VBP40, VBP7 I , VBP13 I , VBP15 I.
– 8 – VBP77, VBP77 I.
– 9 – VBP8H I , VBP12H I , VBP15H I.
– 10 – OPERA TION WARNING: THE CABINET AND ITS PARTS ARE HOT. BE VERY CAREFUL WHEN OPERATING, CLEANING OR SERVICING THE CABINET. CONTROLS Fig. 1 All Models (Fig.1) POWER INDICATOR LIGHT – Lit when power is supplied to cabinet. HEAT INDICATOR LIGHT – Lit when heat is supplied to cabinet.
– 11 – OPERATING CABINET 1. Connect electric power supply. • Power indicator light is lit. 2. If cabinet is a VBP8H I , VBP12H I , or VBP15H I , press ON/OFF switch ON. • Interior air circulating fans start. • Control/component compartment cooling fans start.
– 12 – Shutdown If cabinet is a VBP8H I , VBP12H I , or VBP15H I , press ON/OFF switch OFF. Extended Shutdown Unplug electrical power supply. Power indicator light will go off. CLEANING WARNING: UNPLUG ELECTRICAL POWER SUPPLY BEFORE CLEANING. Clean cabinet interior with a mild soap and water whenever food spill occurs.
An important point after buying a device Vulcan-Hart VBP15 ML-126356 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vulcan-Hart VBP15 ML-126356 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vulcan-Hart VBP15 ML-126356 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vulcan-Hart VBP15 ML-126356 you will learn all the available features of the product, as well as information on its operation. The information that you get Vulcan-Hart VBP15 ML-126356 will certainly help you make a decision on the purchase.
If you already are a holder of Vulcan-Hart VBP15 ML-126356, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vulcan-Hart VBP15 ML-126356.
However, one of the most important roles played by the user manual is to help in solving problems with Vulcan-Hart VBP15 ML-126356. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vulcan-Hart VBP15 ML-126356 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center