Instruction/ maintenance manual of the product ML-103839 Vulcan-Hart
Go to page of 24
– 1 – 1024,1036,1048 CHEESEMEL TER MODELS 1024C ML-103833 1024W ML-103834 1024P ML-103835 1036C ML-103836 1036W ML-103837 1036P ML-103838 1048C ML-103839 Canadian ML-126600 1048W ML-103840 Canadia.
– 2 –.
– 3 – © VULCAN-HART COMPANY, 1998 T ABLE OF CONTENTS GENERAL ............................................................................................................................................. 4 Specifications ..........................
– 4 – OPERA TION & INST ALLA TION MODELS 1024,1036,1048 CHEESEMEL TERS PLEASE KEEP THIS MANUAL FOR FUTURE USE GENERAL Vulcan-Hart Cheesemelters are produced with quality workmanship and material. Proper installation, usage, and maintenance of your cheesemelter will result in many years of satisfactory performance.
– 5 – INST ALLA TION UNPACKING This cheesemelter was inspected before leaving the factory. The transportation company assumes full responsibility for safe delivery upon acceptance of the shipment. Immediately after unpacking, check for possible shipping damage.
– 6 – INSTALLATION CODES AND STANDARDS The cheesemelter must be installed in accordance with: In the United States of America: 1. State and local codes. 2. National Electrical Code, ANSI/NFPA-70 (latest edition). Copies may be obtained from The National Fire Protection Association, Batterymarch Park, Quincy, MA 02269.
– 7 –.
– 8 – HEATER INSTALLATION 1. Push one end of the heater into one socket as far as it will go. 2. Swing the other end of heater up until it lines up with the opposite socket. 3. Release heater and it will snap into place. 4. Grasp the heater and move it back and forth to ensure that it is centered correctly.
– 9 – ELECTRICAL CONNECTIONS WARNING: ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH THE APPLICABLE PORTIONS OF THE NATIONAL ELECTRICAL CODE AND/OR OTHER LOCAL ELECTRICAL CODES. WARNING: DISCONNECT ELECTRICAL POWER SUPPLY AND PLACE A TAG AT THE DISCONNECT SWITCH TO INDICATE YOU ARE WORKING ON THE CIRCUIT.
– 10 – OPERA TION WARNING: THE CHEESEMELTER AND ITS PARTS ARE HOT. BE VERY CAREFUL WHEN OPERATING, CLEANING, OR SERVICING THE CHEESEMELTER. 1. Push the main switch to ON. • Pilot lights. • Cooling fan runs. 2. Place the product on the front of the rack.
– 11 – TROUBLESHOOTING IF THE CHEESMELTER BLOWS A FUSE OR TRIPS A CIRCUIT BREAKER 1 . Check the capacity of the circuit. 2 . Contact your local Hobart Food Equipment Group office. IF THE HEATERS DO NOT LIGHT 1 . If the pilot light does not come on, and the cooling fan does not run, check for a blown fuse or an open circuit breaker.
– 12 – NOTES.
– 1 – SALAMANDRES 1024, 1036 ET 1048 MODÈLES 1024C ML-103833 1024W ML-103834 1024P ML-103835 1036C ML-103836 1036W ML-103837 1036P ML-103838 1048C ML-103839 Canada ML-126600 1048W ML-103840 Canada ML-126602 1048P ML-103841 Canada ML-126601 MODE D’EMPLOI Modèle 1024 F33225B (599) IMPRIMÉ AUX É.
– 2 –.
– 3 – © VULCAN-HART COMPANY, 1998 T ABLE DES MA TIÈRES GÉNÉRALITÉS .................................................................................................................................... 4 Caractéristiques ......................
– 4 – CARACTÉRISTIQUES MODÈLE 1024C 1024W 1024P 1036C 1036W 1036P 1048C 1048W 1048P DIMENSIONS Largeur 686 686 686 927 927 927 1270 1270 1270 mm (po) (27) (27) (27) (36 1/2) (36 1/2) (36 1/2) (5.
– 5 – INST ALLA TION DÉBALLAGE Cet appareil a été inspecté avant de quitter l’usine. En acceptant de livrer cette marchandise, le transporteur en assume l’entière responsabilité jusqu’à la livraison. Immédiatement après avoir déballé l’appareil, vérifier s’il n’a pas été endommagé lors du transport.
– 6 – CODES D’INSTALLATION ET NORMES L’installation de ces salamandres doit se faire selon les codes suivants : Aux États-Unis : 1. Codes locaux. 2. Norme ANSI/NFPA n° 70 (dernière édition) du National Electrical Code disponible auprès de la National Fire Protection Association, Batterymarch Park, Quincy, MA 02269.
– 7 – APPAREIL ISOLANT PANNEAU ARRIÈRE TIRE-FONDS VIS DE RETENUE DU PANNEAU ARRIÈRE.
– 8 – INSTALLATION DES ÉLÉMENTS CHAUFFANTS 1. Enfoncer une des extrémités de l’élément chauffant aussi loin que possible dans une douille. 2. Aligner l’autre extrémité avec la douille opposée. 3. Relâcher l’élément chauffant et il s’enclenche en place.
– 9 – RACCORDEMENT ÉLECTRIQUE AVERTISSEMENT : LE RACCORDEMENT ÉLECTRIQUE ET LA MISE À LA TERRE DOIVENT ÊTRE CONFORMES AUX NORMES CONCERNÉES DU CODE CANADIEN DE L’ÉLECTRICITÉ OU DE TOUT AUTRE CODE D’ÉLECTRICITÉ EN VIGUEUR.
– 10 – FONCTIONNEMENT AVERTISSEMENT : LA SALAMANDRE ET SES COMPOSANTS SONT CHAUDS. EXERCER UNE EXTRÊME PRUDENCE LORS DE SON UTILISATION, NETTOYAGE ET ENTRETIEN. 1. Mettre l’interrupteur général sous tension. • Le voyant s’allume. • Le ventilateur se met en marche.
– 11 – DÉP ANNA GE FUSIBLE GRILLÉ OU DISJONCTEUR DÉCLENCHÉ 1. Vérifier la capacité du circuit. 2. Communiquer avec le service de l’entretien Hobart le plus près.
– 12 – NO T A.
An important point after buying a device Vulcan-Hart ML-103839 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vulcan-Hart ML-103839 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vulcan-Hart ML-103839 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vulcan-Hart ML-103839 you will learn all the available features of the product, as well as information on its operation. The information that you get Vulcan-Hart ML-103839 will certainly help you make a decision on the purchase.
If you already are a holder of Vulcan-Hart ML-103839, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vulcan-Hart ML-103839.
However, one of the most important roles played by the user manual is to help in solving problems with Vulcan-Hart ML-103839. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vulcan-Hart ML-103839 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
