Instruction/ maintenance manual of the product MGCB34 Vulcan-Hart
Go to page of 12
MGCB SERIES MEDIUM DUTY GAS CHARBROILERS MODEL MGCB18 ML-103821 MGCB24 ML-103822 MGCB29 ML-103823 MGCB34 ML-103825 VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201-0696, TEL.
— 2 — IMPORT ANT FOR YOUR SAFETY THIS MANUAL HAS BEEN PREPARED FOR PERSONNEL QUALIFIED TO INSTALL GAS EQUIPMENT, WHO SHOULD PERFORM THE INITIAL FIELD START-UP AND ADJUSTMENTS OF THE EQUIPMENT COVERED BY THIS MANUAL. POST IN A PROMINENT LOCATION THE INSTRUCTIONS TO BE FOLLOWED IN THE EVENT THE SMELL OF GAS IS DETECTED.
— 3 — T ABLE OF CONTENTS GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
— 4 — Installation, Operation and Care of MODEL MGCB SERIES GAS CHARBROILERS PLEASE KEEP THIS MANUAL FOR FUTURE USE GENERAL Vulcan charbroilers are produced with quality workmanship and material. Proper installation, usage and maintenance of your charbroiler will result in many years of satisfactory performance.
— 5 — When installed, minimum clearance from combustible construction must be 6" at the sides and 6" at the rear; minimum clearance from non-combusible construction must be 4" at the sides and 4" at the rear. The installation location must allow adequate clearances for servicing and proper operation.
— 6 — Fig. 2 Fig. 1.
— 7 — LEVELING Place a carpenter's level on top of the charbroiler. Level the charbroiler front to back and side to side by turning the adjustment screw at the bottom of each leg. GAS CONNECTIONS Gas supply connections and any pipe joint compound must be resistant to the action of propane gases.
— 8 — OPERA TION WARNING: THE CHARBROILER AND ITS PARTS ARE HOT. USE CARE WHEN OPERATING, CLEANING OR SERVICING THE CHARBROILER. CONTROLS The Thermostats regulate gas flow to the burners to maintain set temperature. BEFORE FIRST USE Clean the protective metal oils from all surfaces of the charbroiler.
— 9 — TURNING THE CHARBROILER ON All burners are lit from constantly burning pilots. Turn control knobs to HI to ignite the burners. TURNING THE CHARBROILER OFF Turn control knobs to OFF. Extended Shutdown Turn control knobs to OFF. Turn the manual shutoff valve to OFF.
— 10 — CLEANING At least once a day, remove the grease pan, empty and wash it out in the same way you would any cooking utensil. "Burn off" the grease build-up on the grate daily or as dictated by use. Always use insulated gloves when handling grates or radiants to prevent burns.
— 11 — MAINTENANCE WARNING: THE CHARBROILER AND ITS PARTS ARE HOT. USE CARE WHEN OPERATING, CLEANING OR SERVICING THE CHARBROILER. LUBRICATION All valves and thermostats must be checked and lubricated periodically by your local service agency.
— 12 — FORM 31008 (11-96) (Formerly 990503) PRINTED IN U.S.A..
An important point after buying a device Vulcan-Hart MGCB34 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vulcan-Hart MGCB34 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vulcan-Hart MGCB34 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vulcan-Hart MGCB34 you will learn all the available features of the product, as well as information on its operation. The information that you get Vulcan-Hart MGCB34 will certainly help you make a decision on the purchase.
If you already are a holder of Vulcan-Hart MGCB34, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vulcan-Hart MGCB34.
However, one of the most important roles played by the user manual is to help in solving problems with Vulcan-Hart MGCB34. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vulcan-Hart MGCB34 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
