Instruction/ maintenance manual of the product K12ETT Vulcan-Hart
Go to page of 12
INST ALLA TION & OPERA TION MANUAL FORM 35455 (11-08) ELECTRIC TIL TING COUNTER KETTLES MODELS K6ETT ML-136067 K12ETT ML-136068 K20ETT ML-136069 For additional information on Vulcan-Hart or to locate an authorized parts and service provider in your area, visit our website at www.
— 2 — ELECTRIC TILTING COUNTER KETTLES IMPORT ANT FOR YOUR SAFETY THIS MANUAL HAS BEEN PREP ARED FOR PERSONNEL QUALIFIED TO INST ALL ELECTRICAL EQUIPMENT , WHO SHOULD PERFORM THE INITIAL FIELD ST ART -UP AND ADJUSTMENTS OF THE EQUIPMENT COVERED BY THIS MANUAL.
— 3 — ELECTRIC TILTING COUNTER KETTLES T ABLE OF CONTENTS GENERAL ......................................................................................................................................... 4 Unpacking ...............................
— 4 — ELECTRIC TILTING COUNTER KETTLES INST ALLA TION, OPERA TION AND MAINTENANCE OF K6ETT , K12ETT , K20ETT ELECTRIC STEAM TIL TING KETTLES SAVE THESE INSTRUCTIONS FOR FUTURE USE GENERAL Vulcan countertop tilting kettles are produced with quality workmanship and material.
— 5 — ELECTRIC TILTING COUNTER KETTLES Before installing, verify that the electrical supply required for the equipment covered by this manual agrees with the specifications on the machine data plate, located on the back of the unit. The data plate for the kettle is located on the control box.
— 6 — ELECTRIC TILTING COUNTER KETTLES INSTALLING ELECTRIC KETTLE ON COUNTER Fig. 3 Mounting Hole Location 1 . Position the kettle on the counter or stand in its final installed location with sufficient rear clearance (see Table 2 for minimum required clearance) from the wall to allow the kettle to tilt completely without obstruction.
— 7 — ELECTRIC TILTING COUNTER KETTLES The kettle and its parts are hot. Use care when operating, cleaning or servicing the kettle . VENTING While the kettle is cold, check the vacuum/ pressure gauge. The gauge should be in the vacuum zone measuring between 25 to 30 in.
— 8 — ELECTRIC TILTING COUNTER KETTLES TABLE 4. CONTROLS AND INDICA TORS Item Function Tilt Handle T ilts kettle. Power ON/OFF Switch Controls power to the kettle. Power ON Indicator (Amber) When lit, unit powered. Low W ater Indicator (Red) When lit, indicates insufficient water in the kettle jacket.
— 9 — ELECTRIC TILTING COUNTER KETTLES Disconnect electrical power to the machine and follow Lockout/Tagout procedures before cleaning. NOTE: Do not hose down under any condition.
— 10 — ELECTRIC TILTING COUNTER KETTLES SYMPTOMS POSSIBLE CAUSES/REMEDY Power switch not turned on/T urn on kettle power switch. Kettle unplugged/Plug kettle in. Breaker tripped or turned off/Reset or turn breaker on. Internal fuse failed/Call authorized servicer .
— 11 — ELECTRIC TILTING COUNTER KETTLES To obtain service and parts information concerning this model, contact the Vulcan-Hart Service Agency in your area (refer to our website, www.vulcanhart.com for a complete listing of Authorized Service and Parts depots).
— 12 — ELECTRIC TILTING COUNTER KETTLES (11-08) PRINTED IN U.S.A ..
An important point after buying a device Vulcan-Hart K12ETT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vulcan-Hart K12ETT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vulcan-Hart K12ETT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vulcan-Hart K12ETT you will learn all the available features of the product, as well as information on its operation. The information that you get Vulcan-Hart K12ETT will certainly help you make a decision on the purchase.
If you already are a holder of Vulcan-Hart K12ETT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vulcan-Hart K12ETT.
However, one of the most important roles played by the user manual is to help in solving problems with Vulcan-Hart K12ETT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vulcan-Hart K12ETT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
