Instruction/ maintenance manual of the product ICM24 ML-52470 Vulcan-Hart
Go to page of 8
VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201-0696, TEL. (502) 778-2791 FORM 30908 (11-94) GAS INFRARED CHEESE MEL TERS MODEL ICM24 ML-52470, 52476 ICM36 ML-52471, 52477 ICM48 ML-52472, 5247.
– 2 – IMPORT ANT FOR YOUR SAFETY THIS MANUAL HAS BEEN PREPARED FOR PERSONNEL QUALIFIED TO INSTALL GAS EQUIPMENT, WHO SHOULD PERFORM THE INITIAL FIELD START-UP AND ADJUSTMENTS OF THE EQUIPMENT COVERED BY THIS MANUAL. POST IN A PROMINENT LOCATION THE INSTRUCTIONS TO BE FOLLOWED IN THE EVENT THE SMELL OF GAS IS DETECTED.
– 3 – Installation, Operation, and Care of MODELS ICM24, ICM36, ICM48, ICM60 & ICM72 GAS INFRARED CHEESE MEL TERS KEEP THIS MANUAL FOR FUTURE USE GENERAL The Vulcan Gas Infrared Cheese Melters use efficient gas heat and are available in 24, 36, 48, 60, or 72 inch widths.
– 4 – Wall Mounting Brackets Angle Iron on Rear of Cheese Melter Frame ASSEMBLY — Legs (optional) If using legs, four legs are required on 24, 36, and 48" models; six legs are required on 60 and 72" models.
– 5 – GAS CONNECTION Caution: The pipe thread compound used when installing pipes must be a type that is resistant to the action of liquified petroleum or propane gases. Codes require that a manual gas valve be installed in the gas supply line ahead of the appliance.
– 6 – OPERA TION WARNING : THE CHEESE MELTER AND ITS PARTS ARE HOT. USE CARE WHEN OPERATING, CLEANING, AND SERVICING THE CHEESE MELTER. CONTROLS (Fig. 4) Burner Valve — Turn fully ON or OFF by rotating the control knob 1/4 turn. Fig. 4 The Cheese Melter rack can be positioned in one of the three operating levels.
– 7 –.
– 8 – FORM 30908 (11-94) PRINTED IN U.S.A..
An important point after buying a device Vulcan-Hart ICM24 ML-52470 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vulcan-Hart ICM24 ML-52470 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vulcan-Hart ICM24 ML-52470 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vulcan-Hart ICM24 ML-52470 you will learn all the available features of the product, as well as information on its operation. The information that you get Vulcan-Hart ICM24 ML-52470 will certainly help you make a decision on the purchase.
If you already are a holder of Vulcan-Hart ICM24 ML-52470, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vulcan-Hart ICM24 ML-52470.
However, one of the most important roles played by the user manual is to help in solving problems with Vulcan-Hart ICM24 ML-52470. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vulcan-Hart ICM24 ML-52470 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
