Instruction/ maintenance manual of the product I5808 VTech
Go to page of 44
.
CORDLESS Troubleshooting TAGS 250 De-register and register De-register hands et from the E2525, E2600B and E2555 Please take the Handset out of the Base before de-registering. Using the [SOFT] Keys on the Base, press MENU, then press the Down arrow twice until BASE SETTINGS is highlighted.
The Handset provided with your telephone is automatically registered as Handset 1. Additional Handsets will be assigne d numbers in the order the ar e registered (2, 3, 4, etc.) up to a maximum of eight. Keypad Tone Featur e - Vtech Telephones When the Keypad Tone Feature is ON but the handset is OFF (i.
button, and the [OFF] button em itted through the external speaker on th e back of the handset. 2.You will not hear any tone when you press the [SOUND SELECT] button.
When the Keypad Tone Feature is ON a nd the Speakerphone on the handset is ON: 1.You will hear the tones from the number bu ttons ([0] - [ 9]), the [SOFTKEY] buttons (the three unnamed buttons under t.
·Every call conversation cuts in and out, other end hears beeps. 1.Advise the customer that you (the rep) wi ll place a no charge replacement order that will be shipped via UPS service, which should arrive within 14 days.
· After placing the order, se nd an internal r eferral commitm ent to the [VTECH ARS LABEL] team for a prepaid UPS ARS La bel to be sent to the customer. NOTE: DO NOT SEND TH ESE CUSTOMERS BACK TO THE RETAILER FOR REPLACEMENT (EVEN IF THEY AR E WITHIN THE FIRST 30 DAYS OF PURCHASE).
·Enter the 15 digit Base ID Code, located on the underside of the Base Unit. The ID Code can include numbers (0-9 ) and characters (*,#). ·Press OK. The Handset will display: PLEASE WA IT! ·Wait approxim ately 15 seconds. The Handset will display FOUND BASE.
SET TIME PONER TIEMPO REGLER L'HEURE CLOCK MODE MODO RELOJ MODE HORLOGE REGISTER REGISTRAR REGISTRE RINGER VOLUME TIMBRE VOLUMEN SONNERIE VOLUME RINGER MELODY TIPO DE TIMBRE SONNERIE MELODIE VIBR.
FRENCH CALLS LOG GUEA DE LLAMADAS REGISTRE D'APPEL BASE SETTINGS CONFIG BASE REGLAGES BASE DISPLAY BASE-ID NUMERO DE BASE NUMERO DE BASE RINGER VOLUME TIMBRE VOLUMEN SONNERIE VOLUME RINGER MELODY.
3.Hold down [PAGE] key for 5 seconds. When the LINE IN USE light begins to flash, release the [PAGE] key. 4.The HANDSET CHARGING light will blink 5 times. W ithin 5 seconds from when it stops blinking, press [PAGE] once. VT2461 Mk1 DEREGISTER A SINGLE HANDSET 1.
- Advise the customer that you are sending him or her a brand new replacem ent set (Cordless 2230 or 2255 whichever the customer ha s). If the customer does not want the replacement, advise him or her to return th eir unit to the place of purchase. Stop! If the customer accepts the replacem ent 2230/2255 continue.
9.Hit "Ok". Now "line or Line In" should s how up in the master volume control for Recording. Please make sure that there is a check mark in the Sele ct box under the "Line or Line IN 10.Go to Options and Select Properties. 11.
of line voltage available at the phone and the distance of miles between the two other parties. Customer may consider 3-way calling se rvice (if available throug h local telco) as alternative. Customer is less likely to expe rience volume loss due to more direc t routing of conference.
This cordless operates in the 900 megahertz fr equency band. Radio signals in this band can penetrate small openings and reflect around obstructions more effciently than those of conventional cordless telephon es. This alows the unit to operate in areas that are typically difficult for cordless phones.
940101B2-7CPS2A (CRS will not accept a slash.) The battery save feature will deactiv ate the ri ng approxim ately 60 second s after being set. After 60 seconds, the phone will enter "sleep mode". The phone will not ring or d isplay "incoming call" when the extension phones ar e ringing.
·If possible advise your cal lers to leave a message. ·Check with the local telephone company and advise them 7-10 seconds of silence is required for the answering system to disconnect.
Calling in same Area Code Many LTCO's are changing their dialing sequence to 0 +, or 1 +, 10-di git dialing (0 + 0r 1 + area code + seven-digit phone number) for al l long distance calls that are made within the same area code. All 0 +, or 1 +, 7-dig it d ialing within the same area code will be eliminated.
5.Replace battery cover. 6.Recradle handset in base for 15 seconds. 7.Pick up handset and press phone. NOTE: Be sure batteries have been charged r ecently. If not, charge batteries fully for 16 hours. Common Cure If the unit does not seem to be responding normally, then try putting the handset in the base to reinitialize the unit.
To determine if telephones ring separately or together: 1.Remove telephones from line. 2.Replace one at a time. ·Line 1 has a higher pitched ring that helps differentiate it from the ring of Line 2. ·Have someone call on each line. ·Let the telephone ring approximately five times and listen to the difference.
. Ringer Equivalence On the bottom of each telephone or adjunct is a Ringer Equivalence. 1.Find this number for everything connected to your telephone line. 2.Add up all the numbers to get the total Ringer Equivalence. Julian Date NOTE: Contact the telephone company, if required.
22 Introduction....................................................................................................................1 Important Safety Instructions..................................................................................2 Getting Started.
1 Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product.
2 Important Safety Instructions F . If the product exhibits a distinct change in performance. 13. Avoid using a telephone (other than cordless) during an electrical storm. There is a remote risk of electric shock from lightning. 14. Do not use the telephone to report a gas leak in the vicinity of the leak.
3 Introduction EXPAND YOUR i 5858 or i 5871 SYSTEMS. YOUR BASE WILL WORK WITH UP TO 8 HANDSETS!!! IMPORTANT: The i 5808 is an accessory handset only for use with the i 5858 or i 5871 systems. You must have one of these base units in order to use the i 5808 accessory handset.
4 Getting St arted Parts Check List 6. User's Manual 7. VTech Phonebook Manager CD 8. Audio Patch Cable 9 USB Cable 1. Handset 2. Battery 3. Belt Clip 4. Handset Charger 5. Special Features Guide To purchase replacement batteries, visit us on the web at www.
5 Getting St arted Getting St arted The Handset Layout Getting St arted 1 2 3 5 6 4 7 9 10 11 13 8 12 1. Earpiece 2. USB Cable Jack 3. Headset Jack / Audio Patch Cable Jack (2.5mm) 4. On/Flash Key 5. Dialing Keys (0-9, *, #) 6. Speakerphone Key 7. LCD Display 8.
6 Getting St arted Setup Connecting Power to Handset Charger Because the i 5808 is an accessory handset to the i 5858 or i 5871 system, all you need to do is choose the location for your handset charger, and plug in the power supply into an electrical outlet.
7 Getting St arted Setup Getting St arted Battery Life A fully charged battery provides an average talk time of about seven hours or standby time of four days.
8 Getting St arted Registration Registering the i 5808 handset for the first time After charging the handset will display registration directions, which are as follows: • On the base unit, press MENU, t hen select REGISTER HANDSET. • When the base unit shows READY TO REGISTER NEW HANDSET, press REGISTER on the handset.
9 Basic Operation Handset Indicators Icon Handset Icons Description Mute Indicator • Flashes when the handset microphone is muted. Ringer Off Indicator • is displayed when the ringer is turned off.
10 Advance Operation Headset Operation Your i 5808 handset is equipped with a 2.5mm headset jack for use with an optional accessory headset for handsfree operation. If you choose to use the headset option, you must obtain an optional accessory headset, which is compatible with the i 5808 .
11 Additional Information Maintenance Taking care of your telephone Your cordless telephone contains sophisticated electronic parts, so it must be treated with care. Avoid rough treatment Place the Handset down gently. Save the original packing materials to protect your telephone if you ever need to ship it.
12 Additional Information In Case Of Difficulty If you have difficulty operating your phone, the suggestions below should solve the problem. If you still have difficulty after trying these suggestions, call VTech Communica- tions at 1-800-595-9511. In Canada, call VTech Telecommunications Canada Ltd.
13 Additional Information In Case Of Difficulty Your Handset vibrates or shakes when a call comes in • It is likely that your Vibrating Handset Ringer option has been set to ON . You hear other calls while using your phone • Disconnect your Base Unit from the telephone jack, and plug in a regular telephone.
14 Additional Information Warranty Statement What does this limited warranty cover? • The manufacturer of this VTech product, VTech Communications, warrants to the holder of a valid proof of purchas.
15 Additional Information Warranty Statement How do you get warranty service? • To obtain warranty service in the United States of America, call 1-800-595-9511 for instructions regarding where to return the Product. Before calling for service, please check the user’s manual.
16 Additional Information FCC, ACTA and IC Regulations FCC and ACTA Information If this equipment was approved for connection to the telephone network prior to July 23, 2001, it complies with Part 68 .
17 Additional Information FCC, ACTA and IC Regulations rules. If the equipment was approved after that date, it complies with the Part 68 rules and with Technical Requirements for Connection of Equipment to the Telephone Network adopted by the Administrative Council for Terminal Attachments (ACTA).
18 Additional Information FCC, ACTA and IC Regulations 5. Hearing aid compatibility If this product is equipped with a corded or cordless handset, it is hearing aid compatible.
19 Additional Information FCC, ACTA and IC Regulations Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together.
20 Additional Information Technical Specifications FREQUENCY CONTROL Crystal controlled PLL synthesizer TRANSMIT FREQUENCY Base: 5725-5850 MHz Handset: 5725-5850 MHz RECEIVE FREQUENCY Base: 5725-5850 MHz Handset: 5725-5850 MHz CHANNELS 95 Channels SIZE Handset: 190mm x 42mm x 31mm Charger: 87.
91-000xxx-010-000 ISSUE 0 VTECH TELECOMMUNICATIONS LTD. A member of THE VTECH GROUP OF COMPANIES. Distributed in the U.S.A. by VTech Communications Inc., Beaverton, Oregon, 97008 Distributed in Canada by VTech Telecommunications Canada Ltd., 7671 Alderbridge Way, Richmond, B.
Congratulations on your purchase of this VTech product NEED HELP? Our representatives are here to help you with any questions concerning the operation of this product, available accessories, or any other related issues. Call Toll Free: 1-800-595-9511 In Canada, Call: 1-800-267-7377 or visit our website at www.
An important point after buying a device VTech I5808 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought VTech I5808 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data VTech I5808 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, VTech I5808 you will learn all the available features of the product, as well as information on its operation. The information that you get VTech I5808 will certainly help you make a decision on the purchase.
If you already are a holder of VTech I5808, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime VTech I5808.
However, one of the most important roles played by the user manual is to help in solving problems with VTech I5808. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device VTech I5808 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center