Instruction/ maintenance manual of the product Cordless Telephone VTech
Go to page of 47
1 Congratulations on your purchase of this VTech product NEED HELP? Our representatives are here to help you with any questions concerning the operation of this product, available accessories, or any other related issues. Call Toll Free: 1-800-595-9511 In Canada, Call: 1-800-267-7377 or visit our website at www.
2 When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product.
3 Important Safety Instructions 13. Avoid using a telephone (other than cordless) during an electrical storm. There is a remote risk of electric shock from lightning.
4 Enhanced 2.4GHz Technology - Dual band transmission combines the best of 2.4GHz and 900MHz technologies, providing enhanced performance over stan- dard cordless telephones.
5 1. Base Unit 2. Handsets 3. Handset Charger 4. Base AC Power Adaptor 5. Telephone Line Cord 6. Batteries 7. Belt Clips 8. User’s Manual 9. Charger AC Power Adaptor 10. Base Wall Mounting Bracket To purchase replacement batteries, visit us on the web at www.
6 2 3 4 5 6 7 8 9 1 10 11 12 13 14 1. Antenna 2. Earpiece 3 . LCD 4. up and down Arrow Keys 5. Hold Key 6. Dialing Keys (0-9,*,#) 7. Chan/Delete Key 8 . Microphone 9. Headset Jack 10. Sel/X-FER Key 11 . Off Key 12. Phone/flash Key 13. Redial/Pause Key 14.
7 TEL LINE 9V DC HAC FCC ID: EW780-5298-B00 MODEL: 2450 VTECH TELECOMMUNICATIONS L TD. MANUFACTURED IN CHINA COMPLIES WITH 47 CFR PART 68 REGISTRATION NO.: US: EW7W901B24280 RINGER EQUIVALENCE: 0.1B USOC JACK: RJ11C, RJ11W THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
8 Getting Started a c Before You Install 1. Choose a location for the base near an electrical outlet and a telephone jack. This phone requires a modular telephone jack and a standard electri- cal outlet (110v AC) not controlled by a wall switch. 2. Install the handset battery.
9 Getting Started TEL LINE 9V DC VTECH TELECOMMUNICATIONS LTD. DC 9V 300mA CLASS 2 POWER SOURCE ONLY CORDLESS TELEPHONE VTech Customer Service 1-800-595-9511 www.vtechphones.com Installation Connect the power cord. Connect the telephone line cord Table/Desk Installation 1.
10 Getting Started Installation Your t 2450 base unit is designed to mount on a standard telephone wall plate. Wall mounting is optional. 1. Open the hinged wall mount bracket on the underside of the base, then swivel it down and lock it into place as shown in the diagram above.
11 Basic Operation Telephone Operation End a Call Press OFF -OR- Place handset in base or chager. Exit Programming Cancel a page Channel Switch to a clear channel while on a call. Delete While handset is idle, press and hold to delete all records in call log.
12 Basic Operation Telephone Operation Page Press to page the handset for up to 60 seconds. Press again or, press OFF on handset or place handset in base or charger to cancel the page. In Use/Charging • Flashes in unison with the ring of an in- coming call.
13 Basic Operation Handset Ringer Style/Battery Save You can select from four different handset ringer styles, or turn the ringer off and extend the battery life. 1. Make sure the handset is idle. 2. Press PROG . 3. Press until the screen displays RINGER: and the current setting.
14 Basic Operation Telephone Operation ** RINGING ** ** RINGING ** ** RINGING ** ** RINGING ** ** RINGING ** CONNECTING... CONNECTING... CONNECTING... CONNECTING... CONNECTING... PHONE ON PHONE ON PHONE ON PHONE ON PHONE ON SCANNING... SCANNING... SCANNING.
15 Basic Operation You can store up to nine telephone numbers with names (up to 15 characters, 24 digits each location) you dial frequently into the speed dial memory locations you assign (1-9) in each handset. These numbers can be dialed only by pressing two buttons.
16 Basic Operation Telephone Memory 3. Press SELECT . The screen displays ERASE NO YES and the number. The current choice flashes. 4. Press until YES flashes. 5. Press SELECT . You will hear a confirmation beep. Dial a Memory Number 1. Press and hold the memory location key (1-9) of the entry you wish to dial.
17 Basic Operation Reassign Locations in Memory 1. Press and hold the memory location key (1-9) of the entry you wish to reassign. 2. When the screen displays the entry you want to reassign, press SELECT . Then press until SPEED flashes. Telephone Memory 3.
18 Basic Operation Your t 2450 can store 30 (including the nine speed dial entries) telephone numbers with names (up to 15 characters for the name and 24 digits for the number in each location) in each handset. NOTE: Press OFF at any time to exit the directory.
19 Basic Operation to alert you that the calls from this number by changing to a distinctive ringer after the first ring. Choose N for a normal ringer. 8. Press SELECT or PROG to confirm your selection. If you chose Y in Step 7 , a D will be displayed with the directory entry.
20 Basic Operation Telephone Directory Move a Number/Name to the Memory 1. Press ( DIR ). The screen displays DIRECTORY . 2. Press or to scroll alphabetically through entries stored in directory. — O R — Press the dial pad key for the first letter of the entry you want to move.
21 Basic Operation About Call History (Caller ID) Y our t 2450 can store up to 90 calls in its caller ID memory. When the memory is full, the oldest call will be deleted to make room for new incoming call information.
22 Basic Operation Caller ID Operation Dial a Displayed Number 1 . Locate the record in call history that you want to dial. 2. If you wish to change how the number is dialed, press # . The screen displays any alternate dialing sequences available for this call (area code + number; 1 + area code + number; number only; 1+ number).
23 Basic Operation Store a Call History Record in the Directory 1. Locate the record in the call history you want to store in the directory. 2. If you wish to change how the number is stored, press # . The screen displays any alternate dialing sequences available for this call (area code + number; 1 + area code + number; number only; 1+ number).
24 Basic Operation Audible Indicators Your t 2450 gives you voice prompts for feature operations and voice confirmations when you press a button or complete an operation. Setting the Clock 1. Make sure the answering system is ON . 2. Press TIME/SET . The system announces the clock setting, then announces: “ To Set Day and Time, press TIME/SET .
25 Basic Operation Record Your Announcement NOTE: If you have assigned different mailboxes to different people, be sure to tell callers in your announcement to press 1 , 2 , or 3 to leave a message in the appropriate mailbox. For example: “Thank you for calling.
26 Basic Operation “ Set Audible Message Alert ” When message alert is turned on, the base beeps Off * once every 10 seconds when new messages On have been received. “Set Announce Only” When you turn Announce Only On , callers hear Off * your announcement, but cannot leave a message.
27 Basic Operation Listen to, Save & Delete Messages The system automatically saves your messages until you delete them, and can store approximately 15 minutes of messages, memos, and announcements (up to a maximum of 99 messages). Your caller can leave a message of up to four minutes in length.
28 Basic Operation Call Screening/Intercept 1. Make sure the answering system is ON , and set the message playback volume is set above level one so you can hear the caller’s message. 2. If you decide to take the call, press PHONE on the handset. 3 .
29 Basic Operation Play messages in Press # , then the appropriate mailbox a mailbox number (1, 2 or 3). The system plays new messages. If there are no new messages, the system plays old messages. Repeat a message Press #4 while message is playing; press #4#4 to back up to previous message.
30 Basic Operation Remote Access Commands (continued) Function: Command: Turn system off Turn system on NOTE: If no key is pressed within 10 seconds of entering remote access, the voice menu will be announced. After the voice menu announcement, if no key is pressed within 20 seconds, the remote access call will automatically end.
31 Basic Operation 1 3 4 Battery Care and Maintenance • This battery should remain charged up to seven days with the ringer turned on and up to no limited with the ringer off. A fully charged battery provides an average talk time of about six hours.
32 Basic Operation Headset Jack You can use this telephone handsfree when you install any VTech 2.5mm headset, purchased separately. Plug the headset into the jack located on the right side of the handset (under the small rubber flap). Do not force the connection, but make sure the plug fits securely.
33 Additional Information If you have difficulties in operating your phone, the suggestions below should solve the problem. If you still have difficulties after trying these suggestions, call VTech Communications at 1-800-595-9511. In Canada, call VTech Telecom- munications Canada Ltd.
34 Additional Information You hear noise in the handset, and none of the keys or buttons work • Make sure the power cord is plugged in. Common cure for electronic equipment If the unit does not seem to be responding normally, then try putting the handset in its base.
35 Additional Information Taking Care Of Your Telephone Your cordless telephone contains sophisticated electronic parts, so it must be treated with care. Avoid rough treatment Place the handset down gently. Save the original packing materials to protect your telephone if you ever need to ship it.
36 Additional Information What does this limited warranty cover? • The manufacturer of this VTech product, VTech Communications, warrants to the holder of a valid proof of purchase (“Consumer” o.
37 Additional Information but not limited to Products used for rental purposes); or 7. Product returned without valid proof of purchase (see 2 below); or 8. Charges for installation or set up, adjustment of customer controls and instal- lation or repair of systems outside the unit.
38 Additional Information Warranty Statement not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
39 Additional Information FCC, ACTA and IC Regulations This equipment complies with Parts 15 of the Federal Communications Com- mission (FCC) rules for the United States. It also complies with regulations RSS210 and CS-03 of Industry and Science Canada.
40 Additional Information 1 . Product identifier and REN information The label on the back or bottom of this equipment contains, among other things, an identifier indicating product approval and the Ringer Equivalence Number (REN). This information must be provided to your local telephone company up on request.
41 Additional Information 5. Hearing aid compatibility If this product is equipped with a corded or cordless handset, it is hearing aid compatible. 6 .
42 Additional Information FCC, ACTA and IC Regulations Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier.
43 Additional Information The RBRC ® Seal on the nickel-cadmium battery indicates that VTech Communications, Inc. is voluntarily participating in an in- dustry program to collect and recycle these batteries at the end of their useful lives, when taken out of service within the United States and Canada.
44 Additional Information Technical Specifications FREQUENCY CONTROL Crystal controlled PLL synthesizer TRANSMIT FREQUENCY Base: 2410.2 - 2418.9 MHz Handset: 912.75 - 917.10 MHz RECEIVE FREQUENCY Base: 912.75 - 917.10 MHz Handset: 2410.2 - 2418.9 MHz CHANNELS 30 Channels NOMINAL EFFECTIVE RANGE Maximum power allowed by FCC and IC.
Important Safety Instructions.................................................................2 Before You Begin............................................................................................................... 4 Parts Check List.........
Call Screening/Intercept ................................................................................28 Record a Memo ............................................................................................. ...28 Message Window Display ......
91-000171-030-000 ISSUED 0 VTECH TELECOMMUNICATIONS LTD. Distributed in the U.S.A. by VTech Communications, Inc. Beaverton, Oregon, 97008 Distributed in Canada by VTech Telecommunications Canada Ltd. 200-7671 Alderbridge Way, Richmond, B.C. V6X 1Z9. Copyright 2004 for VTECH TELECOMMUNICATIONS LTD.
An important point after buying a device VTech Cordless Telephone (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought VTech Cordless Telephone yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data VTech Cordless Telephone - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, VTech Cordless Telephone you will learn all the available features of the product, as well as information on its operation. The information that you get VTech Cordless Telephone will certainly help you make a decision on the purchase.
If you already are a holder of VTech Cordless Telephone, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime VTech Cordless Telephone.
However, one of the most important roles played by the user manual is to help in solving problems with VTech Cordless Telephone. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device VTech Cordless Telephone along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
