Instruction/ maintenance manual of the product VEC080 Vizio
Go to page of 10
OWNER’S MANUAL AND W ARRANTY INFORMA TION THIS MANUAL CONT AINS IMPORT ANT INFORMA TION REGARDING SAFETY , OPERA TION, MAINTENANCE AND STORAGE OF THIS PRODUCT . READ CAREFULL Y BEFORE USE, AND RET AIN FOR FUTURE REFERENCE. 4140 S.W . 28th W ay , Ft.
1 IMPORT ANT SAFETY INSTRUCTIONS W ARNING - RISK OF EXPLOSIVE GASES 1. WORKING IN VICINITY OF A LEAD-ACID BA TTERY IS DANGEROUS. BA TTER- IES GENERA TE EXPLOSIVE GASES DURING NORMAL BA TTERY OPERA TION. FOR THIS REASON, IT IS OF UTMOST IMPORT ANCE THA T EACH TIME BEFORE USING YOUR CHARGER, YOU READ THIS MANUAL AND FOLLOW THE INSTRUCTIONS EXACTL Y .
2 PERSONAL PRECAUTIONS SAFETY 1. Another person should be within range of your voice or close enough to come to your aid when you work near a lead-acid batter y . 2. Fresh water and soap should be nearby in case batter y acid contacts skin, cloth- ing, or eyes.
3 CHARGER LOCA TION 1. Locate charger as far away from batter y as cables permit. 2. NEVER place charger directly above batter y being charged; gases from batter y will corrode and damage charger . 3. NEVER allow batter y acid to drip on charger when reading specific gravity or fill- ing batter y .
4 INTRODUCTION Thank you for selecting the V ector Batter y Charger (VEC080). With proper care and use, it will give you years of dependable ser vice. Please read and obser ve all safety warnings and cautions and this entire user’ s manual, before installing or using this device.
Batter y Harness Clips Batter y T erminal Rings DC Accessor y Plug Accessor y Outlet 1/2 Amp Batter y Charger Batter y Batter y Cables FIGURE 1. 2 Amp Batter y Charger Connection Diagram 110/120 V olt.
NOTE: AL W A YS disconnect the AC power cord from the AC power outlet before con- necting (or disconnecting) the charger to (or from) the batter y . CONN E CTING THE CHARGER WITH TERMINAL RINGS The charger’ s output leads have crimped, color-coded ring terminals (Figure 4) (RED-POSITIVE and BLACK- NEGA TIVE).
7 CONNECTING THE CHARGER WITH THE DC ACCESSOR Y PLUG The charger’ s output leads also contain a DC acces- sor y plug (Figure 5). 1. Plug DC plug into vehicle’ s DC accessor y outlet. 2. Plug the AC plug of the charger into any stan- dard 110/120 volt AC wall outlet.
8 TROUBLESHOOTING NOTE: Ensure that all installa tion and operating instructions and safety precautions are understood and carefully followed by anyone installing or using the charger .
9 2 YEAR LIMITED W ARRANTY PROGRAM This limited warranty program is the only one that applies to this product, and it sets forth all the responsibilities of V ector Manufacturing, Ltd., regarding this product. There is no other warranty , other than those described herein.
An important point after buying a device Vizio VEC080 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vizio VEC080 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vizio VEC080 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vizio VEC080 you will learn all the available features of the product, as well as information on its operation. The information that you get Vizio VEC080 will certainly help you make a decision on the purchase.
If you already are a holder of Vizio VEC080, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vizio VEC080.
However, one of the most important roles played by the user manual is to help in solving problems with Vizio VEC080. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vizio VEC080 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
