Instruction/ maintenance manual of the product PHONO 1 Bel Canto Design
Go to page of 8
Bel Canto Design PHONO 1 Low Noise Solid State Phono Preamplifier User's Guide and Operating Information Bel Canto Design • 212 Third Avenue North – Suite 345 • Minneapolis, MN 55401 Phone: (612) 317.4550 • Fax: (612) 359.9358 • Email: Info@BelCantoDesign.
Page 2 PHONO Owner's Manual Low Noise Solid State Phono1 Preamplifier The Bel Canto Design’s P HONO1 components are selected for high sound quality, precision, technical virtue, and material quality. Bel Canto’s circuit designs and component quality will provide superb performance and years of listening satisfaction.
PHONO Owner's Manual Page 3 Bel Canto Design grew from the quest to achieve the ultimate musical satisfaction from an audio system. This quest began with the discovery of the inherent sonic qualities and musical performance potential of a nearly forgotten technology, the single-ended triode amplifier.
Page 4 PHONO Owner's Manual Design Features A classic architecture had been chosen to provide a firm foundation for the RIAA equalization and gain stages of the Phono1.
PHONO Owner's Manual Page 5 Unpacking Unpacking The box containing your Phono1 contains the following parts: 1 - Phono1 User's Guide 1 - Power Cable for connection to utility power [1.
Page 6 PHONO Owner's Manual Gain Settings, Initial Setup, and Placement • Gain Settings Internal jumpers accommodate Moving Magnet, Moving Coil (Low Gain), and Moving Coil (High Gain) settings. The Phono1 is shipped from the factory set for Moving Magnet operation.
PHONO Owner's Manual Page 7 DIP switch setting BLANK = UP, X = DOWN Cartridge 50 100 500 1 k 10 k Load(ohms) 50000 8333 x 980 x 893 x x 495 x 472 x x 331 x x 321 x x x 100 x 99 x x 91 x x 90 x x .
Page 8 PHONO Owner's Manual Specifications RIAA accuracy Into >20K Ohms • 20 Hz-20 kHz +/- 0.25 dB Signal to Noise Ratio • > 75 dB A weighted MM/MC Distortion at 3 Volts RMS out • <0.
An important point after buying a device Bel Canto Design PHONO 1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bel Canto Design PHONO 1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bel Canto Design PHONO 1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bel Canto Design PHONO 1 you will learn all the available features of the product, as well as information on its operation. The information that you get Bel Canto Design PHONO 1 will certainly help you make a decision on the purchase.
If you already are a holder of Bel Canto Design PHONO 1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bel Canto Design PHONO 1.
However, one of the most important roles played by the user manual is to help in solving problems with Bel Canto Design PHONO 1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bel Canto Design PHONO 1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
