Instruction/ maintenance manual of the product WMY 8046 LB2 Beko
Go to page of 27
2820524401/ 25-11-14.(10:36) WMY 8046 LB2 W ashing Machine User’ s Manual Document Number.
This product w as manufactured using the la test technology in environmentally friendly conditions..
3 / EN Washing Machine / User’ s Manual 1 General safety instructions This section includes security instructions which may help prevent the injuries and material damage risks. All kinds of warranties shall be invalid if these instructions are not observed.
4 / EN Washing Machine / User’ s Manual u Do not f orget to close the loading door when leaving the room where the product is located. u store all detergents and additives in a safe place awa y from the reach of the children by closing the cover of the detergent container or sealing the detergent package.
5 / EN Washing Machine / User’ s Manual 2 Important instructions for environment 2.1 Compliance with WEEE Directive This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE).
6 / EN Washing Machine / User’ s Manual 4 T echnical specifications Supplier name or trademark Beko Model name WMY 8046 LB2 Rated capacity (kg) 8 Energy efficiency class / Scale from A (Highest Efficiency) to D (Lowest Efficiency) A+++ Maximum spin speed (rpm) 1400 Height (cm) 84 Width (cm) 60 Depth (cm) 60 Net weight (±4 kg.
7 / EN Washing Machine / User’ s Manual 4.1 Installation • Apply to the nearest authorized ser vice agent for the installation of your product. • Preparation of the location and electrical, tap water and waste water installations at the place of installation is under customer's responsibility .
8 / EN Washing Machine / User’ s Manual 4.1.4 Connecting water supply C The water supply pressure required to run the product is between 1 to 10 bars (0.1 – 1 MPa). It is necessary to have 10 – 80 liters of water flowing from the fully open tap in one minute to have your machine run smoothly.
9 / EN Washing Machine / User’ s Manual 4.1.6 Adjusting the feet A CAUTION: In order to ensure that the product operates more silently and vibration-free, it must stand level and balanced on its feet. Balance the machine by adjusting the feet. Otherwise, the product may move from its place and cause crushing and vibration problems.
10 / EN Washing Machine / User’ s Manual 4.2 Preparation 4.2.1 Sorting the laundry * Sort laundry according to type of fabric, color , and degree of soiling and allowable water temperature. * Always obey the instructions given on the garment tags. 4.
11 / EN Washing Machine / User’ s Manual 4.2.6 Using detergent and softener C When using detergent, softener , starch, fabric dye, bleacher and decolorant, descaling agents; read the manufacturer's instructions written on the package and follow the dosages specified.
12 / EN Washing Machine / User’ s Manual If the product does not contain a liquid detergent cup: • Do not use liquid detergent for the prewash in a programme with prewash. • Liquid detergent stains your clothes when used with Delayed Start function.
13 / EN Washing Machine / User’ s Manual 4.2.7 Tips for efficient washing Clothes Light Colours and Whites Colours Black/Dark Colours Delicates/ Woolens/Silks (Recommended temperature range based on.
14 / EN Washing Machine / User’ s Manual 4.3 Operating the product 4.3.1 Control panel 1 - Programme selection knob 2 - T emperature selection LEDs 3 - Spin speed selection LEDs 4 - Duration informa.
15 / EN Washing Machine / User’ s Manual 4.3.2 Programme selection 1 Determine the programme suitable for the type, quantity and soiling level of the laundr y in accordance with the "Programme and consumption table". 1 Select the desired programme with the “Programme Selection” knob.
16 / EN Washing Machine / User’ s Manual Indicative values for Synthetics programmes (EN) Load (kg) W ater Consumption (l) Energy Consumption (kWh) Programme Duration (min) * Remaining Moisture Content (%) ** Remaining Moisture Content (%) ** ≤ 1000 rpm > 1000 rpm Synthetics 60 4 65 1.
17 / EN Washing Machine / User’ s Manual 4.3.6 Programme and consumption table • : Selectable. * : Automatically selected, no canceling. ** : Energ y Label programme (AS/NZS 2040) *** : If maximum spin speed of the machine is lower then this value, you can only select up to the maximum spin speed.
18 / EN Washing Machine / User’ s Manual 4.3.7 Auxiliary function selection Select the desired auxiliary functions before starting the programme. Whenever a programme is selected, if a relevant auxiliary function is selected its related indicator light will illuminate.
19 / EN Washing Machine / User’ s Manual 4.3.8 End Time With the End Time function, the startup of the programme may be delayed up to 24 hours. After pressing End Time button, the programme's estimated ending time is displayed. If the End Time is adjusted, End T ime indicator is illuminated.
20 / EN Washing Machine / User’ s Manual 4.3.11.3 Adding or taking out laundry 1. Press the Start / Pause button to switch the machine to pause mode. The programme follow-up light of the relevant step during which the machine was switched into the pause mode will flash.
21 / EN Washing Machine / User’ s Manual 4.4 Maintenance and cleaning Service life of product extends and frequently experienced problems will be reduced if it is cleaned at regular intervals.
22 / EN Washing Machine / User’ s Manual 4.4.3 Cleaning the body and control panel Wipe the body of the machine with soapy water or non-corrosive mild gel detergents as necessar y , and dry with a soft cloth. Use only a soft and damp cloth to clean the control panel.
23 / EN Washing Machine / User’ s Manual If the product does not have an emergency water drain hose, in order to drain the water: a. In order to collect the water to flow out of the filter , place a large vessel in front of the filter . b. T urn and loosen the pump filter until wa ter starts to flow (counterclockwise).
24 / EN Washing Machine / User’ s Manual 5 T roubleshooting Problem Reason Solution Program does not start after closing the door . Start / Pause / Cancel button was not pressed. *Press the Start / Pause / Cancel button. Programme cannot be started or selected.
25 / EN Washing Machine / User’ s Manual Problem Reason Solution Programme time does not countdown. (On models with display) (*) Timer may stop during water intake. Timer indicator will not countdown until the machine takes in adequate amount of water .
26 / EN Washing Machine / User’ s Manual Problem Reason Solution It does not rinse well. The amount, brand and storage conditions of the detergent used are inappropriate.
27 / EN Washing Machine / User’ s Manual Problem Reason Solution (*) Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its surrounding environment. Laundry should be rearranged and re-spun.
An important point after buying a device Beko WMY 8046 LB2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Beko WMY 8046 LB2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Beko WMY 8046 LB2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Beko WMY 8046 LB2 you will learn all the available features of the product, as well as information on its operation. The information that you get Beko WMY 8046 LB2 will certainly help you make a decision on the purchase.
If you already are a holder of Beko WMY 8046 LB2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Beko WMY 8046 LB2.
However, one of the most important roles played by the user manual is to help in solving problems with Beko WMY 8046 LB2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Beko WMY 8046 LB2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
