Instruction/ maintenance manual of the product DP1011 Visioneer
Go to page of 36
Xer o x DP1011 user’ s guide.
Xero x DP1011 pr ojector user’ s guide.
C opyr i g h t © 2003 Vi s i oneer , I nc. Reproduction, adaptation, or translation without pri or written permission is proh ibited, except as allowed un der the copyright laws. Xerox ®, the digital X ® are registered trademarks of Xerox Corporation in the Un ited St ates and/or other countrie s and are used under license.
FCC Radio Frequency Interference S t atement This equipment has b een tested and found to comply with the limit s for the class B digit al device, pursuant to p art 15 of the FCC Rules. These limi t s are designed to provide rea sonable protection against interference in a residential inst allation.
Xerox DP1011 User’s Guide iv T able of Content s Welcome Precautions Do’s and Don’ts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 What’s in the Box . . . .
Xerox DP1011 User’s Guide 1 We l c o m e Y our new Xe rox DP101 1 projector is an XGA single chip 0.7” DLP™ (Digital Light Processing) projector with these outstand ing features: • T rue XGA, 1024 x 768 addressable pixels • 2.1 lbs (0.95 kgs) compact d esign • Single chip DLP™ te chnology • Compatible with NTSC, NTSC4.
Xerox DP1011 User’s Guide 2 Precautions Precautions Follow all warnings, precaut ions and mainten ance as recommended in this user’s guide to avoid injury and to maximize the life of your projector . W arning— Do not look into the projector’s lens when the lamp is on.
Xerox DP1011 User’s Guide 3 Precautions Do’ s and Don’t s Do: • T urn of f the projector before cleaning. • Use a sof t cloth moistened with mild detergent to clean the display housing. • Disconnect the power plug from AC outlet if the projector is not being used for a long period of time.
Xerox DP1011 User’s Guide 4 Precautions What’ s in the Box Before proceeding, check the contents of th e box. If items are missing or damaged, cont act the dealer where you purchased the projector .
Xerox DP1011 User’s Guide 5 Precautions The Xerox DP101 1 Projector Focus Ring —Rot ate to focus the image. Zoom Ring —Rotate to zoom the imag e in or out. Elevator Button —Press to release the elevator foot to lower or raise the projector . Zoom Lens —Extends and retract s as you rotate the zoom ring to zoom in/out.
Xerox DP1011 User’s Guide 6 Precautions Connection Port s Power Connector —Plug the powe r cord into the projector here. VGA Connector —Use the VGA cable that you received with you r projector to plug in a computer , HDTV , or component video source.
Xerox DP1011 User’s Guide 7 Installation Inst allation Connecting the Projector 1. Make sure the projector and computer are turned of f. 2. Connect one end of the VGA ca ble to the projector . Connect the other end to the VGA port on t he computer .
Xerox DP1011 User’s Guide 8 Installation Powering On/Off the Projector T o turn on the projector power 1. Remove the lens cap. 2. Make sure that the power cord and the cables from the video sources are securely connected to the pro jector . 3. T urn on the lamp by pressing the Power button on the control panel or on the Remote Contr ol.
Xerox DP1011 User’s Guide 9 Installation T o turn off the projector power 1. Press the Power button on the p rojector or Remote Control to turn off t he projector lamp. An on-screen message appears: Power off the lamp? 2. Press the Power button again to confirm.
Xerox DP1011 User’s Guide 10 Installation Adjusting the Projected Image T o raise the projector 1. Lift the projector up an d press the elevator button.
Xerox DP1011 User’s Guide 11 Installation Adjusting the Projector Zoom/Focus Y ou adjust the focus and zoom in / out with the focus ring and zoom ring on the lens housing. T o focus the image, rot ate the focus ring until the image is clear . The projector can focus at distances from 3.
Xerox DP1011 User’s Guide 12 User Controls User Controls Panel Control and Remote Control The buttons on the Panel Contro l and the Remote Control are for controlling the projector ’s functions. Panel Control Power/St andby Indicator —Flashes green during power startup ; remains steady green wh en projector is ready .
Xerox DP1011 User’s Guide 13 User Controls Remote Control T ransmit Indicator Light —Indicates the in frared signal that is transmitted to, and received by t he projector . PiP —Displays the Pip menu of the On-Screen Display (OSD). Source —Selects type of video source: RGB, Compone nt-p, Component-i, S-Vi deo, Composite Video, or HDT V .
Xerox DP1011 User’s Guide 14 User Controls On-Screen Display (OSD) Menus The On-Screen Display (OSD) menus provide th e options to make image adjustment s and change a variety of settings. The projecto r automatically detects the video source so your selections from the menus will apply to that source.
Xerox DP1011 User’s Guide 15 User Controls Choose a Language 1. Press the Menu button on the Remote Control or Panel Control to open the OSD. 2. Select the Language menu and pre ss the Enter button. The Language menu appears. 3. Use the keys to select the la nguage you want.
Xerox DP1011 User’s Guide 16 User Controls Adjust the Projector Image 1. Press the Menu button on the Remote Control or Panel Control to open the OSD. 2. Select the All Images menu a nd press the Enter button. The All Images menu appears. 3. Use the keys to select the item you want, and use the keys to adjust the selected setting.
Xerox DP1011 User’s Guide 17 User Controls Adjust the Computer Image 1. Press the Menu button on the Remote Control or Panel Control to open the OSD. 2. Select the Computer Image menu and pre ss the Enter button. The Computer Image menu ap pears. 3.
Xerox DP1011 User’s Guide 18 User Controls Adjust the V ideo Image 1. Press the Menu button on the Remote Control or Panel Control to open the OSD. 2. Select the V ideo Image menu and press the Enter button. The Vide o Image menu appears. 3. Use the keys to select the item you want, and use the keys to adjust the selected setting.
Xerox DP1011 User’s Guide 19 User Controls Projector Management 1. Press the Menu button on the Remote Control or Panel Control to open the OSD. 2. Select the Management menu and pre ss the Enter button. The Management menu appears. 3. Use the keys to select the item you want, and use the keys to adjust the selected setting.
Xerox DP1011 User’s Guide 20 User Controls Adjust the PiP (Picture in Picture) 1. Press the Menu button on the Remote Control or Panel Control to open the OSD. 2. Select the PiP menu and press the Enter button. The PiP menu appears. 3. Use the keys to select the item you want, and use the keys to adjust the selected setting.
Xerox DP1011 User’s Guide 21 Maintenance Maintenance Changing the Lamp The projector ’s lamp life is approximate ly 1500 hours of use. The projector automatically monitors the la mp life. After 1500 hours o f use, the projector displays the message: The Lamp has been in use for over 1500 hours.
Xerox DP1011 User’s Guide 22 Maintenance 4. Remove the cover . 5. Remove the two screws from the lamp module. 6. Lift up the handle and pull out the lamp module.
Xerox DP1011 User’s Guide 23 Maintenance T roubleshooting If you try the troubleshooting proc edures described in this section and the problem persist s, you may have a malfunctioning projector . Refer to the technical su pport card that you received with your projector or contact t he retailer where you purch ased your projector .
Xerox DP1011 User’s Guide 24 Maintenance For Windows 95, 98, 2000, XP: 1. From the Windows S tart menu, select Settings/Control Panel and then double-click the Display icon. 2. Select the Setting t ab. The Desktop Area shows the resolution setting. 3.
Xerox DP1011 User’s Guide 25 Maintenance Problem: The image is flicke ring or otherwise unst able T ry one of these possible solutions: • On the On-screen display , go to the Computer Mode p age and select T racking. Change the tracking until the image stabilizes.
Xerox DP1011 User’s Guide 26 Maintenance Problem: Image is reversed. On the On-screen display , go to the Computer/Video Mode/ Management p age and select Projection Direction. Change the direction of projection to display the image properly . Problem: Lamp burns ou t or make a popping sound.
Xerox DP1011 User’s Guide 27 Maintenance Xerox DP101 1 Projector Specifications Lamp V alve Single Chip DLP™ (Digital Ligh t Processing) T echnology Lamp 120W user-replaceable P_VIP lamp Number of Pixels 1024 pixels (horizontal) by 768 lines (ve rtical) Displayable Colors 16.
Xerox DP1011 User’s Guide 28 Maintenance Setting the Screen Resolution For best viewing on your computer screen, it s resolution should be set to 1024 x 768 or less. T o reset the scree n resolution, follow the steps below , referring to the chart on page 29 for the correct settings for your type of co mputer and monitor .
Xerox DP1011 User’s Guide 29 Maintenance Comp atibility Modes—Windows Computers * Compression computer image. Mode Resolution (Analog) V . Frequen cy (Hz) H. Frequency (Hz) VESA VGA 640 x 350 70 31.5 VESA VGA 640 x 350 85 37.9 VESA VGA 640 x 400 85 37.
Xerox DP1011 User’s Guide 30 Maintenance Comp atibility Modes—Macintosh Compu ters * Compression computer image. Mode Resolution (Analog) V . Frequen cy (Hz) H. Frequency (Hz) MAC 16”* 832 x 624 74.55 49.725 MAC 19”* 1024 x 768 75 60.24 MAC* 1 152 x 670 75.
05-0600-000.
An important point after buying a device Visioneer DP1011 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Visioneer DP1011 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Visioneer DP1011 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Visioneer DP1011 you will learn all the available features of the product, as well as information on its operation. The information that you get Visioneer DP1011 will certainly help you make a decision on the purchase.
If you already are a holder of Visioneer DP1011, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Visioneer DP1011.
However, one of the most important roles played by the user manual is to help in solving problems with Visioneer DP1011. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Visioneer DP1011 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
