Instruction/ maintenance manual of the product X6600HRT/DA Vision Fitness
Go to page of 8
Guide Assembly X6600HR T/DA DUAL-ACTION ELLIPTICAL TRAINER.
T o avoid possible damage to this Elliptical T rainer , please follow these assembly steps in the correct order . Before proceeding though, find your new Elliptical T rainer’ s serial number located.
5 MM Allen Wrench Screwdriver 6 MM L-Shaped Wrench TOOLS & P AR TS INCLUDED P AR TS BOX Heart Rate Chest Strap, Qty: 1 Power Supply , Qty: 1 Arm Bracket Covers, Qty: 2 Logo Endcaps, Qty: 2 Stabili.
BLUE BAG ORANGE BAG PINK BAG HARDW ARE INCLUDED M8 x 75 MM Bolt Quantity: 2 M4 x 12 MM Screw Quantity: 4 M3 x 10 MM Screw Quantity: 1 M4 x 12 MM Screw Quantity: 4 M8 Arc W asher Quantity: 4 M8 x 12 MM.
5 1 STEP 2 STEP 1 STEP • Install the left and right stabilizers with the four arc-shaped washers (M8) and four bolts (M8 x 20), using the Blue 5 MM Allen wrench. • Cover both stabilizers with the included rubber boots. ORANGE BAG 2 STEP • Slide the console mast cover onto the console mast.
6 3 STEP • Slide a small spring washer (M20) onto the lower pedal arm support, followed by the right lower arm. Attach with a white T eflon washer (M30), a flat washer (M30), and bolt (M8 x 12), using Blue-han- dled 5 MM Allen wrench. • Pivot the lower arm and inser t the top end into the upper handlebar bracket.
7 4 STEP • Slide right upper arm into right upper handlebar bracket. • Tighten the top bolt (M8) on the arm bracket connection block, using the 6 MM L-shaped Allen wrench. • Attach plastic arm bracket cover to the front of the arm bracket connection block.
8 621-D East Lake Street • P .O. Box 280 • Lake Mills. WI 53551 toll free 1.800.335.4348 • phone 1.920.648.4090 • fax 1.920.648.3373 www .visionfitness.com 2001 Vision Fitness. All Rights Reserved. 3.01 Part #Z66EP09-AG1803PRD AG18.03PRD REV1 5 STEP • Remove the four screws from the back of the console.
An important point after buying a device Vision Fitness X6600HRT/DA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vision Fitness X6600HRT/DA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vision Fitness X6600HRT/DA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vision Fitness X6600HRT/DA you will learn all the available features of the product, as well as information on its operation. The information that you get Vision Fitness X6600HRT/DA will certainly help you make a decision on the purchase.
If you already are a holder of Vision Fitness X6600HRT/DA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vision Fitness X6600HRT/DA.
However, one of the most important roles played by the user manual is to help in solving problems with Vision Fitness X6600HRT/DA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vision Fitness X6600HRT/DA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
