Instruction/ maintenance manual of the product X6600HRT Vision Fitness
Go to page of 8
Assembly Guide X6600HR T COMMERCIAL ELLIPTICAL TRAINER.
1 STEP 2 STEP 3 STEP 4 STEP T o avoid possible damage to this Elliptical T rainer , please follow these assembly steps in the correct order . Before proceeding , find your new Elliptical T rainer’ s.
5mm T -Handled Wrench 17mm Socket Wrench Screwdriver 8mm L-Shaped Wrench TOOLS & P AR TS INCLUDED P AR TS BOX Console Mast Cover W ater Bottle Heart Rate Chest Strap Link Arm Covers, Qty: 2 Pedal .
ORANGE BAG HARDW ARE INCLUDED M10x70L CapScrew Quantity: 2 M8x20L Screw Quantity: 2 M20x29x1.5T W avy W asher Quantity: 2 M8x10L SocketHead CapScrew Quantity: 4 M8x80L SocketHead CapScrew Quantity: 1 .
5 1 STEP • Place the console mast boot on the end of the console mast. • Connect the wire tie that exits the bottom of the console mast to the wire harness that sits in the bracket at the top of the frame. Pull the wire tie and wire harness up through the console mast while at the same time inserting the console mast into the frame bracket.
6 2 STEP • Place a wavy washer (M20) on the axle located under the foot plate of the right lower link arm. • Slide the axle of the lower link arm into the bracket located on the top of the right pedal arm. Secure the lower link arm to the pedal arm by attaching the pedal support bracket and screw (M8x20L) to the end of the axle.
7 3 STEP • Connect the right dual-action arm to the right console mast rotation housing, being sure to line up the holes. Secure the dual-action arm in place with four screws (M8x20L) and tighten with the 6mm T -handled wrench. Snap the dual-action end cap into place.
500 South CP Avenue • P .O. Box 280 • Lake Mills. WI 53551 toll free 1.800.335.4348 • phone 1.920.648.4090 • fax 1.920.648.3373 www .visionfitness.com © 2004 Vision Fitness. All Rights Reserved. 6.04 Part #Z66EP67-AG AG18.32PRD REV1 8 4 STEP • Remove the four screws from the back of the console.
An important point after buying a device Vision Fitness X6600HRT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vision Fitness X6600HRT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vision Fitness X6600HRT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vision Fitness X6600HRT you will learn all the available features of the product, as well as information on its operation. The information that you get Vision Fitness X6600HRT will certainly help you make a decision on the purchase.
If you already are a holder of Vision Fitness X6600HRT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vision Fitness X6600HRT.
However, one of the most important roles played by the user manual is to help in solving problems with Vision Fitness X6600HRT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vision Fitness X6600HRT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
