Instruction/ maintenance manual of the product X6200HRT Vision Fitness
Go to page of 10
Assembly Guide X6100, X6200 AND X6200HR T FOLDING ELLIPTICAL TRAINERS.
5 STEP 1 STEP 4 STEP 3 STEP T o avoid possible damage to this Elliptical T rainer , please follow these assembly steps in the correct order . Before proceeding , find your new Elliptical T rainer’ s.
TOOLS & P AR TS INCLUDED Screwdriver 6mm L-Shaped Wrench P AR TS BOX Console Mast Boot Dual-Action Link Arm Covers Dual-Action Axle Covers Rear Stabilizers Pedal Arm Bracket Covers Pedal Support B.
ORANGE BAG PINK BAG BLACK BAG GREEN BAG M8x13L Screw Quantity: 6 8x35x2T W asher Quantity: 2 20x29x1.5T W avy W asher Quantity: 2 M8 Nut Quantity: 4 M4x15L PanHead Screw Quantity: 2 M5x10L Screw Quantity: 4 8x14x1.5T W asher Quantity: 3 M8x60L Screw Quantity: 3 25x34x2T W avy W asher Quantity: 2 8x25x1.
5 1 STEP Guide Rail Axle Stabilizer 1 STEP • For ease of assembly , place a block (about 2” thick) under the rear of the frame. • Slide the axle through the plastic sleeves of the right guide rail and the frame. Slide the left guide rail onto the left side of the axle.
6 2 STEP Pedal Arm Bracket Cover Rotation Axle Guide Rail Pedal Arm 2 STEP • Slide a wavy washer (25x34x2T) onto the right rotation axle. Slide the bushing housing of the right pedal arm onto the right rotation axle. The pedal arm roller wheel should be placed in the groove of the guide rail.
7 3 STEP Console Console Mast Boot Frame Bracket X6100 3 STEP • With the screwdriver , remove the screws for the water bottle cage in the center of the console mast. Slide the rubber boot onto the console mast. • Unfold the wire harness located in the frame bracket.
8 4 STEP Lower Link Arm 4 STEP GREEN BAG • Slide a wavy washer (20x29x1.5T) on the lower link arm axle, which is located under the foot plate. Slide the axle through the bracket located on top of the pedal arm. • Secure the lower link ar m to the pedal arm by attaching the pedal support bracket with three screws (M8x13L).
5 STEP Dual-Action Axle Cover Link Arm Covers Dual-Action Arm 9 5 STEP • On the right side, slide the dual- action axle cover into place on the con- sole mast axle. Slide a wavy washer (25x34x2T) onto the axle. Slide the right dual-action arm on the axle.
500 South CP Avenue • P .O. Box 280 • Lake Mills. WI 53551 toll free 1.800.335.4348 • phone 1.920.648.4090 • fax 1.920.648.3373 www .visionfitness.
An important point after buying a device Vision Fitness X6200HRT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vision Fitness X6200HRT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vision Fitness X6200HRT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vision Fitness X6200HRT you will learn all the available features of the product, as well as information on its operation. The information that you get Vision Fitness X6200HRT will certainly help you make a decision on the purchase.
If you already are a holder of Vision Fitness X6200HRT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vision Fitness X6200HRT.
However, one of the most important roles played by the user manual is to help in solving problems with Vision Fitness X6200HRT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vision Fitness X6200HRT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
