Instruction/ maintenance manual of the product X6200HRC/DA Vision Fitness
Go to page of 7
FITNESS VISION Guide Assembly MODELS X6200HRC/DA & X6000DA DUAL-ACTION ELLIPTICAL TRAINERS.
T o avoid possible damage to this Elliptical T rainer , please follow these assembly steps in the correct order . Before proceeding though, enter your new Elliptical T rainer’ s serial number here: Refer to this number when calling for ser vice, and also enter this serial number on your W arranty Card and in your own records.
5 MM Allen Wrench 13 MM Wrench Screwdriver 5 MM L-Shaped Wrench TOOLS & HARDW ARE INCLUDED M8 x 80 MM Bolt Quantity: 4 M8 x 13 MM Nylock Nut Quantity: 4 M8 x 45 MM Bolt Quantity: 2 BLUE BAG BLACK .
GREEN BAG M7 x 35 MM Bolt Quantity: 2 M8 x 12 MM Bolt Quantity: 2 M8 x 25 x 1.5T W asher Quantity: 2 M16 x 22 x .3T Spring W asher Quantity: 2 M26 x 34 x .3T Spring W asher Quantity: 2 M8 x 35 x 2T W asher Quantity: 2 M8 x 13 MM Nylock Nut Quantity: 4 13 MM Nut Caps Quantity: 2 ORANGE BAG M8 x 16 MM Bolt Quantity: 2 16 x 22 x .
5 1 STEP • Install the left and right stabilizers with the four bolts (M8 x 16 MM ), using the Blue 5 MM Allen wrench. • Cover both stabilizers with the included rubber boots. • Inser t the rear folding axle shaft (440 MM L x19 MM D) into the rear tube.
4 STEP • X6000 only: Unfold the RPM sensor wire, located in the frame console mast bracket. Remove any kinks. • All models: Slide the rubber console mast cover onto the bottom of console mast, and slide it up as far as it will go.
621-D East Lake Street • P .O. Box 280 • Lake Mills. WI 53551 toll free 1.800.335.4348 • phone 1.920.648.4090 • fax 1.920.648.3373 www .visionfitness.com 2000 Vision Fitness. All Rights Reserved. 8.00 Part #Z60EP08-AG1801PRD AG18.01PRD REV1 the vision to succeed 5 STEP 7 5 STEP • Slide a large spring washer (M26 x 34 x .
An important point after buying a device Vision Fitness X6200HRC/DA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vision Fitness X6200HRC/DA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vision Fitness X6200HRC/DA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vision Fitness X6200HRC/DA you will learn all the available features of the product, as well as information on its operation. The information that you get Vision Fitness X6200HRC/DA will certainly help you make a decision on the purchase.
If you already are a holder of Vision Fitness X6200HRC/DA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vision Fitness X6200HRC/DA.
However, one of the most important roles played by the user manual is to help in solving problems with Vision Fitness X6200HRC/DA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vision Fitness X6200HRC/DA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
