Instruction/ maintenance manual of the product X6000DA Vision Fitness
Go to page of 8
Guide Assembly X6000DA & X6200HR T/DA DUAL-ACTION ELLIPTICAL TRAINERS.
T o avoid possible damage to this Elliptical T rainer , please follow these assembly steps in the correct order . Before proceeding though, find your new Elliptical T rainer’ s serial number , locat.
5 MM Allen Wrench 13 MM Wrench Screwdriver 5 MM L-Shaped Wrench TOOLS, HARDW ARE, & P AR TS INCLUDED P AR TS BOX Rear Folding Axle, Qty: 1 • Stabilizer w/ Rubber Cover , Qty: 2 T oe Pieces, Qty:.
BLACK BAG BLUE BAG GREEN BAG M8 x 16 MM Bolt Quantity: 2 M16 W avy W asher Quantity: 2 M8 W asher Quantity: 2 M16 W asher Quantity: 2 M8 Lock W asher Quantity: 2 M5 x 25 MM Bolt Quantity: 1 (X6000DA o.
2 STEP X6200HRT/DA Only 5 1 STEP 1 STEP • Install the left and right stabilizers with the four bolts (M8 x 16 MM ), using the Blue 5 MM Allen wrench. • Cover both stabilizers with the included rubber covers. • Insert the rear folding axle shaft into the rear tube.
X6000DA Only 3 STEP 6 3 STEP • Mount the rear pedal arms to the front pedal arms using four bolts (M8 x 80 MM ) and four M8 NyLock nuts. Tighten with the 13 MM wrench. • X6000DA only: Install the foot toe pieces to the front pedal arms with two bolts (M8 x 45 MM ) using the Blue 5 MM Allen wrench.
7 4 STEP • X6000DA only: Unfold the RPM sensor wire, located in the frame console mast bracket. Remove any kinks. • All models: Slide the rubber console mast cover onto the bottom of console mast, and slide it up as far as it will go. • All models: Unfold the console cable and attach it to the string located at the bottom of the console mast.
8 621-D East Lake Street • P .O. Box 280 • Lake Mills. WI 53551 toll free 1.800.335.4348 • phone 1.920.648.4090 • fax 1.920.648.3373 www .visionfitness.com 2001 Vision Fitness. All Rights Reserved. 4.01 Part #Z60EP08-AG1801PRD AG18.01PRD U.
An important point after buying a device Vision Fitness X6000DA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vision Fitness X6000DA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vision Fitness X6000DA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vision Fitness X6000DA you will learn all the available features of the product, as well as information on its operation. The information that you get Vision Fitness X6000DA will certainly help you make a decision on the purchase.
If you already are a holder of Vision Fitness X6000DA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vision Fitness X6000DA.
However, one of the most important roles played by the user manual is to help in solving problems with Vision Fitness X6000DA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vision Fitness X6000DA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
