Instruction/ maintenance manual of the product R2600HRT Vision Fitness
Go to page of 9
Assembly Guide R2600HR T COMMERCIAL FITNESS BIKE.
1 STEP 2 STEP 4 STEP T o avoid possible damage to this Fitness Bike, please follow these assembly steps in the correct order . Before proceeding, find your new Fitness Bike’ s serial number located .
5mm Allen Wrench Screwdriver 5mm L-Shaped Wrench TOOLS & P AR TS INCLUDED 4mm L-Shaped Wrench P AR TS BOX Console Mast Cover W ater Bottle Heart Rate Chest Strap Color-coded Hardware Bags Pedals/S.
ORANGE BAG GREEN BAG PINK BAG HARDW ARE INCLUDED BLUE BAG M8 x 15L Screw Quantity: 7 M8 x 20L Screw Quantity: 2 M8x65L Screw Quantity: 2 M8 Lock W asher Quantity: 4 M8 Lock W asher Quantity: 6 M8 x 15.
5 2 STEP • Slide the console mast boot onto the console mast. • Unfold the wire harness and hear t rate wires located in the console mast frame bracket. Attach the wire tie coming from the bottom of the console mast to the wire harness and hear t rate wires.
6 3 STEP • Mount the upper handlebars to the console mast using two lock washers (M8) and two screws (M8x15L). Tighten with the 5mm Allen wrench. • Remove the four mounting screws from the back of the console. Connect the wire harness and hear t rate wires that come from the console mast into the plugs located in the back of the console.
7 4 STEP • Attach the seat frame to the sliding seat bracket using four lock washers (M8) and four socket head cap screws (M8x20L) and the 6mm Allen wrench. • Connect Wires A on the seat handlebar to Wires B on the sliding seat bracket. Attach the seat handlebars to the sliding seat bracket using four lock washers (M8) and four screws (M8x15L).
8 5 STEP Lumbar Controlled Seat Back Seat Bottom Plastic Seat Cover 5 STEP • Secure the Lumbar controlled seat back and the seat bottom to the seat frame with eight lock washers (M6) and eight screws (M6x55L). Tighten with the 4mm Allen wrench. • Snap the plastic seat cover into place on the back of the Lumbar controlled seat.
9 500 South CP Avenue • P .O. Box 280 • Lake Mills. WI 53551 toll free 1.800.335.4348 • phone 1.920.648.4090 • fax 1.920.648.3373 www .visionfitness.com © 2004 Vision Fitness. All Rights Reserved. 9.04 Part #Z26RB77-AG AG18.30PRD REV2 6 STEP Accessory T ray Pedal 6 STEP • Attach the left and right pedals to the left and right crank arms.
An important point after buying a device Vision Fitness R2600HRT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vision Fitness R2600HRT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vision Fitness R2600HRT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vision Fitness R2600HRT you will learn all the available features of the product, as well as information on its operation. The information that you get Vision Fitness R2600HRT will certainly help you make a decision on the purchase.
If you already are a holder of Vision Fitness R2600HRT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vision Fitness R2600HRT.
However, one of the most important roles played by the user manual is to help in solving problems with Vision Fitness R2600HRT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vision Fitness R2600HRT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
