Instruction/ maintenance manual of the product R2200 Vision Fitness
Go to page of 8
Assembly Guide R2200 AND R2200HR T SEMI-RECUMBENT FITNESS CYCLE.
1 STEP 2 STEP 3 STEP 4 STEP T o avoid possible damage to this Fitness Cycle, please follow these assembly steps in the correct order . Before proceeding, fin d your new Fitness Cycle’ s serial numbe.
TOOLS & P AR TS INCLUDED 5mm Allen Wrench 15mm Pedal Wrench Screwdriver 5mm L-Shaped Wrench 4mm L-Shaped Wrench 6mm L-Shaped Wrench P AR TS BOX Console Mast Cover , Qty: 1 Pedals, Qty: 2 Power Sup.
ORANGE BAG BLUE BAG PINK BAG HARDW ARE INCLUDED M8 x 20L Screws Quantity: 2 M8 x 65L Screw Quantity: 2 M8 Lockwashers Quantity: 4 M8 x 20L Socket-head Cap Screw Quantity: 4 M8 x 15L Screws Quantity: 4.
5 1 STEP 1 STEP • Slide the rear foot into place on the frame. Secure the foot in place with two screws (M8x20) and two lock washers (M8) to the outside holes and with two screws (M8x65) and two lock washers (M8) to the inside holes. Tighten with the blue-handled 5mm allen wrench.
6 Seat Frame B A Seat Bracket R2200HR T Seat Lever R2200 2 STEP 2 STEP • Place the seat bracket on the seat frame. Secure in place with four (M8x20) socket-head cap screws.
7 3 STEP 3 STEP • Slide the console mast cover onto the console mast. • Use the wire tie coming from the bot- tom of the console mast to wrap around the wire harness and hear t rate wires that are sitting in the frame bracket. • Pull the wire tie up through the con- sole mast so the wire harness and hear t rate wires exit the top of the mast.
8 500 South CP Avenue • P .O. Box 280 • Lake Mills. WI 53551 toll free 1.800.335.4348 • phone 1.920.648.4090 • fax 1.920.648.3373 www .visionfitness.com © 2005 Vision Fitness. All Rights Reserved. 1.05 Part #Z22RB42D-AG AG18.16PRD REV4 4 STEP 4 STEP • Attach left pedal strap to left pedal and right pedal strap to right pedal.
An important point after buying a device Vision Fitness R2200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vision Fitness R2200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vision Fitness R2200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vision Fitness R2200 you will learn all the available features of the product, as well as information on its operation. The information that you get Vision Fitness R2200 will certainly help you make a decision on the purchase.
If you already are a holder of Vision Fitness R2200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vision Fitness R2200.
However, one of the most important roles played by the user manual is to help in solving problems with Vision Fitness R2200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vision Fitness R2200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
