Instruction/ maintenance manual of the product R2000 Vision Fitness
Go to page of 9
Assembly Guide R2100 AND R2000 SEMI-RECUMBENT FITNESS BIKES.
1 STEP 2 STEP 4 STEP 5 STEP T o avoid possible damage to this Fitness Bike, please follow these assembly steps in the correct order . Before proceeding, find your new Fitness Bike’ s serial number l.
5mm T -Shaped Wrench 15mm Pedal Wrench Screwdriver 5mm L-Shaped Wrench TOOLS & P AR TS INCLUDED 4mm L-Shaped Wrench P AR TS BOX Console Mast Cover Pedals Seat Rail Cover T ension Knob and bracket .
BLUE BAG ORANGE BAG GREEN BAG HARDW ARE INCLUDED M8 x 15L Screw Quantity: 4 M8 Lockwasher Quantity: 4 M5 x 65L Screw Quantity: 1 (R2000 ONL Y) M8 x 15L Screws Quantity: 5 M8 Lockwashers Quantity: 4 M5.
5 1 STEP • Attach the rear support to the seat rail with four screws (M8x15) and four lock washers (M8). Tighten with the 5mm T -shaped wrench. • Slide the seat frame onto the seat rail. Make sure the flat side of the clamp block rests against the bottom of the seat rail.
6 2 STEP • Slide the seat rail sleeve onto the seat rail. • Connect the heart rate wires com- ing from the seat rail to the heart rate wires coming from the seat frame bracket. T uck the excess wire under the seat frame bracket. • Slide the seat rail onto the seat rail bracket.
7 3 STEP • With four screws (M8x15) and four lock washers (M8) attach the seat han- dlebar to the seat frame. • Connect the heart rate wires coming from the seat handlebar to the heart rate wires on the seat frame. • Mount the backrest and the seat cushion to the seat frame using eight screws (M6x35) and eight arc wash- ers (M6).
8 4 STEP • Slide the mast cover onto the console mast. • With the included wire tie, pull the console cable, or sensor wire, and heart rate wires, through the console mast.
9 500 South CP Avenue • P .O. Box 280 • Lake Mills. WI 53551 toll free 1.800.335.4348 • phone 1.920.648.4090 • fax 1.920.648.3373 www .visionfitness.
An important point after buying a device Vision Fitness R2000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vision Fitness R2000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vision Fitness R2000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vision Fitness R2000 you will learn all the available features of the product, as well as information on its operation. The information that you get Vision Fitness R2000 will certainly help you make a decision on the purchase.
If you already are a holder of Vision Fitness R2000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vision Fitness R2000.
However, one of the most important roles played by the user manual is to help in solving problems with Vision Fitness R2000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vision Fitness R2000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
