Instruction/ maintenance manual of the product E4100 Vision Fitness
Go to page of 9
ASSEMBL Y INSTR UCTIONS E4100 To avoid possible damage to this Fitness Cycle, please follow these assembly instructions. Carefully remove all its parts from the box, lay them out and review the parts list.
E4100 P ar ts Dia g ram.
VISION FITNESS E4100 P ar ts Description P ar t # Description Count Dimensions Front Wheel Parts #60 Front Foot Wheel Axle 1 #61 Front Transport Wheels 2 #182 Outside Wheel Washers 2 #183 Wheel Attach.
E4100 Assembl y NOTE: During each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before completely tightening any ONE bolt. Step 1 • Rear F oot 1: Secure the Rear Foot Assembly (62) to the Frame by using the four Rear Foot Attachment Bolts (167).
E4100 Assembl y Step 5 • Connect Magnet Shift Cable 1: Turn the Tension Knob to position 8. Reach inside the opening of the Console Mast (70) and connect the Upper Magnet Shift Cable (179) to the rectangular red cable-slide on the end of the Lower Magnet Shift Cable (143), as shown in the accompanying illustrations.
E4100 Assembl y 6: Slip the Front Transport Wheel (61) onto the right side of the Front Foot Wheel Axle (60). Secure this wheel with the Outside Wheel Washer (182) and the Wheel Attach Nut (183). This nut should be tightened until the wheel has no side-to-side play, but it can still be easily rotated with your fingers.
E4100 Final Assembl y Step 7 • P edals 1: Identify the left and right Pedals (91). Grease the Pedal threads, thread each Pedal into the correct left and right crank arms and tighten. NOTE: It is very important to FULLY TIGHTEN each pedal using a long wrench.
CAM ARM CAM ARM SIL VER W ASHER SIL VER W ASHER SIL VER W ASHER SIL VER W ASHER BLACK W ASHER BLACK W ASHER NUT NUT INSIDE CAM PULLEY WHEEL INSIDE CAM PULLEY WHEEL OUTSIDE CAM PULLEY WHEEL OUTSIDE CAM.
62 1-D Eas t Lake Stree t P .O. Bo x 280 Lake Mills, WI 5355 1 (920) 648-4090.
An important point after buying a device Vision Fitness E4100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vision Fitness E4100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vision Fitness E4100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vision Fitness E4100 you will learn all the available features of the product, as well as information on its operation. The information that you get Vision Fitness E4100 will certainly help you make a decision on the purchase.
If you already are a holder of Vision Fitness E4100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vision Fitness E4100.
However, one of the most important roles played by the user manual is to help in solving problems with Vision Fitness E4100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vision Fitness E4100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
