Instruction/ maintenance manual of the product VP-8059 VIPowER
Go to page of 8
W e are your DataBridge T M http://www .vipower .com Installation Manual MODEL VP-8059 MODEL VP-8059L FireWire 1394dock Docking Kit for use with Mobile Rack Removable Docking Modules with 3.
PROPRIETARY NOTICE ViPowER Inc. makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
FireWire 1394dock Installation Manual 1 1-1 Intr oduction Congratulations on your purchase of the FireWire 1394dock Docking Kit. The FireWire 1394dock is an external 1394 interface adapter which is de.
2 FireWire 1394dock Installation Manual 1-1.2 ATA/ATAPI Device Compatibility • ATAPI removable drives: Iomega Zip 100MB/250MB and Clik!, LS-120 Super Floppy, Sony HiFD 200MB, MO drives, tape drives • Enhanced IDE and ATA hard drives: both 2.5” and 3.
FireWire 1394dock Installation Manual 3 2-1 Installation Refer to the following for setup of the FireWire 1394dock for operation. • For Mac ® user’s: A software driver is required for operation of the FireWire 1394dock with Mac computers. This must be purchased separately.
4 FireWire 1394dock Installation Manual 2-1.2 Setting Up the FireWire 1394dock for Operation Perform the following steps (in the order given) to set up the FireWire 1394dock with your peripheral device for operation: 1. Plug the FireWire 1394dock’s 50-pin connector into the connector on the device you plan to connect to your computer.
FireWire 1394dock Installation Manual 5 2. Using the +5V/+12V AC/DC Power Adapter: a. With the power switch in the OFF position, plug in the 6-pin connector-end of the power adapter into its corresponding +5V/+12V power-in connector on the FireWire 1394dock.
Printed on recycled paper. 3-1 Disconnecting the FireWire 1394dock Perform the following steps to disconnect the FireWire 1394dock from your computer. 1. Turn off the power by sliding the power switch on the 1394dock to the OFF position. (Note that the drive icon will disappear from the computer screen.
An important point after buying a device VIPowER VP-8059 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought VIPowER VP-8059 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data VIPowER VP-8059 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, VIPowER VP-8059 you will learn all the available features of the product, as well as information on its operation. The information that you get VIPowER VP-8059 will certainly help you make a decision on the purchase.
If you already are a holder of VIPowER VP-8059, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime VIPowER VP-8059.
However, one of the most important roles played by the user manual is to help in solving problems with VIPowER VP-8059. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device VIPowER VP-8059 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
