Instruction/ maintenance manual of the product PLC10V49 VIORE
Go to page of 28
.
.
Safety Precautions User Guidance Information Connection Basic Use Application Maintenance and Service - Power Supply - Installation - Use and Maintenance - Important Safety Instructions 1 2 3 4-5 - Op.
W arnings Cautions 1 Power Supply Do not touch the power plug with wet hands. . Doing so may result in electric shock. Do not use a damaged power cord or plug or a loose outlet. . Doing so may result in fire or electric shock. Do not plug several devices into the same outlet.
W arnings Cautions 2 Installation Do not place the unit where it is exposed to rain, excessive moisture or grease. . Doing so may result in fire electric shock, malfunction, or deformation. Do not use or store flamm able or combustible materials near the unit.
W arnings Cautions 3 Use and Maintenance Disconnect the power cord from the wall outlet during an electric storm. . Not doing so may result in fire or electric shock. When not using the unit for long periods of time, discon- nect the power cord from the wall outlet.
4 Important Safety Instructions Safety Precautions Servicing is required when the apparatus has been damaged in any way , such as power supply cord or plug is damaged, liquid has been spilled or objec.
5 Important Safety Instructions Apparatus with Class I construction shall be connected to a Main socket outlet with a protective earthing connection. Servicing is required when the apparatus has been damaged in any way .
Front view 6 Accessories Names of each part The following accessories are included in the package Profile view User Guidance Information Power adapter Car adapter s e n o h p d a e H AV connection cab.
Disassembly of TV Base Wall-Hanging Standing the TV with Bracket 7 Names of each part User Guidance Information slots.
-/-- CC VOL- L VO - VOL+ VOL+ SLOW CH+ CH- EPG SETUP SUB 10+ ZOOM SLEEP LANG ST ANDBY DISPLA Y MUTE TV/AV LCD MENU GOTO REPEAT A-B PROG 8 Remote Control Function of remote control buttons The remote control uses infra-Red(IR). Point it towards the front of the LCD TV .
9 Power connection Power adapter (Included) Power Connecting 1. Connect the small round plug on the power adapter cable to the power input socket at the rear of the set.
10 Input Connections Headphone Connection W atching Video Signal * Connect the LCD TV’ s A V IN/OUT terminal to the output/input terminals with a Composite Cable and an AV Connection Cable(supplied) as the picture shows.
Press button on the remote control. Use to move to the desired input source. Press to select. 11 Powering the LCD TV T o turn on the LCD TV . ENTER TV/AV Connect the DC power supply. Push the switch up, and then press STANDBY on the LCD TV. T o turn off the LCD TV .
4. Use the and buttons to select an option of the sub-menu, and press the button. While in adjustment mode, use the and buttons to change the value of the item. 5. Press the LCD-MENU button to exit the menu. Note: Only when you input the suitable signal, the relevant items can be activated.
Press LCD-MENU button on the TV set to display the OSD MENU. 13 Customizing the PICTURE Settings The OSD menu includes the following options: Brightness Controls the overall brightness of the picture Contrast Controls the difference between the brightest and darkest regions of the picture.
Press LCD-MENU button twice on the TV set to display the OSD MENU. 14 Customizing the FUNCTION Settings The FUNCTION menu includes the following options: Language Select the OSD menu language. Blue Screen T urn on/off the blue screen display when there’s no signal.
Autosearch Press button, the screen will display a cue, and use and button to select “YES” or “NO”, if you select “YES”, and press ENTER button to confirm, it will start to autosearch. 15 Customizing the TUNING Settings The TUNING menu includes the following options: Press LCD-MENU button thrice on the TV set to display the OSD MENU.
Press button on the remote control in DTV mode, the screen will display the Guide menu as below . Press button to cancel. Note: The content shown in the picture above is just an example. 16 EPG menu EPG EPG Press button on the remote control in DTV mode, the screen will display the Closed Caption as below .
17 Media Operation Playing media files from the USB and SD card slots - The following files formats are supported by this TV: JPG, MP3, WMA, MP4 (DivX3.11-5.11, Xvid), MPEG1 (DAT, MPG, MPEG), MPEG2 (mpeg, mpg). - File formats including the following are not supported by this TV: BMP, PNG, AAC, DivX 6, DivX HD, Vob, ts.
18 Media Operation Playing media files from the USB and SD card slots Ź8VHŻŹWRVHOHFW (3) - Music , (4) - Photo or (5) - Movie 7KHOLVWRIIROGHUVLVGLVSODHG in area (1) .
19 Media Operation System Settings for Media System operation will define the setting of the set; these definitions will be stored until you change them again. General Steps of Setup Menu 1. Press SETUP on the remote control. The main menu will be shown as below .
20 Media Operation System Settings for Media 2. LANGUAGE SETUP The language setup options are illustrated below: - OSD LANGUAGE: The OSD will display in the language you choose. 3. AUDIO SETUP -TONE: Use the / button to move the scroll and adjust the tone.
21 T rouble shooting n o i t c A m e l b o r P The screen does not appear. Is the power plug pulled out? Insert the power plug. Press the power button. The screen appears too This problem occurs for a brief time in the progression of image elimination processing in order to hide temporary screen noise that occurs when the power is turned on.
.
.
Ver. 090904 Printed in China VIORE TM LIMITED WARRANTY Model: PLC10V49 This VIORE brand Product, as supplied and distributed by VIORE and delivered new in the original carton to the original purchaser is warranted by VIORE against manufacturing defects in materi als and workmanship for a limited warranty period of one (1) year on parts and labor.
VIORE, Inc. 7801 Hayvenhurst Avenue, Van Nuys, California 91406 Printed in China.
An important point after buying a device VIORE PLC10V49 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought VIORE PLC10V49 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data VIORE PLC10V49 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, VIORE PLC10V49 you will learn all the available features of the product, as well as information on its operation. The information that you get VIORE PLC10V49 will certainly help you make a decision on the purchase.
If you already are a holder of VIORE PLC10V49, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime VIORE PLC10V49.
However, one of the most important roles played by the user manual is to help in solving problems with VIORE PLC10V49. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device VIORE PLC10V49 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
