Instruction/ maintenance manual of the product LC4OVXF6OSB VIORE
Go to page of 32
40" I080p LCD Television LC4OVXF6OSB AIR (TV)/CABLE MODE SELECTION The Air/CABLE menu option is set to the "CABLE" (Cable Television) mode at the factory. If you want to use an antenna for the built-in TV tuner, this menu option must be set to the "Air" mode.
• Caution .......................................................................................... 1 • Safety Information ................................................................................ 2 • Names of each part(Front View) / Accessories .
A The lightening flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of un-insulated "dangerous voltage" within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the persons.
To ensure reliable and safe operation of this equipment, please read carefully all the instructions in this user guide, especially the safety information below. Electrical safety • The TV set should only be connected to a mains supply which matches that stated on the label.
L._____J m 4ran _!! _11 zl| _mn _mn ._ | | m | | -0 O TV/AV button- Input Source Select Button O POWER button MENU button- OSD Menu Display Button O LED Indicator CH+/- button - Channel/Program _,- Bu.
_) HDMI2 jack O AV OUTVIDEOand AUDIO(R/L) _ RF HDMII jack _ AV1 iN VIDEO and AUDIO(R/L) _, AC input jack O PC a.d AUDIO jack O S-VIDEO @ SWITCH AV2 iN VIDEO and AUDJO(RIL) O COAXIAL (Digital Audio out} Y,Pb,Pr jack(component} e To turn on the LCD TV Press _ on the buttom of the LCD TV to _ first.
÷ Your LCD TV can be mounted on a Desktop as shown in the figure above. ÷ This is not floor-standing unit. ÷ Please secure enough space for safe use. (Please refer to A and B.) ÷ Installation of the LCD TV in an improperly ventilated location can cause a fire or damage to the LCD TV due to increased temperature.
÷ For connecting to ATSC or NTSC broadcasts O ] Wall Jack with F-Connector external .... Antenna Coaxial (Round) Antenna Cable Analog+Digital 75 O Press TV/AV button on the remote control to select TV, then press OK button to confirm. Then you can receive the ATSC/NTSC signal.
÷Functions of remote control buttons The remote control is using Infra-Red (In). Point it towards the front of the LCD TV. The remote control may not work correctly if it is operated out of range or out of angle. POWER Press to turn the TV on/standb MUTE Press to mute the sound.
THUMBSTICK (_d T/,4/ _./OK) Allows you to navigate the on-screen menus and adjust the system settings to your preference. MENU Press to display the OSD menu.
1. Check the polarity (+,-) of the batteries in the remote control. 2. Check that the batteries have power. 3. Check that the LCD TV is powered and that it is properly plugged in. 4. Check if any three-wavelength lamp, special fluorescent or neon sign is turned on near the LCD TV.
÷ Connecting to the Composite terminal _._ Connection terminals of other equipments differ by manufacturer and model. < VIDEO > t Composite Cable Connect the LCD TV's Composite In terminal to the VCR's Composite Out terminal using the Composite cable.
÷ Connecting to the Composite terminal ÷ In order to watch Cable TV, Subscribeto your local Cable TV company and install a separate receiver(Set-Top-Box) _.
÷ Connecting to the component terminaJ • _ Connection terminals of other equipments differ by manufacturer and model. < DVD > 1. Connect LCD TV's Y, Pb, Pr terminal to DVD's Video Out terminal using the external cable.
÷ Connection terminals of other equipments differ by manufacturer and model. <PC> PC Audio Cable • Connect LCD TV's PC Input terminal to PC's RGB terminal using the D-Sub cable. • Connect LCD TV's PC Audio terminal to PC's Audio terminal using the Audio cable.
÷ Connecting to the Audio Amplifier and Monitor ÷ Connection terminals of other equipments differ by manufacturer and model. <Monitor> Video Cable <Audio Amplifier> t Connect LCD TV's AUDIO(L/R) output terminal to Audio Amplifier using an audio patch cable.
÷ Power on/off m m Press _ on the buttom of the LCD TV to _ first. • To turn the LCD TV on • Press "POWER" button on the LCD TV. • To turn the LCD TV off" Press "POWER" button on the LCD TV. • To turn on/off by remote control ' POWER Press the button of remote control.
1. After you turn on the TV and select the input source, you should setup the on-screen menu. 2. Press MENU button to display the on-screen menu. 3. Press 4/I_ button to select the main menu: PICTURE, AUDIO, TIMER, SETUP, LOCK, CHANNEL. 4. Press • button to enter the main menu.
The PICTURE menu includes the following options " Picture Mode Cycles among picture display modes: Standard, Dynamic, Mild, Sports, User. Contrast Controls the difference between the brightest and darkest regions of the picture. Brightness Controls the overall brightness of the picture Color Controls the color.
The SOUND menu includes the following options ' Sound Mode Allows you to select among: Flat, Music, Movie, Sports and User. Bass Controls the relative intensity of lower pitched sounds.
The TIMER menu includes the following options " Sleep Timer Allows you to set up the sleep timer among: 5min, 10min, 15min, 30min, 45min, 60min, 90min, 120min, 180min, 240min and off. Time Zone Allows you to set up the sleep timer among: Pacific, Alaska, Hawaii, Eastern, Central and Mountain.
The SETUP menu includes the following options: ______________________________________________________________________________________ i_iiiiiiiiiiHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH , Menu Language Allows you to select menu language among: English, Frangais, Espadot and Deutsch.
Close Caption Use • button to highlight the Close Caption item, then press • button to enter into the following menu_ CC Mode Basic Selection Advanced Selection Option Allows you to select the CC Mode among: On, Off and CC on Mute.
You should enter the password to enter the Lock menu. NOTE: the factory password is 0000. input 4-digit password The LOCK menu includes the following options " Change Password Use • button to select the "Change Password" item, then press I_ button to enter into the following menu.
US Use • button to highlight the "US" item, then press • button to enter into the following menu. TV Use • button to highlight the "TV" item, then press • button to enter into the following menu_ Use • and • buttons to select the desired rating and press • button to block or unblock rating.
Canada Use Down button to highlight the "Canada" item, then press RIGHT button to enter into the following menu. Canada English Use LEFT and RIGHT buttonsto selectamong: E, C, C8+, G, PG, 14+ and 18+ Canada French Use LEFT and RIGHT buttonsto selectamong:E, G, 8ans+, 13ans+,16ans+ and 18ans+ Reset RRT Allows you to reset the RRT setting.
The Channel menu could only be operated in TV source. COLOR TV BROADCASTING SYSTEM AZORES(PORTUGAL) BALKANS(KOSOVO, BOSNIA) BELGIUM/GERMANY/ITALY IRAQ AFGHANISTAN NETHERLANDS/NORWAY SAUDI ARABIA KUWAIT/TURKEY/JORDAN UNITED KINGDOM CZECH/HUNGARY/POLAND RUSSIA U.
If you select "Cable" as input signal in Antenna item, allows you to select Cable System among: Auto, STD, IRC and HRC. Use • button to highlight the "Start to Scan", then press • button to search the channels automatically. The receivable channels will be stored automatically.
480i _20X480 I 480p 720X480 27.
• Do not use other functions that are not mentioned in this user's manual. • In case a problem occurs with your LCD TV, please take the following steps first. • If you still have the problem, turn the power off and contact your dealer or an authorized service center.
The cabinet design and electronics specifications wilt be modified without prior notice for improving the performance. Weight and dimensions are approximate 29.
VIORE TM LIMITED WARRANTY FLAT PANEL TELEVISION This VIORE brand Product, as supplied and distributed by VIORE and delivered new in the original carton to the original purchaser is warranted by VlORE against manufacturing defects in materials and workmanship for a limited warranty period of one (1) year on parts and labor.
An important point after buying a device VIORE LC4OVXF6OSB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought VIORE LC4OVXF6OSB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data VIORE LC4OVXF6OSB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, VIORE LC4OVXF6OSB you will learn all the available features of the product, as well as information on its operation. The information that you get VIORE LC4OVXF6OSB will certainly help you make a decision on the purchase.
If you already are a holder of VIORE LC4OVXF6OSB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime VIORE LC4OVXF6OSB.
However, one of the most important roles played by the user manual is to help in solving problems with VIORE LC4OVXF6OSB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device VIORE LC4OVXF6OSB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
