Instruction/ maintenance manual of the product WM1500 SSW Vinotemp
Go to page of 16
WINEMATE Split System Installation, Operation & Care Manual WM1500 SSW WM2500 SSW V V i i n n o o t t e e m m p p I I n n t t e e r r n n a a t t i i o o n n a a l l C C o o r r p p .
TABLE OF CONTENTS Important Safety Info rmation…..........................................2 Feature Description…………………………….……………..3 Installation Instruction………………………………………..5 Use and Temperature Control……………………………….
Important Safety Information • DO NOT USE A GROUND FAUL T INTERRUPTER (GFI). • A DEDICATED 20 AMPCIRCUIT IS HIGHLY RECOMMENDED. - 2 -.
Feature Description • WineMate split cooling system is designed and used to provide a stable temperature between 52~62 ° F for suitable space at a normal environment. • The refrigerated space will mainta in humidity of 50~70% RH even when the environment becomes dry and humid.
Evaporator Unit Condensing Unit - 4 -.
Installation Instruction Federal law requires that WINEMA TE split cooling systems be installed by an EPA certified refrigeration technician. 1. Location • Place the condensing unit in a properly v entilated location. If it is not, heat exhausted by the condensing unit will build up and the cooling sy stem will not operate properly.
The condensing unit and unit cooler are connected by a liquid line and an insulated suction line that are supplied by the insta ller. These lines must be properly sized for the distance between the two units. After the units and the lines are installed, the system must be pressure tested.
Use & Temperature Control 1. Temperature Setting • Set the temperature at 55 ° F for the optimum aging of wine • Set the temperature higher at very high ambient temperature.
1.2 Front Panel Commands 2) Alarm Signals 2.1 Code Description 2.2 Alarm Recovery Probe alarms P1”, start a few seconds afte r the fault in the re lated probe; they automatically stop a few seconds afte r the probe restarts normal operation. Check connections before replacing the probe.
1. Push the SET key for more than 3 seconds to change the Set point value; 2. The value of the set point will be di splayed and the “°C” or “°F” LED starts blinking; 3. To change the Set value, push the o or n arrows within 10s. 4. To memorize the new set point value, push the SET key again or wait 10s.
Care Guide In general, always unplug system or di sconnect power while doing care. 1. Coil Cleaning • Clean the condenser coil regularly . Coil may need to be cleaned at least every 6 months. • Unplug the system or disconnect power. • Use a vacuum cleaner with an ext ended attachment to clean the coil when it is dusty or dirty.
Troubleshooting This Troubleshooting Chart is not prepared to replace the training required for a professional refrigeration servic e person, not is it comprehensive Troubleshooting Chart Complaint Possible Causes Response 1. Unit not running a. Power cord unplugged b.
g. Low voltage h. Operating 60 Hz unit at 50Hz i. Sealed system problem j. Undercharge or overcharg e g. Check power sup ply h. Use proper 60 Hz i. Call service for checking loss of refrigerant or restrictions j. Call service to add or remove refrigerant 7.
Customer Support If you still have problems, please contact us at: Vinotemp International 17631 South Susana Road Rancho Dominguez, CA 90221 Tel: (310) 886-3332 Fax: (310) 886-3310 Email: info@vinotemp.
Warranty Thank you for choosing a Vinotemp wine cellar. Please enter the complete model and se rial numbers in the space provided: Model_____________ _________________________ __ _________________ Serial No._________________ ____________________ _________________ Attach your purchase receipt to this owner’s manual.
VINOTEMP will, at its discret ion, repair or replace the unit and return it free of charge to the original retail customer. If the unit is found to be in good working order, or beyond the initial twelve month period, it will be returned freight collect.
An important point after buying a device Vinotemp WM1500 SSW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vinotemp WM1500 SSW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vinotemp WM1500 SSW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vinotemp WM1500 SSW you will learn all the available features of the product, as well as information on its operation. The information that you get Vinotemp WM1500 SSW will certainly help you make a decision on the purchase.
If you already are a holder of Vinotemp WM1500 SSW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vinotemp WM1500 SSW.
However, one of the most important roles played by the user manual is to help in solving problems with Vinotemp WM1500 SSW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vinotemp WM1500 SSW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
