Instruction/ maintenance manual of the product WINEMATE VINO-1500SS Vinotemp
Go to page of 6
VINO1500SS VINO1900SS Installer’s Instruction Federal law requires that WINEMA TE split cooling systems be installed by an EPA certified refrigeration technician. WINEMATE split system is shipped as components and is ready for use only after a certified refrigeration technici an has properly installed, evacuated, charged and tested the system.
- 1 - CAUTION: DO NOT SWITCH ON THE COMPRESSOR IF THE CONDENSING UNIT IS EQUIPPED WITH A LOW AMBIENT CO NDITION KIT UNTIL THE UNIT HAS BEEN PLUGGED IN FOR 24 HOURS. 2. Valve Operation (Condensing unit) BACK POSITION FRONT POSITION MIDDLE POSITION Fig.
- 2 - • There is a gravity drai n line and the unit shall be in stalled level or with a slight angle toward the drain c onnection. If rise-up is needed, a condensation pump must be used.
- 3 - • EXPANSION VALV E AND SOLENOID VALVE ARE INSTALLED ON LIQUID LINE. 5. Pressure, Superheat and Subcooling Readings CAUTION: THE VALVES MUST BE IN THE MIDDL E POSITIONS TO READ PROPERLY. Complaint Possible Causes a. High suction pressure and low head pressure b.
- 4 - A. Single Control Fig. 3 Single Adjustable Pressure Control B. Dual Control Fig. 4 Dual Adjustable Pressure Control 7. Use of the encapsulated pressu re control (if applicable) Fixed suction pre.
- 5 - 8. Use of the condenser fan control (i f applicable for low ambient kit) Head pressure setting: Cut in=170 psig; Cut out=120 psig; Differential=50 psig It may need to adjust the setting in the field to prevent short fan cycle.
An important point after buying a device Vinotemp WINEMATE VINO-1500SS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vinotemp WINEMATE VINO-1500SS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vinotemp WINEMATE VINO-1500SS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vinotemp WINEMATE VINO-1500SS you will learn all the available features of the product, as well as information on its operation. The information that you get Vinotemp WINEMATE VINO-1500SS will certainly help you make a decision on the purchase.
If you already are a holder of Vinotemp WINEMATE VINO-1500SS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vinotemp WINEMATE VINO-1500SS.
However, one of the most important roles played by the user manual is to help in solving problems with Vinotemp WINEMATE VINO-1500SS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vinotemp WINEMATE VINO-1500SS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
