Instruction/ maintenance manual of the product VRBD/VUBD 24" W. BEVERAGE DISPENSER Viking
Go to page of 16
USE/INST ALLA TION INSTRUCTIONS VRBD/VUBD 24” W . BEVERAGE DISPENSER Retain for Futur e Refer ence VIKING 111 Front Str eet Greenwood, Mississippi 38930 USA (662) 455-1200 IMPORT ANT - PLEASE READ AND FOLLOW •Before beginning, please r ead these instructions completely and carefully .
2 BUIL T -IN INST ALLA TION Select Location The proper location will ensur e peak perfor mance of your appliance. Choose a location where the unit will be out of direct sunlight and away fr om heat sources. Units with fan cooled condensers can be built-in.
3 CASTERS Y our beverage dispenser is equipped with four casters. the front two casters can be locked. For built-in applications, the four casters can be removed by removing the nut located inside the dispenser cabinet and then pulling the threaded caster spindle thr ough the base of the unit.
4 DIMENSIONS - FREEST ANDING MODELS FRONT SIDE TOP 24 5/8” (62.5 cm) 41 25/32” (106.2 cm) 4 3/16” (10.6 cm) 2 1/16” (5.2 cm) 1 1/4” (3.2 cm) 35 9/16” (95.4 cm) 25 1/8” (63.8 cm) 12 7/8” (32.7 cm) 24 5/8” (62.5 cm) 22” (55.9 cm) 13 3/4” (34.
5 CABINET CUTOUT - UNDERCOUNTER MODELS A 24” (61.0 cm)* B Min. 34 1/8” (87.9 cm Max. 35 1/8” (89.2 cm) C 24” (61.0 cm) Rear W all Countertop Countertop 24” (61.0 cm) Standard Cabinet Depth 25” (63.5 cm) Standard Cabinet Depth 1 1/2” (3.8 cm) 1 11/32” (3.
6 DIMENSIONS - UNDERCOUNTER MODELS FRONT SIDE TOP 23 7/8” (60.7 cm) Min 34” (86.4 cm) Max 35” (88.9 cm) with leveling legs fully adjusted 47 1/4” (120.0 cm) 30 3/4” (78.1cm) 22” (55.9 cm) 24 3/8” (61.6 cm) 26 7/8” (68.3 cm) 24 3/8” (61.
7 ASSEMBL Y 1. Scr ew the black faucet knob onto the faucet. 3. Attach the clear beverage line coming from the draft tower to the keg coupler . Use the black washer inside the hex nut and tighten securely with crescent wrench. 5. Attach one end of the red air hose to the hose barb on the CO 2 regulator , using one of the two snap clamps provided.
8 CO 2 REGULA TOR 1. Low pressur e gauge. (reads the amount of internal keg pressur e) 2. Adjustment lock nut. 3. Regulator adjustment screw (after keg is tapped, screw clockwise until low pressur e gauge indicates between 12 & 14 lbs.) 4. Shut-off valve.
9 T APPING PROCEDURES 1. Align lug locks on tavern head with lug housing in top of key; insert tavern head. 2. T ur n tavern head handle 1/4 turn clockwise; the taver n head is now secured to keg. 3. Rotate on/of f valve handle 1/4 turn clockwise to open beer and CO 2 ports in keg.
10 DRAIN HOSE AND CONT AINER Before using the beverage dispenser , make sure the drain hose and container ar e properly installed. 1. Attach the hose to the drain. 2. Attach the container to the hose. 3. Empty the container when it becomes full. 4. Rinse both the hose and container before r eattaching to the beverage dispenser .
11 OPERA TING INSTRUCTIONS SETTING THE CONTROL NOTE: The contr ol is factory set for the ideal draft beer temperature - 38 o F (3.3 o C). (T emperature setting may need adjustments depending on ambient temperature.) Initially set the cold control knob midway between the numbers.
12 HOW TO DRA W THE PERFECT GLASS OF BEER 1. Start with a clean beer glass that has been wetted in cold water . Place the glass at a 45 o angle, one inch below the faucet. Do not let the glass touch the faucet . . Open the faucet all the way . 2. After the glass has reached half full, gradually bring the glass to an upright position.
13 ENERGY SA VING TIPS W ays to save power , save money , and still enjoy your beverage dispenser . •Reduce door openings. •Close the door as soon as you can. •Keep the coils on bottom of the refrigerator clean. •Adjust the temperature contr ol to a war mer setting when practical.
14 SERVICE INFORMA TION It is assumed that your beverage dispenser has been properly installed in accor dance with all specifications and local codes. If your beverage dispenser should fail to operate, review the common draft pr oblems before calling for service.
15 PROFESSIONAL SERIES 24” W . BEVERAGE DISPENSER WARRANTY ONE YEAR FULL W ARRANTY Built-in/freestanding beverage dispensers and all of their components and accessories, except as detailed below* , .
Specifications subject to change without notice F1755F (PS0205VR).
An important point after buying a device Viking VRBD/VUBD 24" W. BEVERAGE DISPENSER (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Viking VRBD/VUBD 24" W. BEVERAGE DISPENSER yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Viking VRBD/VUBD 24" W. BEVERAGE DISPENSER - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Viking VRBD/VUBD 24" W. BEVERAGE DISPENSER you will learn all the available features of the product, as well as information on its operation. The information that you get Viking VRBD/VUBD 24" W. BEVERAGE DISPENSER will certainly help you make a decision on the purchase.
If you already are a holder of Viking VRBD/VUBD 24" W. BEVERAGE DISPENSER, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Viking VRBD/VUBD 24" W. BEVERAGE DISPENSER.
However, one of the most important roles played by the user manual is to help in solving problems with Viking VRBD/VUBD 24" W. BEVERAGE DISPENSER. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Viking VRBD/VUBD 24" W. BEVERAGE DISPENSER along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
