Instruction/ maintenance manual of the product F20518A Viking
Go to page of 14
Viking Range Corporation 111 Front Str eet Greenwood, Mississippi 38930 USA (662) 455-1200 For product information, call 1-888-VIKING1 (845-4641) or visit the Viking Web site at vikingrange.
IMPORT ANT 3 – Please Read and Follow T able of Contents W arnings & Important Safety Infor mation _______________________________________________3 Dimensions (30”W .) __________________________________________________________________6 Specifications (30”W .
5 DANGER Electrical shock hazard. T o avoid risk of electrical shock, personal injury or death; verify your appliance has been properly grounded in accordance with local codes or in absence of codes, with the National Electrical Code (NEC). ANSI/NFP A 70-latest edition.
Specifications (30”W .) 7 Dimensions (30”W .) 6 Built-In 30“W . Gas Oven Description VGSO100 Overall width 29-1/2” (74.9 cm) Overall height 31” (78.7 cm) Overall depth from rear T o edge of door—24-7/8” (63.2 cm) T o end of handle bracket—27-3/8” (69.
Specifications (36”W .) 9 Dimensions (36”W .) 8 2 7 - 3 / 8 ” ( 6 9 . 5 c m ) 3 3 - 3 / 4 “ ( 8 5 . 7 c m ) 1 1 - 7 / 8 “ ( 3 0 . 2 c m) 3 5 - 1 / 4 ” ( 8 9 . 5 c m ) 2 3 ” ( 5 8 . 4 c m ) 2 2 - 1 / 2 ” ( 5 7 . 2 c m ) 2 5 - 1 / 4 ” ( 6 4 .
Electrical outlet to be located in shaded area on rear wall 2 4 ” ( 6 1 . 0 c m ) m i n . 24” (61.0 cm) min. 2 4 ” ( 6 1 . 0 c m ) m i n . 3 3 - 7 / 8 ” ( 8 6 . 0 c m ) D i m e n s i o ns s am e as b e l o w Dimensions same as below D i m e n s i o ns s am e as b e l o w 3 ” ( 7 .
Electrical & Gas Requir ements (cont.) 13 Pressur e Regulator: • All heavy-duty , commercial type cooking equipment must have a pressur e regulator on the incoming service line for safe and efficient operation, since service pr essure may fluctuate with local demand.
15 2 1 2 3 2 2 1 Open door completely . Place pin in pin hole. Note: T wo pins included. Remove hinge trim screws. T ake off hinge trim. 4 5 Close until pins stop door . Lift door up and out. Note: Do not lift door using handle. NOTICE DO N O T us e th e h an d le o r ov e n do or t o li f t th e ov e n.
17 1 2 Remove racks. Unscrew pallet scr ews from side of oven. 3 4 Lift oven into position. Push oven straight into cabinet. 5 6 Attach screws to the side of the framing. Note: Four screws (two on each side). (Screws not included.) Replace racks. Final Installation (30”W .
19 1 2 2 20° 1 2 Open door approximately 20°, then slowly pull upward until the door stop pops out of door socket. Gently close until the door rests against one of the stop notches. 3 Slide door completely from hinge arms. Door Removal (36”W .) NOTICE DO N O T us e th e h an d le o r ov e n do or t o li f t th e ov e n.
21 1 2 3 4 5 6 Final Installation (36”W . Single) Lift oven into position. Push oven straight into cabinet. Remove all knobs, push buttons, and bezels on the right control panel. Remove lower access panel, side trim, and control panel. Insert four wood screws, (included with the oven), through the cabinet side flange into the cabinet.
23 7 8 1 3 2 9 10 Connect gas line and check for leaks. 1 1 12 Final Installation (36”W . Double) (cont.) Remove all knobs, push buttons, bezels, and lower access panel, side trim, and control panel. Remove control box, disconnecting the three harness connectors.
25 Final Pr eparation 1. Some stainless steel parts may have a plastic protective wrap, which must be peeled off. All stainless steel body parts should be wiped with hot soapy water and with liquid cleaner designed for this material.
27 Service & Registration Only authorized replacement parts may be used in performing service on the appliance. Do not repair or r eplace any part of the appliance unless specifically recommended in the manual. All servicing should be referr ed to a qualified technician.
An important point after buying a device Viking F20518A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Viking F20518A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Viking F20518A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Viking F20518A you will learn all the available features of the product, as well as information on its operation. The information that you get Viking F20518A will certainly help you make a decision on the purchase.
If you already are a holder of Viking F20518A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Viking F20518A.
However, one of the most important roles played by the user manual is to help in solving problems with Viking F20518A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Viking F20518A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
