Instruction/ maintenance manual of the product Q7 Viking Access Systems
Go to page of 50
I N S TA L L AT I O N INSTRUC TIONS AND SAFET Y INFOR MA TION FOR THE VIK ING Q - 7 GA TE OPER A T OR CLASS II, CLASS III, AND CLASS IV Heavy-Duty Commercial Vehicular Slide Gate Operator.
THE V IKI NG Q- 7 ™ S LID E GA TE OPE R A T OR The Q-7™ gate operator has the capacity to operate slide gates up to 7000 lbs. and 120 ft. in length at 100% duty cycle under extreme conditions. This effi cient operator provides a solution for high traffi c commercial and industrial slide gate applications.
Q- 7 V ehicular Gate Ope rat or • Re vision Q7NXMN1 0.E • December 20 13.
VIKING TECHNICAL SUPPORT 1.800. 908.088 4 2 P ARTS DIA GR A M : Item Description Part No. 1 Chassis V AQ7CH10 2 Chassis T op Cov er V AQ7CHT C10 3 Q7 Cov er Lock (2) V AQ7CL 4 Chassis Fr ont Cov er V .
VIKING TECHNICAL SUPPORT 1.800. 908.088 4 3 OPER A TOR REFERENC E S: 1 . FRONT C OVER 2 . C OVER L OCK (2) 3. T OP CO VER 4. L OOP RA CK for c onvenient loop de tect or installation 5. VFLEX C ONTROL BOARD 6. MO TOR BREAKER rese table; protec ts the motor cir cuitry 7.
VIKING TECHNICAL SUPPORT 1.800. 908.088 4 4 C ONTROL BO A RD REFERENCES: 1. POWER HARNES S C ONNECT OR pro vides pow er to the contr ol board. pg 18- 19 2. “OPEN LEFT” & “OPEN RIGHT” pro vides pow er to the motor . pg 20 3. LIMIT SETUP BUTTONS sets limit positions.
VIKI NG TEC HNIC AL S UPPO RT 1. 800.908 .088 4 5 P ARTS DIAGRAM/P ARTS LIST 2 O P E R A T O R R E F E R E N C E S 3 CONTROL BOARD REF ERENC ES 4 I M P O R T A N T S A F E T Y I N F O R M A T I O N 6 .
VIKING TECHNICAL SUPPORT 1.800. 908.088 4 6 IMPORT A NT SAFET Y INFORMA TION ! W AR N IN G! Not Following t hese in stru ctio ns may ca use severe injur y o r death . IMPORT ANT SAFE TY INSTRUCTIONS ! W AR N IN G! T o re duce the ri sk of severe injur y or d eath .
VIKING TECHNICAL SUPPORT 1.800. 908.088 4 7 IMPORT A NT SAFET Y INFORMA TION ! W AR N IN G! Not Following t hese in stru ctio ns may ca use severe injur y o r death .
VIKING TECHNICAL SUPPORT 1.800. 908.088 4 8 IMPORT A NT SAFET Y INFORMA TION ! W AR N IN G! Not Following t hese in stru ctio ns may ca use severe injur y o r death .
VIKING TECHNICAL SUPPORT 1.800. 908.088 4 9 ! C AU TI O N : T o Reduce th e Risk of Fi re or Inj ur y to Perso ns: IMPORT A NT SAFET Y INFORMA TION a. Use on ly the following t ype an d siz e b atter y(ies ): Y uas a NP7 -12 or VIK IN G DU BA 1 2 b. Donotdi sposeoftheb atter y(ies )i nre.
VIKING TECHNICAL SUPPORT 1.800. 908.088 4 10 IMPORT A NT SAFET Y INFORMA TION NOTE: T his t ype on in sta llation DOES NOT reverse th e gate all th e way back to its li mits wh en the p hoto bea m is obs truc ted. T his in stall ation is o nly to protec t aga inst e ntrapm ent an d to comply with U L 325 .
VIKI NG TEC HNIC AL S UPPO RT 1. 800.908 .088 4 11 NOTE: T his t ype on in sta llation DOES NOT reverse th e gate all th e way back to its li mits wh en the e dge se nsor i s obstr uc ted. Th is ins tall ation is on ly to protect aga inst e ntrapm ent an d to comply with U L 325 .
VIKING TECHNICAL SUPPORT 1.800. 908.088 4 12 IMPORT A NT SAFET Y INFORMA TION ! W AR N IN G! Not Following t hese in stru ctio ns may ca use severe injur y o r death .
VIKING TECHNICAL SUPPORT 1.800. 908.088 4 13 ! C AU TI O N : T o Reduce th e Risk of Fi re or Inj ur y to Perso ns: ! W ARNING: For use wit h gates at a ma ximum 700 0 lbs . in weight o r 120 f t . in le ngth . IMPORT A NT INST ALL A TION INF ORMA TION 7000 lb.
VIKING TECHNICAL SUPPORT 1.800. 908.088 4 14 G AT E O P E R AT O R I N S TA L L AT I O N Concre te Pad Installation 1 . Follow the loc al buil ding cod e to det e rmine th e require d depth of the co n cre te p a d .
VIKING TECHNICAL SUPPORT 1.800. 908.088 4 15 Positiv e Stop Installation G AT E O P E R AT O R I N S TA L L AT I O N ! IMPORT ANT : This operator R EQUIRE S that a positive st op be installed a t the close position .
VIKING TECHNICAL SUPPORT 1.800. 908.088 4 16 Operat or Positioning ! I M P O R TA N T: All openi ngs of a horizontal slid e gate are gua rded or sc reene d from the b ot - tom of the gate t o a m inimum of 4 fe et ( 1 . 2 2 m ) above t he grou nd to prev ent a 2-1/2 inch (57 .
VIKING TECHNICAL SUPPORT 1.800. 908.088 4 17 ! TECHNICAL TIP: B efore comp leting the in stallatio n procedu re; • Openandclosethegatemanually,makingsurethereissufcientspacebetweenthegate and adjacent walls.
VIKING TECHNICAL SUPPORT 1.800. 908.088 4 18 High V oltage Suppl y Option ! Caution : Always turn off p ow e r breakers wh en workin g with high v oltag e. D O N OT conn ec t the “ Pow e r Har ness ” to t h e Control B oard until the el ectric al in stallatio n is comple te and r eady for v erificat ion .
VIKI NG TEC HNIC AL S UPPO RT 1. 800.908 .088 4 19 A Solar Sup ply Option ! IMPORT ANT : The num ber of cycles a chieved daily is de pen dent o n many fac tors , inclu ding lo cal so lar ra diation data a nd pow er consump tion o f the mo tor and access ories .
VIKI NG TEC HNIC AL S UPPO RT 1. 800.908 .088 4 20 LIMI T S SETUP STEP 2 Move t he gate to the desired cl ose position the n press a nd ho ld the “Clo se Limit ” b utton until the LED is so lid. STEP 3 Move t he gate to the desired o pen posi tion then press and hold the “Open Limit ” b utton until the LED is so lid.
VIKI NG TEC HNIC AL S UPPO RT 1. 800.908 .088 4 21 LIMI T S SETUP T o Readjust the Close Limit: 1 . Clea r the current li mit setting by hol ding down the “Cl ose Limit ” b utton until the LED is f lashi ng. 2 . Repe at STEP 2 o n page 2 0 t o set the limit .
VIKING TECHNICAL SUPPORT 1.800. 908.088 4 22 T w o Wir e Communi cation ! IMPORT ANT : DO NOT run the Ma ster /Slave communi cation c able in th e sam e conduit or within 12 ” of 1 15 - 23 0v power supp ly cabl es . ! T echnical Tip : DO N O T set th e “Ti mer ” an d/ or “Overla p” features o n both ope rat ors Control B oards .
VIKING TECHNICAL SUPPORT 1.800. 908.088 4 23 Wireless Com munic ation O ptions ! T echnical Tip : DO N O T set th e “Ti mer ” an d/ or “Overla p” features o n both ope rat ors Control B oards . Only tu rn these fe atures on at the M aster Co ntrol Board .
VIKI NG TEC HNIC AL S UPPO RT 1. 800.908 .088 4 24 Initial Setting s C ONTR OL BO A RD SETUP “Timer ” Hold Open Timer Automatically clos es the gate af ter the sel ec ted amou nt of time from 1 - 60 seco nd s . T urn ing the dia l betwee n “0 ” and “ OFF” will disa ble this featu re, requiri ng a close comm and to close the g at e.
VIKI NG TEC HNIC AL S UPPO RT 1. 800.908 .088 4 25 Initial Setting s NOT E: I nstall ing a shu nt or jump er on th e pins will ac tivate t h e feature. C ONTR OL BO A RD SETUP “S ync” Use d only in con junc tion with the Viki ng Ba rrier g at e ope rator mode l B-12 .
VIKI NG TEC HNIC AL S UPPO RT 1. 800.908 .088 4 26 Obstruct ion Sensor ( Primar y Entrapment Pro tection ) ! IMPORT ANT : The app ropriate “ODS” s etting is de pe ndant u pon the g ate installatio n and co nstruc tion . Set this fe ature accordingly.
VIKI NG TEC HNIC AL S UPPO RT 1. 800.908 .088 4 27 C ONTR OL BO A RD SETUP HEATER CLS ON LOCK MOD ON Viking Heater The op erator ha s an integrated he at er that is th ermos tatically controlle d. Ac tivat e this feature whe n the op erator is used i n applic ation temp eratures down to - 20° F ( -29°C ).
VIKING TECHNICAL SUPPORT 1.800. 908.088 4 28 (THIS P AGE LEFT BL ANK INTENTIONALL Y).
VIKING TECHNICAL SUPPORT 1.800. 908.088 4 29 Re - Open Pho to Beam ( vehic ula r Safety ) NOT E: Thi s typ e of photo-b eam in stall ation will stop then R E-O PEN th e gate all the wa y to the open li mit, whe n the bea m is obstru cted . Intend ed for vehicul ar safet y ON L Y .
VIKI NG TEC HNIC AL S UPPO RT 1. 800.908 .088 4 30 Radio Receiv er ( T ypical) ! IMPORT ANT : The Hol d Ope n “ Timer ” set ting (pag e 24 ) af fec ts h ow t he gate will respo nd to the radio rece iv er com man d.
VIKI NG TEC HNIC AL S UPPO RT 1. 800.908 .088 4 31 Anti- T ailgate, Open Commands & G uard Station ! TECHNICAL TIP: For more inf ormation regardin g acc essor y c onn ections and termi nal fu nctio ns, refe r to “ App endix (A)” on pages 42-43 .
VIKING TECHNICAL SUPPORT 1.800. 908.088 4 32 Viking Loop Rac k TIP: This op erator may be eq uippe d with a pre-wired Lo op Rac k that plug -in typ e loo p detec t ors c an be co nne cted to. This provides a convenient a lternativ e to the box typ e loo p detectors that woul d nee d to be wired to t he control bo ard.
VIKING TECHNICAL SUPPORT 1.800. 908.088 4 33 Guidelines for Loop Installation Table C - Recommended Number of Turns Perimeter (ft.) Number of Turns 10 5 20 4 30-40 3 50-100 2 A C CESSORY C ONNE CTIONS 1 . Prev e nt sharp co rner s in the ge ometr y of the loo p senso r .
VIKI NG TEC HNIC AL S UPPO RT 1. 800.908 .088 4 34 Magnetic Lock , Lock Soleno id NOT E: Vi king Access Syst e ms do es not provide externa l gate lock devices . Thes e it ems ca n be purch ased f rom your deal er or di stributor . A C CESSORY C ONNE CTIONS Pow er for the Locks: Do not u se the 24 VD C power suppli ed by the control board.
VIKING TECHNICAL SUPPORT 1.800. 908.088 4 35 Barrier Arm ( B - 12) S ynchronization Option NOT E: Th e Control Bo ard provides a conv e nient s olution for a pplic ations that req uire synch roniz ed op eration with the Vik ing Ba rrier A rm Op erator mod el B-12 .
VIKING TECHNICAL SUPPORT 1.800. 908.088 4 36 LED Referenc es In ad dition to the L C D Displ a y , the control bo ard LEDs m onitor the variou s circuits of the control boa rd. Use the t able b elow to identif y the corresp ond ing “ TS Ref# ” a nd refer to page 38- 4 1 for fur ther t roubleshooting.
VIKING TECHNICAL SUPPORT 1.800. 908.088 4 37 LED Referenc es Use the ta ble b elow to identif y the corresp ondi ng “ TS Ref# ” an d refer to page 3 8 -41 for fur ther t roubleshooti ng. TROUBL ESHOOT ING # LED Status Meaning Pg 41 TS R ef#(s ) 9 “C Loop” OFF Normal Condition.
VIKING TECHNICAL SUPPORT 1.800. 908.088 4 38 TROUBL ESHOOT ING Call out LCD Display, Diag- nose Button and Diag- nose LED LCD MSG Meaning Page 41 TS Ref #s VIKING ACCESS Welcome Message MODEL Q7 Indic.
VIKING TECHNICAL SUPPORT 1.800. 908.088 4 39 TROUBL ESHOOT ING LCD MSG Meaning Page 41 TS Ref #s SEARCH POS STOP Needs to search for the Positive Stop, that has been installed at the close position, in order to use as a reference for the limits after manual operation.
VIKING TECHNICAL SUPPORT 1.800. 908.088 4 40 TROUBL ESHOOT ING L CD Dis pla y Reference s LCD MSG Meaning Page 41 TS Ref #s Err or Messages ERR AC LOW Indicates that the 24VAC supply to the VFlex Board is too low from the 115/230 power supply.
VIKING TECHNICAL SUPPORT 1.800. 908.088 4 41 TROUBL ESHOOT ING Soluti ons Be gin the troubl esho oting process by referring to the er ror mess ages o n the L CD Displ ay and/ or the Status LE Ds on the control bo ard. U se page s 36 -4 0 to identif y the T rou blesh ooting Refere nce # ( TS Ref#) then refe rence the t able b elow .
VIKI NG TEC HNIC AL S UPPO RT 1. 800.908 .088 4 42 A cc ess Control C on nections Appe nd ix ( A ) Pow er Connections The control bo ard provides a 24 VD C output to power external d evices and controls .
VIKING TECHNICAL SUPPORT 1.800. 908.088 4 43 Rela ys In General NOT E: Vi king Access Syst e ms do es not provide the externa l safet y devices and a ccess controls .
VIKI NG TEC HNIC AL S UPPO RT 1. 800.908 .088 4 44 Common Radio R eceiv ers - Connections Appe nd ix ( B) Common Radio R eceiv ers - Connections Appe nd ix ( B).
VIKING TECHNICAL SUPPORT 1.800. 908.088 4 45 Solar Applications NOT E: Vi king recom men ds Sol ar Packa ge ( pa rt # V A- SOCH P ) for most ge nera l solar app lications . Altern ativ e ly , individ ual a nd third par t y sola r compo nent s can b e used .
VIKING TECHNICAL SUPPORT 1.800. 908.088 4 46 VIKING EXP A NSION PROD UCT S VIKING SOL AR KIT The comp one nts in clude d in this pa ckage are intend ed to pro vid e suf fici ent power for ge nera l applic ations .
Viking Access Systems is continuously working hard to identify and design products that will appeal to the industry and its needs. As technology continues to advance, we have developed a completely effi cient and intelligent line of gate operators to meet the changing demands.
VIKI NG A CCES S SY STE MS 63 1 W ald Ir vine, C A 9261 8 Phone 8 0 0.9 0 8. 08 8 4 F ax 949.753 .16 40 ww w . vikingacc ess .com ST A ND ARD FE A TURE S AND OPER A T OR SPE CIFICA TIONS INST ALLA TIO.
An important point after buying a device Viking Access Systems Q7 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Viking Access Systems Q7 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Viking Access Systems Q7 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Viking Access Systems Q7 you will learn all the available features of the product, as well as information on its operation. The information that you get Viking Access Systems Q7 will certainly help you make a decision on the purchase.
If you already are a holder of Viking Access Systems Q7, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Viking Access Systems Q7.
However, one of the most important roles played by the user manual is to help in solving problems with Viking Access Systems Q7. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Viking Access Systems Q7 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
