



QUICK START
time. When fully charged, a green indicator light will display on
the gTablet (shown below).
power button (shown below).
you through a quick setup process with 4 easy steps including the
end user license agreement, setting the date and time, setting up
your wireless network, and configuring user profiles.
For additional detailed instructions on set up, see section 2 “Getting
Started” in this document. ICONS
gTablet and to avoid improper operations.
general knowledge and references which are important to note. Other trademarks and trade names may be used in this manual to refer to either the entities claiming the marks and names, or their products. The manufacturer disclaims any proprietary interest in trademarks and trade

names other than its own. Information in this manual is subject to change without notice. Product images in this manual are for your reference only.
Reproduction without the written consent from the manufacture is
strictly prohibited. For Customer Service, please visit www.viewsonic.com/gtablet.


12-1 Connect a micro SD Card 60
12-2 Connect to PC 61
12-3 Connect an Audio Device 61
12-4 Connect a USB Device 61 13 CARING FOR YOUR G TABLET 61 14 SAFETY PRECAUTIONS 63 15 FCC COMPLIANCE 63 16 TROUBLESHOOTING 64 17 SPECIFICATIONS 65


3. HOME
4. MENU
5. BACK



Right Edge

2 GETTING STARTED 2-1 Connecting the Power Adapter The gTablet comes with a universal AC-DC adapter. The allowable input voltage of adapter is from 100V to 240V. Follow the below steps to connect the adapter: 1. Connect the piece with the plugs to the power cord. 2. Plug the DC end of adapter into the power jack of the gTablet. 3. Insert the AC end to the wall outlet. 4. Check the connections above before turning on the gTablet.

Your gTablet and the accessories may differ from the pictures shown.

2-2 Setting Up Your gTablet Turning the gTablet ON for the first time
You must fully charge your gTablet before using for the first
time.

When fully charged, a green indicator
light will display on the gTablet (shown in
gTablet Key Map section). Once green
indicator light is on, turn system on by
pressing the power button (shown in
gTablet Key Map section).
When the gTablet powers on, the Welcome Screen below will appear.
There are 4 easy steps to follow for initial setup.

End User License Agreement
Agreement screen will appear. Review this and tap the “Accept”
button. After tapping on the box “I have read and agree…” (1), tap
on the “Next” button (2).
Welcome Screen


Location, Date and Time
“Next” (2).

ng Up Your Wireless Network – Wi-Fi and Networks
set up your wireless network, and the following screen will appear.

Setti

The available networks will automatically be displayed. If your network is
visible, select your network. You will be prompted to input your
password.

have to add it manually by following the instructions under the “System
Settings” section and “Wireless & Networks”.
Once you have put in your password, the gTablet should recognize and
connect to your network. If it does not, try this process again by tapping
on “Previous” to go back. If problem persists, contact your internet
service provider or visit www.viewsonic.com/gtablet.
Setting Up User Profiles
your user profiles. User profiles allow multiple people to use the
device so that personal email accounts and to do lists can be
accessed, modified and used without affecting other user‟s data.
The “Family” profile (or a group profile) is to be used by all. You also
have the option of setting up 6 individual profiles (1).


2-3 ON, OFF, and Sleep Turning the gTablet On In order to turn the gTablet ON from an Off state, you must hold the power button for about 2 seconds. To turn the gTablet on from “Sleep” mode, simply press the on button. Turning the gTablet Off In order to turn the gTablet off completely, you must hold the power button
down for about 2 seconds. A menu will appear. Select “Power Off”.
This is important when traveling with the device, or when the tablet is not
in use for extended periods of time, and to save battery.

Sleep The most common mode for frequent and daily use for the gTablet is to
put the system into ”Sleep” mode. This save battery and requires a
much shorter boot up time. To put the tablet in sleep mode, simply press
the power button briefly. To turn the gTablet on from the sleep mode,
also briefly press the power button.

The Updates application allows your tablet to receive the latest
version of the tablet software. This application runs
automatically and will always prompt you before any updates
are downloaded, allowing you to decline the update. Also, no personal
information is ever tracked. The only information sent is the network
adapter number and application version / revision numbers.
To access this application manually, find the “Updates” icon on the Home
screen by tapping on the “Menu” icon in the bottom right corner of the
screen. This brings up the Over the Air Updates application. If there
are updates available, follow the instructions to download when you are
ready.
applications which you have downloaded and you will need to
reinstall them.
It is important that the gTablet be fully charged before
downloading updates. Furthermore, you should ensure you
have a strong Wi-Fi signal to minimize the download time.
Tap on “Download Update”


Review and accept the End User License Agreement.

Wait for download to complete. The progress will be shown on the indicator bar.

Once download is complete, you will have the option to “Apply Update” or “Postpone”. Applying Update will reboot the tablet.


You can also visit the gTablet website for additional information and
online documentation. http://www.viewsonic.com/gtablet 4 IMPORTANT BUTTONS On the right side of the LCD Screen there are 4 buttons.

Home screen will bring up the Google search web site.
either the Home screen or the Dashboard depending
on which screen you were last in.
options based on the application running at the time.
back to the previous window displayed.
The “House” icon (1), will bring you back
to either the Home screen or the Dashboard
depending on where you were last. This
icon is not always visible with certain
applications. For example when using the internet, it will not be visible.
The “House” icon (3) on the right side of the LCD screen works the same

– taking you back Home or to the Dashboard depending on where you
were last. The current page name is displayed next to the “House” logo
(2).
4-2 Task Bar – Top Right At the top right are a row of icons displaying the system time, Alerts, current battery power remaining, and your wireless connection. By touching on any of the Wi-Fi, Battery, or Alerts icon, you can get additional information and settings for each of these functions. 5 GET TO KNOW THE HOME SCREEN The gTablet‟s Home screen is a traditional Android user

Time Alerts Battery Wireless
interface commonly used on Android cell phones. To
access the Home screen from any application, tap
on the “Home” button on the right side of the LCD screen (1).
Please note that this button toggles between Home and the
Dashboard depending on where you were last. You may also tap on the
“Home” icon in the bottom right of the Dashboard screen (see section on
Dashboard).


5-1 Quick Launch Bar On the right of the Home screen, there are 5 icons (visible from each of the 5 Home screens). These include web, mail, menu, settings, and Dashboard (1). By tapping on these icons, you will instantly be taken to the application or feature.
Web – takes you to your Internet home page. By default, it is se up to go directly to Google.
Mail – takes you to the email application.
Applications Menu – opens up the Android menu screen where all of your applications and features are listed.
Settings – opens up the settings menu for the GTablet. Dashboard – takes you directly to the Dashboard. Customization
The Home screen has 5 screens that are customizable. To access these additional screens, swipe left and right with your finger. These pages allow you to conveniently view your favorite applications by dragging and dropping them on the preferred screen. To identify which screen you are on, in the bottom left and bottom right corners of the Home screen are dots that represent the number of pages remaining to the left and number of pages remaining to the right of the screen you are on.
Features

Long tap – the long tap is done by touching the screen and
holding your finger still on an icon for about 2 seconds. This
action can often bring up different options.
Menu – Long tapping on an open space on the Home screen will
bring up a menu option which allows you to add Shortcuts,
Widgets, and Wallpapers.
Moving an icon – You can move an icon from the applications
menu to the Home screen or vice versa. Simply long tap the
icon by holding down for 2 seconds. When the icon lifts off the
page, drag and drop it to the location desired.
Trash can – By long tapping an icon sitting on the Home screen,
the trash can will appear on the right side of the screen. From
here you can drag and drop the icon into the trash can. This will
remove the icon from the Home screen but still keeps it in your
Applications Menu.
6 GET TO KNOW THE DASHBOARD The gTablet‟s Dashboard screen is a user interface that
enables user customization. To access the Dashboard from
the Home page, tap on the window pane icon.
You may also tap on the “Home” button on the right
side of the LCD Screen (1). This icon toggles between Home and
Dashboard depending on which interface you use last.


6-1 Dashboard Portlets – Main Window The Dashboard screen has 3 portlets that are customizable. These windows allow you to conveniently view your favorite applications. Customizing To customize these portlets, select an application along the bottom of the Dashboard from the Applications Task Bar. Tap and hold the icon for about 2 seconds. When the icon lifts off the page, drag and drop into the portlet that you want the application displayed. Applications such as Weather, News, Clock, Photos, Music, Calendar, among others, work with this feature. Note though, that not all applications do, and when they don‟t, the display will provide the feedback that the chosen application cannot be dropped in a Portlet. With in these applications that you can display in the portlets, some require that you make additional selections. For example, with Photos. You will need to select which photo album you want running in the window by going into the Photo application and under settings, choosing a photo album using the drop down menu. See the Photos section for more information. Multiple Dashboard Screens The Dashboard has 3 different screens identifiable by the background color. The screens are blue, black and gray. To access these screens, simply touch the screen and swipe either left or right with your finger. Each of these screens will allow you to populate the three portlets. 6-2 Applications Task Bar - Along Bottom Along the bottom of the Dashboard, you will find as many as twelve icons for applications. To display all icons in an expanded view, tap the “More” icon on the very right. You can easily customize the order of these icons so that your favorite or most used are visible at all times from the Dashboard. Do this by tapping on the icon and holding (for about 2




seconds), then drag and drop into the position you want it displayed. As you add applications or buy them, they will be displayed here in the Applications Task Bar expanded view under the “More” button. 7 APPLICATIONS Applications Menu

All applications can be accessed from both the Home screen and the
Dashboard. To access your applications from the Home screen, tap on
the “Applications Menu” button from the Quick Launch Bar to
the right of the screen.

On the Dashboard, the applications task bar is located along the bottom
(2). This is where all of your applications will be easily accessed and are
each represented with an icon. Note that you can drag and drop the
icons to arrange them in the order you prefer.

Following is a quick review of the applications that came pre-loaded on
your gTablet. 7-1 News Tapping on the “News” icon visible from the Home Applications Menu and
the Dashboard, brings up the News application in full screen. Here you
will see short snippets of the current news constantly being
updated as news is created. This main page is the “Top Stories”
screen.

“Top Stories” screen includes the title, news agency who wrote it,
and a blurb for each story in the news.
You can use your finger to scroll up and down on the screen.
By tapping on any one of the news snippets, it will bring up the
entire article.
Across the top, there are tabs including Top Stories, US, World,
Entertainment, etc. (1). These tabs are customizable under the settings
button in the top right corner (gear icon) (2). The refresh button (3)
which updates your screen to real-time is also located on the right next to
the settings button.


Under settings, you can choose the “Categories” that appear at the top of
the news headline page.
Under settings, you can also customize your Dashboard portlets (1).

This application runs in the large portlet window of the Dashboard. You
are able to select which news categories appear in the large window as
well as the 2 smaller windows. To do this, tap on the drop down menu
beside each window make your selection (2). Be sure to drag and drop
the “News” icon from the applications Task Bar into the portlet window
(this is from the Dashboard). Then you are able to choose which news
category is displayed in that portlet.


By tapping on the “Advanced” tab, you are able to select how often
updates for news will happen. Note that the more frequent updates are,
the more it uses up battery power. You can select between 15 minutes
to 1 hour intervals. 7-2 Weather Tapping on the “Weather” icon will bring up the Weather page full screen. This application is customizable allowing you to select your location, or multiple locations (1), and shows the forecast for today, hourly and for the week (2). By tapping on settings (gear icon) (3), you will be able to input your location/s, and customize your Dashboard portlets with multiple weather locations. Under settings you can input multiple locations or cities. Tap on “Add a new location” (1). Then type in the ZIP code or a city and state in the US and tap search (2). Once you have added all of your cities, tap on the “Portlets” tab in the top right (3).



Under the “Portlets" window (1), you will select 3 locations using the drop down menus. Remember, from the Dashboard screen, you must drag and drop the “Weather” icon into the portlet you wish to view the weather in. 7-3 Web Tapping on the “Web” icon will bring up the internet. If you set up your wireless internet connection during the setup process, you will instantly go to your internet home page. The default home page for the gTablet is www.google.com




If you see the below screen, then you do not have an internet connection. Please refer to the section System Settings, under “Wireless & networks”. By tapping on the “Settings” button (gear icon) (1) at the top right of the internet page, the “Web Settings” screen will appear. This screen allows you to set your default internet home page, manage your content and security settings.





Tapping on the “Clock” icon will bring up the Clock, Alarm, and Timers function. Clock To set the time, touch the clock face and “Set Clock” will appear. Select your time zone and save. The master time is set in the System Settings under “Location, date & time”. To add additional clocks (up to 4), tap on the clock “+” symbol in the bottom left hand corner of the screen (shown as 1 above).




Select the time zone by tapping on the clock, as previously described. Delete the clock by tapping on the clock and selecting “Delete”. Note the first clock on the left will act as your primary clock – for example, if a clock is used in the Dashboard portlets screen. Alarms Under the “Alarms” tab, you are able to manage your current alarms and set alarms (up to 4). To set an alarm, touch the face of the alarm clock.

Input the time including AM or PM. (1) Make sure the “ON” button is green (not the OFF in black). Select your sound. (2) Select how often to repeat the alarm. (3) Tap on “Save” to save your alarm. (4)


Repeat this for as many alarms as you wish to set by touching the “Alarm +” button in the bottom left corner (shown at right). To delete an alarm, touch the face of the alarm clock you wish to cancel to bring open the “Set Alarm” window and tap on “Delete”. To simply turn off an alarm, tap on the “ON” button below the alarm clock and turn it to the “OFF” position. If it is ON, the button will be green. Timers Tapping on the “Timers” tab from the Clock page will bring up a digital timer. To set, touch the timer and the “Set Timer” window will appear. To set the timer, use your finger to scroll the hours, minutes, and seconds up and down (1). Under Label, you can name your timer (2). Then select your sound (3) and save (4).




You can add up to 4 timers by tapping on the “timer +” button in the bottom left corner of the screen (shown at right). 7-5 Contacts Add a Contact Tapping on the “Contacts” icon will bring up your contact list. To add contacts, you can both manually input contacts and / or import them in from your Google mail.


To add a new contact, tap on the “+” icon shown at right. Simply
fill out the necessary fields including Name, Numbers, Email,
Addresses, and / or a Photo. When complete, tap “Save”.


Importing contacts only works with a Gmail (Google email) account similar
to an Android based phone. To import contacts, tap on the icon shown
at right. You will be prompted to input your Google email
address and your password. Follow the steps on screen to
select the contacts you wish to import.

To search for contacts you can use the search bar (1) or tap on the letter
of the alphabet along the bottom of the contacts main page (2). Once you
have contacts, you can identify favorites by using the star function (3).

Import Contacts


family mode. All contacts listed will be accessible by anyone
who uses the device.
7-6 Email Tapping on the “Email” icon brings up your email. To add an email
account, tap on the “Add account” button (1). To manage email settings,
tap on the gear icon (2).

You will be prompted for your email address, Password, asked to select a
family member (set up during getting started under profiles), and provide
a name and description. You will also select how frequently you
download emails from 15 minutes to 1 hour. For security, you can select
“Only I can see my emails” (1). If you have multiple email accounts set
up (for example a personal account and a family account), you will always
be given the option to select which account you want to open. If you only

have one account, the application will open up straight to your email
account.

To compose an email, tap on the “Compose” button. (1)
To view other boxes, tap on “Inbox” and select from the drop
down menu – Inbox, Drafts, Outbox, Sent and Trash. (2)
To go back to the main email screen and view all accounts, tap on
“Accounts”. (3)
To refresh your screen, tap on the “Refresh” button. (4)

Tapping on the “To-Do” icon will bring up this application.
To-Do Lists are based on profiles. There is a “Family” To-Do
list set up automatically, and one for each profile.

To add an action (a to-do), tap on the “+” button and input the
item you wish to add to the list. (1)
You can email your To-Do List by tapping on the envelope. (2)
To delete an item, tap on the garbage can. (3)
To flag an item as important, tap on the flag. (4)
Once you have completed an item, check the box and the item
will be sent to the “Finished Items” List behind the “To-Do” list. (5)
To Set the due date, tap on “Set Due Date”. (6)

Use your finger to scroll the month, day and year up or down to set the
due date. Once you are done, tap on “Set Date”.


7-8 Grocery Tapping on the “Grocery” icon will bring up the application. With the
Grocery List application, you can create several lists and actually set up
favorites.

Tapping on the list in the background that you wish to view will bring it to the foreground. On each list, there is an “envelope” icon and a “trash can”. Use the “envelope” to email the list. Use the “trash can” icon to
delete the list. To add an item to the list, simply touch in between the lines on the lined paper. The onscreen keyboard will
appear. To add a list, tap on the “+” icon just above the first list (shown at right). Tapping on the settings button (gear icon) brings up the “Grocery List Settings” allowing you to remove items from the “Favorites”
list.
At the top right of the Grocery List screen are three tabs,
“Browse”.
“Favorites”, “Find”, and

Favorites – provides you a list of your most frequently used items
and is created automatically. Selecting an item will add it to the
Grocery List on top.
Find – allows you to start typing while it quickly suggests all of the
options allowing you to select the item without having to type the
entire name.
Browse – lists many grocery items by “Aisle” and in alphabetical
order so you can scroll through and select the items to add to
your list. 7-9 Calendar Tapping on the “Calendar” icon will bring up the application. This
application allows for multiple calendars including the “Family” calendar
as well as calendars set up for each profile. Note that all
calendars are accessible to all users on the gTablet.

To select the calendar you wish to view simply touch the profile
name on the left bar. (1)

Along the top left, you can advance days or go back using the left
and right arrows as well as tap on “Today” to instantly jump to
today‟s date. (2)
You can view your calendar in full screen for the Day, Week or
Month. (3)


To add an event, tap on the “+” button. (4)

Fill out the event title, select the time frame, set up a reminder
and the repeat frequency.
Use the “Settings” button (gear icon) to select your event
reminder tune, and to add an External Calendar. (5)
To “Add external calendar”, you can also tap on the “+” button on
the left bar of the main calendar screen. (6) This brings up the
Calendar Settings page.


You will be prompted to enter the address for the external
calendar.

7-10 Music Tapping on the “Music” icon will bring up the application. You are able to
buy music online using the gTablet and play your music with the “Music”
application. The easiest way to import your music is by using
the mini USB cable connected to your PC. Please refer to
section on Importing Files.

words, title, names, etc. within the “Music” application.
enabling you to find and select music. To play a song, simply
tap on the artist, then tap on the album you wish to hear, and tap
on the song to play.

name enabling you to find and select music. To play a song,
simply tap on the album, then select the song you wish to play.
order by songs enabling you to find and select music. To play a
song, simply tap on the song you wish to play.
in a row. You can import playlists in the same manner you
import songs.
While playing a song, the control panel will pop up displaying back,
forward, play / pause, replay, etc.
7-11 Photos Tapping on the “Photos” icon brings up the application. From the main

page you can view “All Photos” in albums, view photos on your SD Card,
and view your Picasa account. Note that Picasa is tied to
your Google account and only photos set to the public security
level will be displayed.


Under “All Photos”, after tapping on an album (1), your album pictures will
be displayed on the page.

Here, you can tap on any single photo (1) and that photo will come up
almost full screen. In this view, you can easily shuffle through your
album. If you double tap that photo, the photo will be displayed in full
screen. To view more photos, tap on the photos piled on the left or the
right. You can also slide your finger left and right pushing the images to
view the next image.

To rotate the image, tap on “rotate” in the top right corner. (1)
To email a photo, tap on the “envelope”. (2)
To delete a photo, tap on the “trash can”. (3)
To view in slideshow mode which automatically shows all photos
in your album, tap on the “Slideshow” button. (4)


In slideshow mode, tapping the “Settings” (gear icon) button will
enable you to select the transition style and the speed.
To add photos to your Dashboard and to add a Picasa account,
tap on the settings button in the top right corner from the main
photo page (1).
This brings up the “Photos Settings” screen. In the top right corner, you
can select “Picasa accounts” or “Home portlets”. To add a Picasa account tap on the “+” sign and follow the prompts

asking for your Picasa username (1). “Portlets” allows you to set which
albums are displayed in each of the 3 Portlets on the Dashboard. Tap

on the drop down menu to select which photo album you wish to display.
To enable this feature, you must also drag and drop the “Photos” icon
from the Dashboard into the Portlet you wish to display the album in. 7-12 Settings Tapping on the “Settings” icon will bring up the screen below. Settings

allows you to manage many aspects of your gTablet including your
wireless, audio, display, profiles, date, time, security, language,
etc. For detailed information on each of the categories in
“Settings”, please refer to the System Settings section.
7-13 Home Tapping on the “Home” icon from the Dashboard screen will take you to

the traditional Android home screen for the gTablet.

7-14 Dashboard Tapping on the “Dashboard” icon from the Home screen (located in the
Quick Launch Bar at right) will bring up the Dashboard which is an
alternative to the Home screen allowing for access to
applications and customization of the portlets. 7-15 More Tapping on the “More” icon (1) from the Dashboard screen will bring up
the expanded Applications Task Bar showing you all applications installed
on your gTablet.

7-16 Calculator Tapping on the “Calculator” icon will bring up a simple calculator.

7-17 Camera Tapping on the “Camera” icon will bring up the camera application.


The camera runs in still shot mode and video mode (1). Tap on
the “camera” button for still shot photos.
Tap on the round button on the bottom right to
take a picture (2).
To view photos taken, tap on the button in the
top right of the screen containing a snap shot (last photo taken)
(3). This will bring up the “Photos” application.
saved to your “Photos” application.

Tap on the video button to switch to the video application and
record motion video. (1)
Tap on the button on the bottom right to start recording video (2).
When recording, the button will turn red. To stop the video
recording, tap on the same button.
Camera Mode · Video Mode

To view videos taken, tap on the button in the top right of the
screen containing a snap shot (last video taken) (3). This will
bring up your videos. 7-18 ES File Explorer Tapping on the “ES File Explorer” icon brings up the file folder system
application.
Be very careful while in the ES File Explorer application as there are critical files for your gTablet to operate. Do not delete or modify anything you are not confident about.
ES File Explorer Tool Bar Buttons
3 1 2 4 5 6

Home button / Slash button(1) – This button toggles
between the “home” icon and the “forward slash” (/)
icon. The default screen that appears is the “forward
slash” (/) screen (which is the “sdcard” file folder open). It has 2
the ES File Explorer application (when the home icon is displayed
– icon at right) shows three important files – “sdcard”, “sdcard2”
and “usbdisk”.

File Folder + button (2) – allows you to select multiple
files at once.
Search files (3) – tapping on the search icon brings up
a search tool for searching files. Using keywords, search for a
video / audio file or an image file such as a photo.
File up (4) – moves to the previous screen or a level up in the file
tree.
Settings (gear icon) (5) – tapping on the settings button displays
the gTablets application list.
List icon (6) – tapping on the list icon shows the file explorer
window in columns. Tapping on it again displays the icons from
left to right.

“sdcard” File Folder (1) – Files in the “SD Card” folder (the default
folder, not “sdcard 2”) are files saved on the internal memory and
include the folders such as “DCIM”, and “Download”.
“sdcard2” File Folder (2) – Select the “sdcard2” to view data from
your micro SD card (external).
“usbdisk” File Folder (3) – Select the “usbdisk” to view data loaded
on your USB flash memory drive (external).

The “Slash” (/) screen is the “sdcard” file folder opened. This screen is
also the default screen to open up when you select “ES File Explorer”.
DCIM – file location for all saved photos taken from your camera as
well as videos taken on the gTablet.
Download – lists all of your applications downloaded from the
marketplace.
7-19 gMarket Tapping on the “gMarket” icon will bring up the handango Android
applications marketplace online where you can download free and paid
Android apps. Please see the gTablet Marketplace section of
this document on how to download an app from the marketplace.
7-20 Search Tapping on the “Search” icon will bring up the Google search engine and
the onscreen keyboard.
7-21 Sound Recorder Tapping on the “Sound Recorder” icon from the expanded Applications
Task Bar will bring up the sound recorder application allowing you to
record messages, etc.

Tap on the record button to start recording your message. (1) Tap on the play button to play your message back. (2) Tap on the stop button to stop recording. (3) Once you have your message, you can either “Use this recording”
or “Discard”.
To locate and play back these recordings, go to the “Music”
application.
Under songs, your recordings will be saved by the date and time
of the recording.
7-22 Updates Tapping on the “Updates” icon brings up the Over the Air automatic

update application. Here you can see what version your software is, and
manually run the update software. Please refer to the Over
the Air section for further details. 7-23 Videos Tapping on the “Videos” icon from will bring up all videos saved to your
gTablet. This application shows videos captured with the gTablet‟s
“Camera”.

7-24 Favorites Tapping on the “Favorites” icon from the Applications Menu takes you to
the Viewsonic website. Here you will find valuable information and links
that improve your experience such as important applications to
download, additional marketplace resources, etc. It is
recommended that you refer to this link periodically as the
information will change in order to keep the gTablet relevant.
7-25 Help Tapping on the “Help” icon takes you to the Viewsonic website where you
will find resources available to help you such as the users manual.
8 G TABLET MARKETPLACE Tapping on the “gMarket” icon takes you to www.handango.com which is
an online application store for Android software. This store has
thousands of Android applications available for free and to pay
for.
8-1 Downloading Applications To download applications from handango, simply follow the below
instructions:
icon from the applications menu. This brings up the
handango website.

most popular, or by price, or Free Apps, etc.
tap on download.
top corner next to the clock.
You will also find the application in the ES File Explorer under the
“download” folder.
9 IMPORTING AND ACCESSING FILES There are three methods for transferring and accessing files with the
gTablet, a mini USB cable connected to your PC, a USB flash memory
stick, and a micro SD card. The preferred method and simplest method
for importing files is the mini USB cable.
Mini USB Cable – Preferred Method for Importing Files
prompted to “Turn on USB storage”. On the gTablet, tap on “Turn on
USB storage” to proceed.
music, photos, or videos that you want loaded onto your gTablet listed
as a “Removable Disk” under “Computer” in Windows Explorer.
name

the gTablet.
applications menu – Videos, Photos, or Music and open up the
application.
it is oriented properly.
recognize the SD card and go through “preparing sd card” and
SD card by simply opening up the appropriate application.
If you have music loaded on the SD card, simply open up the “Music”
application to access these files.
remains inserted into the device.
“settings”, under “Storage”, and under SD card, tap on “Unmount SD
card”. Follow the instructions until it is safe to remove SD card.
Applications Task Bar).
bring up the “home” directory (once you have done this, the forward
slash icon will change to a home icon).
Micro SD Card · “scanning SD card” · USB Memory Stick

and hold for more than 2 seconds. A screen will pop up, tap on
“Copy”.
screen.
task bar. (icon at right)
on “Operations”.
10 ONSCREEN VIRTUAL KEYBOARD The gTablet is a touch screen LCD device. Therefore, the keyboard is
virtual and onscreen. The following information will assist in
understanding how to use the gTablet onscreen virtual keyboard.
Some applications open the keyboard automatically while others
will require you to tap inside the field where you wish to type.
This will bring up the keyboard onscreen.
For capital letters, touch the up arrow key on either side of the
keyboard (1). Touching the up arrow key again returns the
keyboard to lower case letters.
To bring up the numerical keyboard, on the “12” key to the left
and the right of the space bar (2).
Symbols are also on the same virtual keyboard as numbers.
Touching the “12” brings up symbols as well as numbers. Alphabetical Keyboard – lowercase


Alphabetical Keyboard – UPPERCASE

Touching this same button again, which now reads “abc”, will
bring back the alphabetical keyboard instead of the numerical
(3).
While in the numerical / symbol keyboard, you can touch the up
arrow button (1) and additional symbols (4) will appear.
To manually remove the onscreen keyboard, touch the
button at the top of all keyboards in the center (5 – icon
at right).
Numerical / Symbol Keyboard

Additional Symbols Keyboard (4)


To get to “System Settings”, touch the Settings icon from either application menu. 11-1 Status Provides status on the following:
Wi-Fi – shows your signal strength and the name of the wireless
device you are connected to.
Display – allows you to change your screen brightness.
Battery – shows the percent of battery remaining.
Storage – shows total space and available space in memory.
Selecting “more” in any of these boxes will take you directly to the
category‟s specific settings page.
11-2 Wireless & networks Manage the wireless settings on your gTablet.

Airplane mode – Disables all wireless connections in accordance
with airplane regulations.
Wi-Fi – Turn your wireless connection On or Off.
Wi-Fi Settings – Manage your wireless network settings, add a
network, and detect a network.
Bluetooth – Turns Bluetooth on or off.
Bluetooth settings – Scan for devices, manage connections, and
set device name. Bluetooth settings are only enabled when
Bluetooth is turned on.
Set up and manage wireless access points.
Advance settings – access additional settings including MAC address information. Scan for networks Add a Wi-Fi network Bluetooth Set Up


Wi-Fi Settings

11-3 Sound Allows user to manage audio and sounds on the gTablet.
Silent mode – makes all sounds except media & alarms silent. Audible selection – plays a sound when touching screen or making selections. Volume – control media and notification volume. Select notification tone – allows user to select the sound played when notifications such as emails or reminders are received. 11-4 Display Allows user to set display settings like brightness and screen timeout.

Auto-rotate screen – select to have screen switch orientation automatically when rotating tablet. Auto brightness – selecting automatically adjusts brightness of screen. Brightness – manually control the brightness of the LCD screen. Screen timeout – select the amount of delay before screen will timeout after no activity.


11-5 Family Accounts Manage account settings and profiles for multiple users. Add family member – select to add a family member to the profiles by adding the member as a new contact. Select from contacts – adds a new family member by selecting from an existing contact. Selecting a specific profile name will allow:
Changing colors used to identify Calendar, To-Do list, Email, etc.
Remove from family – removes profile from family list 11-6 Location, date & time Select and manage your location, date and time. Select time zone Set date Select date format – either dd mm yyyy, or mm dd yyyy Set time Use 24-hour format 11-7 Storage Manage your storage options. Tablet Storage Tablet system storage – shows total and available system storage Tablet data storage – shows total and available data storage - available to user Format tablet data storage – this erases your data permanently

Edit nickname · Edit contact details

SD card Note the micro SD card does not ship with the gTablet. SD card – Shows total and available space on external SD card. Unmount SD card – allows for safe removal of card. Once removed, you will not be able to save / store or access any data or files. Format SD card – formats the micro SD card (erases). This is not always required. The micro SD card in “ES File Explorer” is the “sdcard2” folder.
Warning: “Format tablet data storage” and “Format SD card” erases all data from the external micro SD card. 11-8 Security Set security features and restore software to factory settings. Visible password – selecting this box shows your password for a second as you type it. It then replaces it with bullet points for privacy. Factory data reset – ERASES all data on the device (except data stored on the internal data storage) putting the gTablet back to the original factory settings.



WARNING: Selecting “Factory data reset” will erase all data like Contacts and Email. Data saved on the internal storage will not be lost. Please be sure that this is what you want to do before selecting “reset”. This is an unrecoverable and permanent action! 11-9 Applications Manage your applications on the gTablet. Download applications – allows you to manage and remove downloaded applications. Running services – view currently running applications and select to stop the application from running. System applications – view and control applications pre-loaded on the gTablet. Development – contains settings that are useful for developing Android applications. Most users will NOT need to use this setting. 11-10 Language & keyboard Select language – select the language you wish to use for text.




Tap „n Tap Western Keyboard – screen allows user to manage and select keyboard options including play sounds on key press, auto
capitalize, quick fixes correcting commonly typed mistakes, show
suggestions, and auto-complete. 11-11 Accessibility
Accessibility is an Android service established for disabled individuals needing additional accessibility such as a “Text to Speech” application. 11-12 Battery Use Shows percent of battery life left, time since start up, time since last



unplugged, as well as Advanced battery use.

Advanced Battery use – opens a list of applications and operating system components you have used since last connected to a power source. This setting shows the applications in order of highest to lowest amount of power used. Select an application to review additional details about power use, and make adjustments where available. 11-13 About tablet About tablet provides user with information about the tablet and the applications and software. This includes legal information, version information, and software build revision information. The version information can be useful in the case of customer support.

12 CONNECTING TO YOUR G TABLET 12-1 Connect a micro SD Card The unit is designed with a micro SD Card slot which allows you to insert a micro SD card into the unit as shown right. This enables you to both access media and files as well as save media and files to the gTablet. You can open and play files directly from the micro SD card (such as music), or you can copy or delete the files to and from the micro SD card. The gTablet currently supports up to 64GB micro SD cards. It is recommended that the gTablet be used with at least a 32GB micro SD card to ensure the best user experience. For directions on accessing media files from your micro SD card, please refer to the section on Importing and Accessing Files.

The USB card can only be inserted in one orientation. Forcing the card in the wrong direction may result in damage. 12-2 Connect to PC The gTablet is designed with a mini-USB port which allows you to connect the unit to a PC. This feature enables you to download files such as, music, photos, video, etc. straight from your PC to the internal storage of the gTablet. It is also the most efficient and best way to import files to the gTablet. 12-3 Connect an Audio Device The gTablet supports headphones. See the headphone jack shown here. The speaker will turn off automatically after connecting external headphones to the gTablet.


Excessively loud volume could damage your hearing. Turn down the volume before connecting earphones, and then raise the volume to comfortable level. 12-4 Connect a USB Device The gTablet supports USB memory sticks up to 64 GB. This can be used to transfer / import music, photos, videos etc. into the gTablet. See Importing and Accessing Files section for additional details on how to import files using a USB memory stick. 13 CARING FOR YOUR G TABLET Caring for the LCD Screen
The LCD Screen is the most delicate component of the gTablet and comprised of thin glass. Please treat with care. DO NOT apply abrupt force as LCD screen may break.

Place the gTablet in carrying case to protect it from dirt, water, shock and scratches before traveling. DO NOT drop or place heavy objects on the LCD Screen. DO NOT scratch the LCD Screen with fingernails or hard objects. Use a soft and lint-free cloth to wipe your gTablet. Wipe gently in order to avoid damaging the LCD Screen. DO NOT use your hand to wipe the LCD Screen directly. Turn off the gTablet if it will not be used for a long time. DO NOT clean the LCD Screen with chemical cleaners, acidic cleaner, or spray cleaners. Ensure that the LCD screen does NOT come into contact with hard objects (e.g.: buttons, watchband, pen). DO NOT spill liquid on or into the gTablet as it can damage the components of the gTablet. To properly clean your LCD screen, use a product specifically designed for LCD TVs and computers. Caring for the Battery
The gTablet battery is a Lithium Ion rechargeable battery. Battery life
can be increased while using the gTablet by managing your LCD screen
brightness and your wireless (WiFi) connection. To maximize your
battery life, review the following:
Check your LCD screen brightness setting by tapping on the
“Settings” icon from the applications menu. Then tap on “Display”
and under “Brightness” move the slide bar towards the left to
decrease brightness. This will save battery power allowing your
gTablet to operate longer before needing to charge.
Turn your wireless (WiFi) connection to “Off” if you are not using
wireless. Do this by tapping on the “Settings” icon in the
Applications Task Bar. Then tap on “Wireless & networks” and turn
the wireless to “Off”. This will significantly contribute to your battery
life. Remember to turn this setting back on. You may also access
wireless settings by tapping on the “wireless” icon in the right hand
corner of the top status bar and turn the wireless to “Off”.

14 SAFETY PRECAUTIONS 1. DO NOT press or touch the LCD Screen or place items on the screen which will scratch. 2. DO NOT expose the gTablet to dirty, dusty, or moist environments. 3. DO NOT expose the gTablet to strong magnetic or electrical fields. 4. DO NOT leave the gTablet in the sun as it can damage the LCD Screen, especially in the car. 5. SAFE TEMPERATURE: The gTablet should only be used in environments with ambient temperatures between 41°F (5°C) and 95°F (35°C). 6. DO NOT expose the gTablet to liquids, rain, or moisture. 7. Caution: There is a risk of explosion if battery is replaced with an incorrect battery type. 8. DISPOSING: check local regulations for the proper disposal of electronic products. Please recycle the Battery Pack, and check with your Local Authority or retailer for recycling advice. 9. The gTablet and the Adapter can create heat while operating or charging. DO NOT leave the gTablet on your lap or any part of the body in order to prevent discomfort or injury from heat exposure. 10. INPUT RATING: Refer to the rating label on the gTablet and be sure that the Power Adapter complies with the rating. Only use attachments or accessories specified by the manufacturer. 11. Check the connections between the main unit and attachments before turning on the gTablet. 12. DO NOT insert anything into the gTablet that may result in short circuit or damage the circuit. 13. Power off the gTablet, if you want insert / attach or remove any external devices that do not support hot-plug. 14. Before cleaning, disconnect the gTablet from the electrical outlet and remove any installed batteries. 15. Keep gTablet away from children. 16. DO NOT disassemble the gTablet. Only a certified service technician should perform repairs on your gTablet. Otherwise, problem may result and the manufacturer will not be responsible for any damage. 17. DO NOT place the gTablet on soft surfaces (e.g.: bed, sofa, your lap), otherwise it maybe become too hot and halt the system. 15 FCC COMPLIANCE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference.

This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna on the affected receiver. Increase the separation between this device and the receiver. Connect this device into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced technician for help.
has been performed.

Q: What do I do if I can not turn on the gTablet? A: 1. If the power is low, connect to the electric outlets. 2. Make sure the indicator light indicator of the adapter is on. 3. Remove the micro-SD card and any other external device. Q: What do I do if water gets into the gTablet? A:
the system to the default status in Main Menu. Note that all of your personal data will be lost (emails, contacts, etc.). Data saved on the internal storage like photos and music files will not be lost. Be sure to back up files that you wish to save. Q: How do I prolong increase battery life? A: 1. Adjust the brightness of the LCD Screen to proper level. 2. Turn down the volume. 3. Turn off wireless if not in use. Q: What do I do if the camera image is not clear? A: Check that the lens is clean. If not, clean with the soft cloth. For Customer Service, please visit www.viewsonic.com/gtablet 17 SPECIFICATIONS
Size (inches) 10.1 inch
Display Features · Display Technology TFT-LCD


Aspect ratio 16:9 Panel manufacturer AU Optronics Corporation Panel type B101AW06 Driver system LED Resolution (480i/480p/720p/1080i) 1024 x 600
Brightness (cd/m2) 200 Contrast 500:1 Vertical viewing angle U/D (degrees) 15/35
Pixel Pitch(mm) 0.2175 (H)×0.2088(V) Maximum colors (millions) 262,144 Response time (ms) 8 Other: N/A


WiFi 802.11b/g/n Bluetooth Bluetooth 2.1 + EDR WiFi module WM-BN-BM-01 Bluetooth module WM-BN-BM-01

CPU Model Nvidia Tegra 2 Frequency 1GHz Core Model Dual ARM Cortex-A9 2D/3D Graphics Processor Yes Video Decode Yes, Up to HD (1080P) Video Encode Yes Audio Decode Yes Image Processor Yes
Memory Capacity

Nand Flash 512MB Mass Memory 16GB iNAND ( up to 32GB ) SD CARD Option ( up to 64GB )

Image .jpg、.tiff、.gif Document .txt Web Page .htm、.html

AMR-WB、AMR-NB WMA7、WMA8、WMA9、WMA10
PCM/WAV, SBC Speaker 1W x 2 Microphone Built in

Decode MPEG-4 – 1080p Simple Profile + B Frame
H.263 – D1 Profile 0 DiVX –1080p DiVX 4/5 XviD – 1080p XviD Home Theater
MPEG-2 – D1 MP@ML On2 – 720p VP6-E Advanced,VP6-S Simple

JPEG – up to 80 Mpixel per second Graphics Support OpenGL -ES 2.0
Support Language English Support Language Keyboard English(U.S.)、English(UK)
OS Android 2.2
Accelerometer Sensor Yes Ambient light Sensor Yes

USB Jack Mini USB USB TYPE-A SD Card Micro SD Dock HDMI/Headphone/USB
Primary 1.3M Mpix Video Conferencing 640 x 480

Battery Capacity 3650mAh Type Li-ion Polymer Battery UL Rated voltage 7.4V Dimensions 128*131*5.3(mm) Mass 2 Operating temperature 0° to 35° Storage temperature -20° to 45° Battery cycle times 300 Battery charging time 3 hours Adapter 12V/2A UL

Audio Play ( <5W ) Video Play ( <6W )
Internet ( <4.5W ) Standby ( <0.5W )
Height (mm/inches) 267 / 10.5” Width (mm/inches) 173 / 6.81” Depth (mm/inches) 14.3 / .7” Weight (kg/lbs) .816kg / 1.8lbs
UL, FCC, CE, RoHS
Design and specifications are subject to change without notice. The #
symbol means that the item is optional. For Customer Service, please visit www.viewsonic.com/gtablet.
Power Consumption · Size and Weight · Regulatory
Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.