Instruction/ maintenance manual of the product 85 Vidikron
Go to page of 100
1080p D LP™ PROJEC T ORS Vision 85 Vision 85/CineWide™ Vision 85/CineWide™ with AutoScope™ 85 VERSION 1.0 OWNER’S OPERA TING MANU AL.
.
Vidikron Vision 8 5 Owner’s Operating Manual iii PRE L IMINAR Y TWO YEAR LIMITED WARRANTY For Projectors, Video Pr ocessors and Controllers Congratulations on y our purchase of a Vidikro n video pro.
iv Vidikron Vision 8 5 Owner’s Operating Manual PRE L IMINAR Y This warranty begins on the effective date of delivery to th e end user. For your conven ience, keep the origin al bill of sale as evidence of the purchase date. Pl e as e f il l ou t a nd m a il y ou r w ar r a nt y re g i st r a ti o n c a rd .
Vidikron Vision 8 5 Owner’s Operating Manual v PRE L IMINAR Y To locate the name and address of the ne arest Vidikron Authoriz ed Service Center, or for additi onal information about this Limi ted W.
vi Vidikron Vision 8 5 Owner’s Operating Manual PRE L IMINAR Y Thank you for your purchase of th is quality Vidikron video projecto r! It h as been designed to provide you with the quality of v ideo that is expected in a home theater. For th e best performance, please read this manual carefully as it is your guide through the menus and operation.
Vidikron Vision 8 5 Owner’s Operating Manual vii 1 Table of Contents PRE L IMINAR Y TWO YEAR LIMIT ED WARRANTY ................ ................ ................ ................ ................ ............. iii Safety Precautions ... ............
Table of Contents viii Vidikron Vision 8 5 Owner’s Operating Manual PRE L IMINAR Y Installing the O ptional C ineWide Len s Mount .......... .......... ............. .......... .......... ........... .......... ......... ... 22 Installing the AutoScop e Lens Motor (Vision 8 5/CineWide with AutoScope) .
Vidikron Vision 8 5 Owner’s Operating Manual ix PRE L IMINAR Y On-Screen Menus for 10 8 0i (Digital) or 10 8 0p Signals .... ........... .......... .......... ........... .......... .......... .... 63 Main Men u ................. .......... ........
Table of Contents x Vidikron Vision 8 5 Owner’s Operating Manual PRE L IMINAR Y Notes:.
Vidikron Vision 8 5 Owner’s Operating Manual xi PRE L IMINAR Y 1 List of Figures 2-1. Vision 8 5 Front/Top /Side/Bottom/Rea r View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2-2. Vision 8 5 Rear P anel .
List of Figures xii V idikron Vision 8 5 Owner’s Operating Manual PRE L IMINAR Y 4-4. Typical Color Bar Patter n for Adjusting Color Saturation and Tint . . . . . . . . . . . . . . . . . . . . . . . . 53 4-5. Typica l Test Patte rn for Adjusting Sharpnes s .
Vidikron Vision 8 5 Owner’s Operating Manual 1 PRE L IMINAR Y 1.1 About This Manual This Owner’s Manual describes how to insta ll, set up and operate th e Vidikron Vision 8 5 DLP Projector and VHD Contr oller. Throughout this manual, the Vidikron Vision 8 5 DLP Projector and VH D Controller are referred to collectively as the “Vision 8 5.
Introduction 2 Vidikron Vision 8 5 Owner’s Operating Manual PRE L IMINAR Y Graphic Conv entions: These symbols appear in numerous plac es throughout the manu al, to emphasize points tha t you must keep in mi nd to avoid problems with your equipment or injury: 1.
Introduction Vidikron Vision 8 5 Owner’s Operating Manual 3 PRE L IMINAR Y 1.3 Description, Features and Benefits The all-new Vision 8 5 DLP Pr ojector and VHD Control ler is the most high performa nce single-chip DLP™ 1920 x 10 8 0 projection system available.
Introduction 4 Vidikron Vision 8 5 Owner’s Operating Manual PRE L IMINAR Y Key Features and Benefits The Vision 8 5 offers these key fe atures and benefits: • Vidikron-engineere d, Enhanced GEN 3 .
Vidikron Vision 8 5 Owner’s Operating Manual 5 PRE L IMINAR Y 2.1 Vision 85 at a Glance Figure 2-1 shows th e key Vision 8 5 components. Figure 2-1. Vision 85 Fron t/Top/Side/Bottom/Rear View 2.
Controls and Functions 6 Vidikron Vision 8 5 Owner’s Operating Manual PRE L IMINAR Y 1. VERTICAL LENS SHIFT Using a 9/64” hex wrench, turn this to move th e lens up or down . 2. POWER LED Lights red to indicate that the projector is in standby; flashes blue during wa rm-up or cool-down or lights blue to indicate normal o peration.
Controls and Functions Vidikron Vision 8 5 Owner’s Operating Manual 7 PRE L IMINAR Y 2.2 Vision 85 Rear Panel Figure 2-2 shows th e Vision 8 5 rear panel. Figure 2-2. Vision 85 Rear Panel 1. POWER INPUT (100 to 240 V A C) Connect the Vision 8 5 to power here.
Controls and Functions 8 Vidikron Vision 8 5 Owner’s Operating Manual PRE L IMINAR Y 2.3 VHD Controller Front Panel Figure 2-3 show s the controls and indicators on the VHD Controller front panel; the paragraphs that fo llow describe them. Figure 2-3.
Controls and Functions Vidikron Vision 8 5 Owner’s Operating Manual 9 PRE L IMINAR Y 2.4 VHD Controller Rear Panel Figure 2-4 shows th e rear conn ector panel on the VH D Controller. Figure 2-4. VHD Controller Rear Panel Outputs 1. HDMI OUT Connect this to the HDMI Input on the Vision 8 5 (see Figure 2-2 ).
Controls and Functions 10 Vidikron Vision 8 5 Owner’s Operating Manual PRE L IMINAR Y 5. C OMPOSITE VIDEO INPUT Standard composite video input for connecting a VCR, laser disc player o r other composite video source.
Controls and Functions Vidikron Vision 8 5 Owner’s Operating Manual 11 PRE L IMINAR Y 2.5 Vision 85 Remote Control Unit Figure 2-5 shows th e Vision 8 5 re mote control, and the paragraphs that follo w describe its functionality .
Controls and Functions 12 Vidikron Vi sion 8 5 Owner’s Operating Manual PRE L IMINAR Y 1. IR OUTPUT INDICA T OR Lights when a button is pressed to indicate that an IR signal is being transmit ted. 2. LIGHT Press to illuminate the buttons. 3. ON / OFF Press to turn the pr ojector on or off.
Controls and Functions Vidikron Vision 8 5 Owner’s Operating Manual 13 PRE L IMINAR Y Memory Preset Buttons: 8 . ISF NT (Night) Press to recall settings for the current in put from the “ISF Night” memory preset. 9. ISF DA Y Press to recall settings for the current input from the “ISF Day” memory preset.
Controls and Functions 14 Vidikron Vi sion 8 5 Owner’s Operating Manual PRE L IMINAR Y 2.6 Vision 85 Built-In Keypad The Vision 8 5 has a built-in keypad th at you can use to access th e menu system for working with digital 10 8 0i or 10 8 0p sources.
Vidikron Vision 8 5 Owner’s Operating Manual 15 PRE L IMINAR Y 3.1 Remote Control Battery Installation To install batteries in the remote control: 1. Remove the battery cover from th e back of the remote control. 2. Insert the batteries in cluded with the remote control.
Installation 16 Vidikron Vi sion 8 5 Owner’s Operating Manual PRE L IMINAR Y • Do not drop the remote co ntrol or expo se it to moisture or high temperature. • The remote c ontrol ma y malfun ction under a fl uorescent lamp. If that occurs, move the VHD Controller away fr om the fluorescent lamp.
Installation Vidikron Vision 8 5 Owner’s Operating Manual 17 PRE L IMINAR Y 3.2 Quick Setup Table 3-1 gives a quick overview of the Vision 8 5 installation process. The sections following this one provide detailed instructions. Installation should be performed by a qualified custom video installation specia list.
Installation 1 8 Vidikron Vision 8 5 Owner’s Operating Manual PRE L IMINAR Y 3.3 Installation Considerations Proper installation of your projector will ensure the quality of yo ur display. Whethe r you are installing a pro jector temporarily or permanentl y, you should take the following into account to ensure your projec tor performs optimally.
Installation Vidikron Vision 8 5 Owner’s Operating Manual 19 PRE L IMINAR Y Throw Distance Throw distance is the distance measured fro m th e front of the projector to the screen.
Installation 20 Vidikron Vi sion 8 5 Owner’s Operating Manual PRE L IMINAR Y Vertical and Horizontal Position Proper placeme nt of the projector relative to the screen will yield a rectangula r, perfectly-centered image that completely fills the scre en.
Installation Vidikron Vision 8 5 Owner’s Operating Manual 21 PRE L IMINAR Y The V ision 85 provides up to 50% of v ertical lens shif t in either direction. For exam ple, with a 96 x 54- inch (16:9) screen, y ou can shift the image up to 27.00 inches (0 .
Installation 22 Vidikron Vi sion 8 5 Owner’s Operating Manual PRE L IMINAR Y 3.4 Installing the Optional CineWide Lens Mount If you are in stalling a standard (non-Cin eWide) Vision 8 5, skip this step and proceed with Mounting the Vision 85 ( page 27 ).
Installation Vidikron Vision 8 5 Owner’s Operating Manual 23 PRE L IMINAR Y Installing the AutoScope Lens Motor (Vision 85/CineWide with AutoScope) Figure 3-6 shows th e Vision 8 5/Cin eWide with AutoScope motor asse mbly.
Installation 24 Vidikron Vi sion 8 5 Owner’s Operating Manual PRE L IMINAR Y Install Ceiling Mount Adapters/Projector Stands: For ceiling installati ons, these brackets bring the mounting points for.
Installation Vidikron Vision 8 5 Owner’s Operating Manual 25 PRE L IMINAR Y Install Lens Motor: Position the Auto Scope Lens Motor (it em #1) as shown in Figure 3- 8 . Line up the moun ting holes on the l ens motor housing w ith those on the unde rside of the projector.
Installation 26 Vidikron Vi sion 8 5 Owner’s Operating Manual PRE L IMINAR Y Installing the Fixed CineWide Base Plate (Vision 85/CineWide) To install the fixed Cine Wide base plate on a Vision 8 5/CineWide: 1. Place the projector upside down on a blanket or other so ft surface.
Installation Vidikron Vision 8 5 Owner’s Operating Manual 27 PRE L IMINAR Y 3.5 Mounting the Vision 85 There are several methods for mounting th e projector.
Installation 2 8 Vidikron Vision 8 5 Owner’s Operating Manual PRE L IMINAR Y 3.6 Connections to the Vision 85 and VHD Controller Proceed as follow s to connect th e VHD Controller to the Vision 8 5, your video sources, external cont roller(s) – if pr esent – and AC pow er.
Installation Vidikron Vision 8 5 Owner’s Operating Manual 29 PRE L IMINAR Y Connecting Source Components to the VHD Controller Connect your video sour ces to the VHD C ontroller as show n and described in the sections that follow. HDMI Connections: See Figure 3-11.
Installation 30 Vidikron Vi sion 8 5 Owner’s Operating Manual PRE L IMINAR Y Digital (DTV) RGB or Component Video Connections: See Figure 3-12. Figure 3-12.
Installation Vidikron Vision 8 5 Owner’s Operating Manual 31 PRE L IMINAR Y Analog (Computer) RGB Connections: See Figure 3-13. Figure 3-13. Analog RGB Connections HD1 HD2 G/Y INPUTS HV R/Pr B/Pb G/.
Installation 32 Vidikron Vi sion 8 5 Owner’s Operating Manual PRE L IMINAR Y Composite/S-Video/Compon ent Video Connections: See Figure 3-14. Figure 3-14.
Installation Vidikron Vision 8 5 Owner’s Operating Manual 33 PRE L IMINAR Y Connecting a PC or Automation System to the VHD Controller Use a straight-through, 9 -pin RS-232 cable to co nnect a PC or ho me theater control/automation syste m (if present) to the R S-232 Control port o n the VHD Controller; se e Figure 3-15 .
Installation 34 Vidikron Vi sion 8 5 Owner’s Operating Manual PRE L IMINAR Y Connecting 12-Volt Trigger Outputs to External Equipment VHD Controller: If your Vision 8 5 is equipped with a CineWide with AutoScope system, connect the AutoScope lens mo tor to a 12-vol t trigger output on the VHD Controller; see Figure 3-16 .
Installation Vidikron Vision 8 5 Owner’s Operating Manual 35 PRE L IMINAR Y Projector: The projector is equipped with an addition al 12-volt tr igger ou tput. This trigger activates when the projector is turned o n. Connect it to your retractabl e scre en or other, 12-volt trigger-activated equipment as sho wn in Figure 3-17 .
Installation 36 Vidikron Vi sion 8 5 Owner’s Operating Manual PRE L IMINAR Y Connecting to AC Power The Vision 8 5 system includes tw o (2) AC power cords (o ne each for the VH D Controller and projector).
Installation Vidikron Vision 8 5 Owner’s Operating Manual 37 PRE L IMINAR Y 3.8 Adjusting the Picture Orientation By default, the Vision 8 5 is configured for a “floor/front” in sta llation, in whic h the pr ojector is installed upright and in front of the screen.
Installation 3 8 Vidikron Vision 8 5 Owner’s Operating Manual PRE L IMINAR Y 3.10 Installing and Adjusting the CineWide Anamorphic Lens If you are installing a CineWide-equipped projec tor, proceed as follo ws to install and adjust the anamorphic le ns.
Installation Vidikron Vision 8 5 Owner’s Operating Manual 39 PRE L IMINAR Y 3. Secure the lens assembl y to the base plate with the Yaw/Z-Adjustme nt Knobs and Washers (item #4). Adjusting the Lens Height (Y): 1. Project a white field on the screen.
Installation 40 Vidikron Vi sion 8 5 Owner’s Operating Manual PRE L IMINAR Y The anamorph ic lens will almost always be angled with respec t to the projec tor; this is normal. Onc e the proper le ns angle has been set, firmly tigh ten the P itch A djustment Scr ews to secure the lens in place.
Installation Vidikron Vision 8 5 Owner’s Operating Manual 41 PRE L IMINAR Y Anamorphic Lens Installation and Adjustment - Vision 85/CineWide with AutoScope The Vision 8 5 Anamorphic lens mount k it consists of everything shown in Figure 3-21.
Installation 42 Vidikron Vi sion 8 5 Owner’s Operating Manual PRE L IMINAR Y Attach Lens Mounting Assembly to Lens Motor Carriage Plate: 1. Remove the two Yaw/X Ad justment Levers (item # 8 ) from the bottom of the Anamorphic Lens Holder (item #5). 2.
Installation Vidikron Vision 8 5 Owner’s Operating Manual 43 PRE L IMINAR Y Configure Lens Motor Trigger: CineWide with AutoScope maintains const ant image height independent of the aspect ratio, wh ile using the full display resolution of the projecto r.
Installation 44 Vidikron Vi sion 8 5 Owner’s Operating Manual PRE L IMINAR Y Adjusting the Height (Y): With the white field still on-screen, loosen the Height/Y Adjustment T-Screws on either side of the le ns.
Installation Vidikron Vision 8 5 Owner’s Operating Manual 45 PRE L IMINAR Y Adjusting the Yaw: Loosen the Yaw/X-Adjustment Lever s to allow the lens to pivot freely from side to side.
Installation 46 Vidikron Vi sion 8 5 Owner’s Operating Manual PRE L IMINAR Y Adjusting the Geometry: 1. Input an anamorphic cross-hatc h test pattern to the pr ojector. 2. Unscrew the Anamorph ic Lens just en o ugh to allow it to rotate freely. 3. Grasp the lens by the center ring and r o tate the lens until the image is properly anamorphic: 4.
Vidikron Vision 8 5 Owner’s Operating Manual 47 PRE L IMINAR Y 4.1 Using the On-Screen Menus Press the MENU button on either the remote cont rol or the VHD Controller front panel to display the Main Menu. To select a me nu item, use the and buttons on either the re mote control or the VHD Controller front panel to highlight it.
Operation 4 8 Vidikron Vision 8 5 Owner’s Operating Manual PRE L IMINAR Y Figure 4-1. VHD Controller OSD Menu Structure for Vi sion 85 (1080i Analog and Lower-Resolution Sources) Service Test Video .
Operation Vidikron Vision 8 5 Owner’s Operating Manual 49 PRE L IMINAR Y Main Menu The Main Menu is the starting point for accessing all projector functions. (The Calibration and Service men us are hidden and not accessible until you enter a passcode.
Operation 50 Vidikron Vi sion 8 5 Owner’s Operating Manual PRE L IMINAR Y Table 4-1. Aspect Ratio Settings Aspect Ratio Description 16:9 Select 16:9 to view 16:9 DVDs and HDTV programs in their native aspect ratio. 4:3 images are stretched horizontally to fit a 16:9 screen.
Operation Vidikron Vision 8 5 Owner’s Operating Manual 51 PRE L IMINAR Y Picture Use the controls in the Picture Menu to calibr ate your Vision 8 5 for optimum picture quality. The Vision 8 5 has been designed to incorporate setu p and calibration standards established by the Imaging Science Founda tion (ISF).
Operation 52 Vidikron Vi sion 8 5 Owner’s Operating Manual PRE L IMINAR Y Although it may be possible to obtain satisfactory picture quality using the naked eye and regular program mate rial, Vidikr.
Operation Vidikron Vision 8 5 Owner’s Operating Manual 53 PRE L IMINAR Y Contrast: On your external test pattern source, sele ct a stepped, gray-b ar pattern like the one shown in Figure 4-3 . Figure 4-3. Typical Gray Bar Pattern for Adjusting Contrast Select Contrast and press ENTER .
Operation 54 Vidikron Vi sion 8 5 Owner’s Operating Manual PRE L IMINAR Y Select Color and press ENTER . While looking at the color bar pattern through a blue filter, adjust the color saturation lev.
Operation Vidikron Vision 8 5 Owner’s Operating Manual 55 PRE L IMINAR Y Sharpness: “Sharpness” is the amoun t of high-frequ ency detail in the image. To adjust sharpness, select Sharpness fr om the Picture menu and press ENTER . On your external test pattern source, se lect a pattern like the one shown in Figure 4-5 .
Operation 56 Vidikron Vi sion 8 5 Owner’s Operating Manual PRE L IMINAR Y Some television programs are produced based on the a ssumption that older television sets may not display the outer edge s of th e broadcast picture ar ea.
Operation Vidikron Vision 8 5 Owner’s Operating Manual 57 PRE L IMINAR Y Calibration Use the Calibration menu to perform ad vanced picture qual ity adjustments.
Operation 5 8 Vidikron Vision 8 5 Owner’s Operating Manual PRE L IMINAR Y ISF Night - Input Image: The Input Image co ntrols are similar to tho se in the Picture menu, but are accessible only by enteri ng the Calibration menu passcod e.
Operation Vidikron Vision 8 5 Owner’s Operating Manual 59 PRE L IMINAR Y • V idikron/ISF Logo Splash Screen T imers: When you turn on the Vision 8 5, it project s a welcome screen with th e Vidikron logo followed by one with the ISF logo. Select S plash Timer from the Splash Configure menu to set the amount of time that these two images appear.
Operation 60 Vidikron Vi sion 8 5 Owner’s Operating Manual PRE L IMINAR Y Remote Control: The Remote Control menu shows you the primary and secondar y infrared (IR) codes to which the Vision 8 5 will respond.
Operation Vidikron Vision 8 5 Owner’s Operating Manual 61 PRE L IMINAR Y Display Device: The options in the Displa y Device menu allow you to change the picture orientation, adjust the amo unt of overscan an d access other projecto r-specific functions.
Operation 62 Vidikron Vi sion 8 5 Owner’s Operating Manual PRE L IMINAR Y Miscellaneous: Select Miscella neous from the S ervice menu to set the following options: • Language: Select Langua ge from the Miscell aneous menu and pr ess the up- or down-arrows to select the OSD Language.
Operation Vidikron Vision 8 5 Owner’s Operating Manual 63 PRE L IMINAR Y 4.3 On-Screen Menus for 1080i (Digital) or 1080p Signals After you ha ve finished calibratin g the projector to o ptimize the.
Operation 64 Vidikron Vi sion 8 5 Owner’s Operating Manual PRE L IMINAR Y Main Menu Press MENU on either th e remote contr o l or built-in keypad ( on the projector rear panel) to display the Main Menu. The Main Menu is th e starting point for calibrating the Vision 8 5 to optimize the display of digital 10 8 0i a nd 10 8 0p sources.
Operation Vidikron Vision 8 5 Owner’s Operating Manual 65 PRE L IMINAR Y Picture Adjust To perform basic picture quality adjustments, select Picture Adjust from the Main Menu and proceed as follows: Picture Memory: The Vision 8 5 lets you save image quality settings as presets that you can recall at a la ter time.
Operation 66 Vidikron Vi sion 8 5 Owner’s Operating Manual PRE L IMINAR Y Contrast: Refer t o Contrast on page 53. Brightnes s: Refer to Brightness on page 52. Color: Refer to Color Saturation on page 53. Tint: Refe r to Tint on page 54. Sharpness: Refer to Sharpness on pa ge 55.
Operation Vidikron Vision 8 5 Owner’s Operating Manual 67 PRE L IMINAR Y Picture Adjust (Advanced) To access advanced picture quality settings, se lect Advanced from the Picture Adjust menu. This sub-menu presents the following optio ns: ACC Adjust: Select ACC Adjust from the Advanced Picture Adjust menu to customize the displayed color spa ce.
Operation 6 8 Vidikron Vision 8 5 Owner’s Operating Manual PRE L IMINAR Y Table 4-3 describe s the effects of adjusting the primary co lor hues. • Saturation: This slidebar adjusts the co lor saturation level – the amount of that col or in a video image.
Operation Vidikron Vision 8 5 Owner’s Operating Manual 69 PRE L IMINAR Y Automatic Contrast: The Vision 8 5 can dynamicall y adjust the contrast (w hite level) according to the color content in the signal, to produce the best picture quality. Select Automatic Contrast from the Picture Adjust menu to activate this featur e.
Operation 70 Vidikron Vi sion 8 5 Owner’s Operating Manual PRE L IMINAR Y Options Select Options from the Main Me nu to perform the follow ing projector configuratio n tasks. Image Shift: Select Image Shift from the Options me nu to vertically shift the projected image.
Operation Vidikron Vision 8 5 Owner’s Operating Manual 71 PRE L IMINAR Y HDMI Black Level: This control compensates for incoming el evated black levels present in certain vi deo signals. When yo u set it to Auto, the Vision 8 5 automatically determines the best setting according to the incoming video signal type.
Operation 72 Vidikron Vi sion 8 5 Owner’s Operating Manual PRE L IMINAR Y Notes:.
Vidikron Vision 8 5 Owner’s Operating Manual 73 PRE L IMINAR Y 5.1 Lamp Replacement The lamp should be r eplaced when it re aches the end of its life (typically 2000 hours), or sooner if a noticeable de grad ation in brightness occurs. Cont act your Vidikr on dea ler to obtain a replacement lamp.
Maintenance and Troubleshooting 74 Vidikron Vi sion 8 5 Owner’s Operating Manual PRE L IMINAR Y 5.2 Troubleshooting Tips Table 5-1 provides some ge neral guidelines for t roubleshooting problems you may encounter with the Vision 8 5.
Maintenance and Troubleshooting Vidikron Vision 8 5 Owner’s Operating Manual 75 PRE L IMINAR Y Image geometry is incorrect. • Incorrect aspect ratio selection. • Image height may need adjusting (Vision 8 5/CineWide only). • Select the aspect ratio that best matches the source image and screen size (refer to Table 4-1 ).
Maintenance and Troubleshooting 76 Vidikron Vi sion 8 5 Owner’s Operating Manual PRE L IMINAR Y Notes:.
Vidikron Vision 8 5 Owner’s Operating Manual 77 PRE L IMINAR Y 6.1 RS-232 Connection and Port Configuration To interface the VHD Controller with a home theater automati on/control system or a PC running terminal e mulation softwar e, connect it to your contr ol system or PC as sh own in Figure 3-15 .
Serial Communications 7 8 Vidikron Vision 8 5 Owner’s Operating Manual PRE L IMINAR Y Input Selection Commands COMPONENT NA YES Selects the Component input COMPOSITE NA YES Selects the Composite vid.
Serial Communications Vidikron Vision 8 5 Owner’s Operating Manual 79 PRE L IMINAR Y Picture Adjust Commands (not available on HDMI 1 or HDMI 2 inputs) BRIGHTNESS -100/100 YES Sets a value for brigh.
Serial Communications 8 0 V idikron Vision 8 5 Owner’s Operating Manual PRE L IMINAR Y Input Position Commands (not available on HDMI 1 or HDMI 2 inputs) IHEIGHT -100/100 YES Sets the value for inpu.
Serial Communications Vidikron Vision 8 5 Owner’s Operating Manual 8 1 PRE L IMINAR Y Miscellaneous Commands BKGND -100/100 YES Sets the background colo r for 4:3 aspect ratio (-100 = black; 100 = w.
Serial Communications 8 2 V idikron Vision 8 5 Owner’s Operating Manual PRE L IMINAR Y Notes:.
Vidikron Vision 8 5 Owner’s Operating Manual 8 3 PRE L IMINAR Y 7.1 Vision 85 Specifications Table 7-1 lists the Vision 8 5 specifications. 7 Specifications Table 7-1.
Specifications 8 4 V idikron Vision 8 5 Owner’s Operating Manual PRE L IMINAR Y Brightness and Contrast (variable, depending on VAC calibration): Cinema Standards Measurement System (CSMS) Specifications - Brightness: 16.
Specifications Vidikron Vision 8 5 Owner’s Operating Manual 8 5 PRE L IMINAR Y 7.2 VHD Controller Specifications Table 7-2 lists the VHD C ontroller specifications. Table 7-2. VHD Controller Specificat ions Aspect Ratios: 4:3, Letterbox, 16:9, IntelliWide, Cinema, IntelliWide 2.
Specifications 8 6 V idikron Vision 8 5 Owner’s Operating Manual PRE L IMINAR Y 7.3 Vision 85 Dimensions Figure 7-1 show s the Vision 8 5/CineWide with AutoScope dimensions (all dimensio ns are in inches). Figure 7-1. Vision 85/CineW ide with AutoScope Dimensions 0 9.
.
Vidikron 2900 F aber Street Union City , CA 94587 510-324-5900 F ax 510-324-5905 1-888-4-VIDIKRON www.vidikron.com SERIAL NUMBER RUMA-011220 rev. 05-29-07 v2.
An important point after buying a device Vidikron 85 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vidikron 85 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vidikron 85 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vidikron 85 you will learn all the available features of the product, as well as information on its operation. The information that you get Vidikron 85 will certainly help you make a decision on the purchase.
If you already are a holder of Vidikron 85, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vidikron 85.
However, one of the most important roles played by the user manual is to help in solving problems with Vidikron 85. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vidikron 85 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
