Instruction/ maintenance manual of the product PMC-05ProIII Vestax
Go to page of 12
OWNER'S MANUAL PMC-05P3/E 03.8.19 2:58 PM ページ 12.
2 CONGRA TULA TIONS ！ The lightning flash with arrowhead symbol，within an equilateral triangle，is intended to alert the user to the presence of uninsulated“dangerous voltage ”within the prod.
3 1. Read instructions-All the safety and operating instructions should be read before the appliance is operated. 2. Retain instructions-The safety and operating instructions should be retained for future reference. 3. Heed W arnings-All warnings on the appliance and in the operating instructions should be adhered to.
4 16. Replacement Parts-When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characterristics as the original parts. Unauthorized substitutions may result in fire, electric shock or other hazards.
5 FUNCTIONS TOP P ANEL PMC-05P3/E 03.8.19 2:58 PM ページ 8.
q MAIN MIC LEVEL Adjusts the input level of the MAIN MIC input. w MIC EQs Adjusts the HI and LOW frequencies for both the MAIN and SUB MIC input. e MIC P AN Adjusts the panning for both the MAIN and SUB MIC. r TRIM (PGM1/PGM2) Adjusts the input level of each channel.
7 24 25 28 26 27 31 30 29 FRONT P ANEL REAR P ANEL @3 EFFECT SEND JA CK Connect to the input of the external effects. (Delay, Reverb etc) @1 PHONE JA CK Connect the headphones with the impedance of 8ohm to 600ohm. @2 EFFECT RECEIVE JA CK Connect to the output of the external effects.
8 q Remove the fader knobs. (See fig-a) w Remove the 4 screws which fix the top panel. (See fig-a) e Remove the 2 screws which fix the fader panel, and remove the fader unit from position in mixer. (See fig-b) r Carefully remove the multi-cable connector from the fader unit.
9 HOW TO CHANGE INPUT SELECT SWITCH HOW TO CHANGE THE DIRECTION INPUT SELECT SWITCH q Remove the top panel in the same procedure. (See fig-a) w Remove the 2 screws which fix the switch panel, fix the switch panel, and remove the switch unit from position in mixer.
10 CONNECTION PMC-05P3/E 03.8.19 2:58 PM ページ 9.
11 SPECIFICA TION NOMINAL INPUT LEVEL IMPEDANCE MIC -54dBv 3.3kΩ LINE -10dBv 10kΩ PHONO -42dBv 56Ω RCV -10dBv 10kΩ NOMINAL OUTPUT LEVEL IMPEDANCE LINE -10dBv 2kΩ PHONES 58mW MAX（@47Ω） ≧8Ω SEND ‐10dBv 2kΩ FREQUENCY RESPONSE 25Hz∼25kHz CROSS TALK ≧100dB SN RATIO ≧75dB THD ＜0.
V estax Corpor ation AUG.2003 PMC-05Pro III E q PMC-05P3/E 03.8.19 2:58 PM ページ 11.
An important point after buying a device Vestax PMC-05ProIII (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vestax PMC-05ProIII yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vestax PMC-05ProIII - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vestax PMC-05ProIII you will learn all the available features of the product, as well as information on its operation. The information that you get Vestax PMC-05ProIII will certainly help you make a decision on the purchase.
If you already are a holder of Vestax PMC-05ProIII, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vestax PMC-05ProIII.
However, one of the most important roles played by the user manual is to help in solving problems with Vestax PMC-05ProIII. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vestax PMC-05ProIII along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
