Instruction/ maintenance manual of the product PMC 500 Vestax
Go to page of 16
OWNER'S MANUAL.
2 CONGRA TULA TIONS ！ The lightning flash with arrowhead symbol，within an equilateral triangle，is intended to alert the user to the presence of uninsulated“dangerous voltage ”within the prod.
3 1. Read instructions-All the safety and operating instructions should be read before the appliance is operated. 2. Retain instructions-The safety and operating instructions should be retained for future reference. 3. Heed W arnings-All warnings on the appliance and in the operating instructions should be adhered to.
4 15. Damage Requiring Service-Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power -supply cord or plug is damaged. b. If liquid has been spilled or objects have fallen into the product.
5 FUNCTIONS INPUT SECTION MASTER SECTION MONITOR SECTION CROSS FADER SECTION FEA TURES ・The PMC-500 has Five (5) dedicated line channels, each with a three (3) band isolator (HI, MID, LOW), seven (7) segment level indicator, numerous input options, great effects controls and super smooth 60mm tight torque rail slide fader.
q LINE INPUT RC A J A CK Input connectors for line level equipment such as CD players, MD players, tape decks, DAT and VTR etc. w MIC EQ (HI/LOW) Adjusts the HI and LOW frequencies for the MIC input. e MIC LEVEL Adjusts the input level of the MIC input.
7 CROSS F ADER SECTION !9 CROSS F ADER Mixes the signals assigned by the C.F. ASSIGN SWITCH !4 to either side of the crossfader. When the crossfader is set in the center position, both the left and right signals will be heard. This fader is user replaceable and may be changed easily by following this user guide's instructions carefully.
8 #1 METER ASSIGN SWITCH Use this switch to select either MASTER OUT 1 or 2 to be shown in the MASTER LEVEL METER #0 . #2 POWER LED This LED will be illuminated when the POWER SWITCH %4 is on. #3 A UX SEND LEVEL Adjusts the output level sent to an external effects unit connected to the AUX SEND JACK $9 on the rear panel.
9 REAR P ANEL 51 52 54 46 45 53 48 50 49 47 56 55 44 43 $3 MIC1 INPUT J A CK Input jack for MIC. MIC1: PHONE JACK (UNBALANCED) MIC2: XLR JACK (BALANCED) $4 EFFECT LOOP J A CK TIP: SEND OUT RING: RETURN INPUT SLEEVE: EARTH Connects to the input of an external effects device.
10 %4 FIRE EV ACU ATION CONTROL (J ACK) This feature has been added in order to ensure that venues using the PMC-500 are in compliance with modern fire safety standards.
11 ■ Change to "IF-500" q Re1.Remove the fader knobs. (See fig-a) w Remove the 4 screws which fix the input fader panel to the mixer. (See fig-b) e Remove the 2 screws which fix the input fader. (See fig-c) r Remove the input fader, and carefully remove the multi-cable connector from the fader unit.
12 ■ Change to "CF-PCV" q Remove the fader knob and 3 screws which fix the crossfader panel, and the carefully remove the panel. (See fig-e) w Remove the 2 screws affixing the crossfader unit. (See fig-f) e Carefully remove the multi-cable connector from the fader unit.
13 BLOCK DIAGRAM.
14.
.
V estax Corpor ation AUG.2003 PMC-500E q.
An important point after buying a device Vestax PMC 500 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vestax PMC 500 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vestax PMC 500 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vestax PMC 500 you will learn all the available features of the product, as well as information on its operation. The information that you get Vestax PMC 500 will certainly help you make a decision on the purchase.
If you already are a holder of Vestax PMC 500, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vestax PMC 500.
However, one of the most important roles played by the user manual is to help in solving problems with Vestax PMC 500. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vestax PMC 500 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
